204 Kenda Kraze 20 x 4 1/4 Oldschool Tire

€49.95*

Product number: 522099

Community Bilder

Product information "204 Kenda Kraze 20 x 4 1/4 Oldschool Tire"

Tire Kenda Kraze 20 x 4 1/4

97-406

THE ultra fat custom tire with oldschool tread

The ultimate custom cruiser tire for maximum performance!

On 82 mm (~3,23 inches) rim as shown it is 98 mm (~ 3,86 inches) wide and  61 mm (~ 2,4 inches) high (above the rim).

This tire fits rims of widths 67 mm (~2,64 inces) to 102 mm (~4,02 inches) width!

If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.

But please check frame/fork for clearance!

Weight:  1430 g (~ 3,15 pounds)

30 TPI

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Tube 20 x 4.0 - 4 1/4 inch. AV Y957
Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm 

€13.95*
204 Kenda Krusade Tire 20 x 4 inch 528217
204 Kenda Krusade Extra Wide Tire 20 x 4  Diameter: 406 98 - 406 Ideal for the 20 inch fat e-bikes! This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim. Diameter over all on this rim: 580 mm (22,83 inches) 60 TPI 5-30 PSI  /   0,4 -2.1 bar  /  40 - 210 KPA Weight: ~ 990 g (~ 2,18258 pounds) If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast. This offer includes 1 piece only

€49.95*
Tire Liner for tires 20-29 inch , width 100 mm / ~3,94 inch CLSBND100x13x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 100 mm (~3,94 inches)  Thick: 1,3 mm (~0,051 inches) Length: 2350 mm (~ 92,52 inches) ~ 400 g (~ 0,88 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€18.95*
Rimstrip 20 inch. 80 mm Y741
Rimstrip 20 inch. width: 80 mm (~3,15 inches) for the 80 or 100 mm (~3,15 or 3,94 inches) wide rims

€3.95*
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*
UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG
UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*