Spoke 2.0 14G x 281 Niro

€0.49*

Product number: 2.0-281-Niro
Product information "Spoke 2.0 14G x 281 Niro"

Spoke 2.0 14G x 281 Niro

Size: 2,0 x 281 mm (~0,08 x 11,06 inches)

1 piece without nipple

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Headlight Bracket for Stem 25,4 mm SW501
Headlight Bracket for Handlebar Stem galvanized for 25,4 mm (~1 inch) handlebar stems or shafts or else Length: about 90 mm (~3,54 inches)

€4.95*
1/2 to 9/16 Pedal Thread Adaptors Z-1320
1/2" to 9/16" Pedal Thread Adaptors Black, CRO MO These adaptor bushings have a male 1/2"-20 thread to fit into your one-piece crank, and a standard 9/16"-20 female thread that will let you install standard 9/16" pedals, even modern clipless pedals. These install with a 15 mm (~0,59 inches) pedal wrench. Length over all: 32 mm (~1,26 inches) Brings the pedal 21 mm (~0,83 inches) more out Weight 54 gr. (~0,12 pounds)/pair Perfect Quality 9/16 Zoll = 14.28 mm 11/20 Zoll = 14 mm 1/2 Zoll = 12.7 mm

€23.95*
Tire Beach Bum 26 x 3.0 whitewall CC2630BkWh
Tire Beach Bum 26 x 3.0 whitewall  70-559 100 - 250 KPa 1.0 - 2.5.Bar 15-36 PSI 1,43 kg (~3,15 pounds)

€35.95*
Double Crown Fork long shaft, offset 84, black 7689
Double Crown Fork long shaft, offset 84, black noble and supercool, for 20-28 inch. wheels, 1" inch steerer alloy triple trees and black steel fork tubes with mount for disc brake steerer length: 320 mm (~12,60 inches) fork tube inner width: about: ~ 92 mm (~3,62 inches) fork tube length: about: ~ 840 mm (~33,07 inches) Width between dropouts: ~ 100 mm (~3,94 inches) The length of shaft can be adjusted Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches) inner diameter of fork legs: ~ 28,8 mm (~1,13 inches) Offset between shaft and fork legs: ~ 50 mm (~1,97 inches) Bridges are mounted with allen screws Fork tubes can be shortened above

€129.95*
Fender Set 24 inch. with Ducktails, chrome Y225
Fender Set 24 inch. with Ducktails, chrome fender set for 24 inch. bikes, chrome-plated, with fender struts for cruisers or similar bike types width: 80 mm (~3,15 inches) height: 26 mm (~1,02 inches) Inside diameter: approx. 635 mm (~25 inches) Outside diameter: approx. 695 mm (~27,36 inches) On chainside of the rear fender you will find a benting to give way to the chain. Won't fit full ballon tires 24 x 3. Here 26 inch  80 mm fender fits pretty good. 

€28.95*
24 x 3.0 Thick Brick Tire Whitewall Y485N
Thick Brick 24 x 3.0 Whitewall (75-507) THE ultra fat custom tire !!! The ultimate custom cruiser and lowrider tire for maximum show performance! Compatible with : Classic Cycle rims - 24" 30 - 82 mm wide Specifications: ETRTO: 75 - 507 Width of the inflated tire: ~ 75 mm Mounted on an 82 mm wide rim, the tire is approximately 87 mm wide. Total diameter of the tire mounted on a 82 mm wide rim: ~ 665 mm Weight: ~ 1.3 kg Height: Thick Brick tire is built approximately 66 mm above the rim edge Pressure: 30 - 40 PSI / 2.1 - 2.8 bar Please check the spacing to the frame and/or fork We recommend not to inflate the tire above 30 PSI / 2.0 bar for rims that are too wide, otherwise the sidewall thread may tear. Scope of delivery: 1 piece

€39.95*