Spoke 2.0 14G x 282 chrome plated

€0.59*

Product number: 2.0-282cp
Product information "Spoke 2.0 14G x 282 chrome plated"

Spoke 2.0 14G x 282 chrome plated

Size. 2,0 x 282 mm (~0,08 x 11,10 inches)

1 piece without nipple

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Head Set Adapter 1 - 1 1/8 inch. 390627
Head Set Adapter kit 1 - 1 1/8 inch. 2 pieces, alloy to install into head of the frame to reduce head tube for using head set with smaller diameter to reduce 1 1/8" to 1" outer diameter: 34,0 mm (~1,34 inches) inner diameter: 30,2 mm (~1,19 inches)

€4.95*
Sissybar Long 95, black Y696
Sissybar Long 95, black 950 mm (~27,40 inches) to rear axle mounting distance axle to saddle: about 45 - 55 cm (~17,72 - 21,65 inches) tube diameter: about 16 mm (~0,63 inches)

€42.95*
Tire Liner for tires 20-29 inch , width 100 mm / ~3,94 inch CLSBND100x13x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 100 mm (~3,94 inches)  Thick: 1,3 mm (~0,051 inches) Length: 2350 mm (~ 92,52 inches) ~ 400 g (~ 0,88 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€18.95*
Bottom Bracket Bearing Kit for One Piece Cranks Y277
Bottom Bracket Bearing Kit for One Piece Cranks complete bottom bearing kit for one piece cranks silver the internal diameter of the bearing shell for the BB lug is: 51,5 mm (~2,03 inches)

€9.95*
Board Tracker Saddle black with black diamand seams Solo-BKBK
Board Tracker Saddle black with black diamand seams Finally in stock: Very cool saddle in board tracker style  High quality, Steel base with steel rail for the clamp or pantent post. Material: Artificial leather, steel, foam Size:  33,5 x 25.5 cm x 9 cm (~13,2 x 10 x 3,6 inches) with saddle clamp  Weight: ~ 1710 g (~3,77 pounds)  black with black seams

€89.95*
Outer Cable Housing Glittering Red Metallic 2,50 m 5 mm XT138
Outer Cable Housing Glittering Red Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

€6.99*