UD black crankset LASCO 155 mm, square, 52 teeth

Classic Cycle

€39.95*

Prices incl. VAT plus shipping costs

Product number: UD1966

Product information "UD black crankset LASCO 155 mm, square, 52 teeth"

UD black crankset LASCO 155 mm, square, 52 teeth

black steel chainring with 52 teeth
black aluminum cranks
pedal arm length 155 mm for pedals with 9/16 thread
black aluminium chain guard
The crankset is suitable for a square axle!
With 2 pieces of axle - end bolts

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

MXUS KT LCD Display KT-LCD4 KT-LCD-KT-LCD4

MXUS KT LCD Display KT-LCD4 Technical specifications Type of display: LCD Display: Matrix Display Rated Voltage(DCV): 36/43/48 Support Modes: 0-5 Operating Temperature: -20 - 45℃ Weight: ~ 45gCuts out at 27 km/hLocked to 20 x 4 Zoll tire size and speed of 27 km/h Installation parameter Bus system: UART Dimensions 54 x 19 mm Handlebar diameter: Ø 22.2 mm Cable Length: ~ 370 mm Connector Type: Jullet 5 PIN, Male, green Display indications Current speed (km/h) Maximum speed (km/h) Average speed (km/h) Duration of single trip Distance of single trip Total Distance Reset single trip Duration Reset single trip Distance Capacity Error code display Walk Boost Backlight Tests & Certification IP code: IP X5 certifications: CE / EN 15194 / REACH / ROHS

€34.95*

Details

UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws UDX-BMX-STE

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets Original UDX BMX part from Urban Drivestyle Berlin

€19.95*

Mini Bell black UD40004

Mini Bell black diameter: ca. 35 mm

€2.49*

Tube 20 x 4.0 - 4 1/4 inch. AV Y957

Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm

€13.95*

Controller box, electronics box with seal for e-bike UD543

Controller box, electronics box with seal for E-Bike Uni Moke and Swing The controller box is made of robust plastic. In addition to attaching the controller to your e-bike, it also protects it. Dimensions: Outer dimension: ~ 21cm x 10.7cm x 3.4cm Inner dimensions: ~ 15.5 cm x 8.2 cm x 2.5 cm The box can be fitted to the frame of the Urban Dirvestyle Uni Moke and Swing bikes. It is screwed to the frame from below with the help of 4 screws. The cables are pulled upwards into the frame. The scope of delivery includes the controller box and the matching self-adhesive seal.

€19.95*