Point Single-Speed sprocket with 16 teeth and spacer ring set.

€19.95*

% €29.95* (33.39% saved)
Product number: UD02020001
Product information "Point Single-Speed sprocket with 16 teeth and spacer ring set."

Point Single-Speed sprocket with 16 teeth and spacer ring set.

  • Spacer rings: 6061-T6 aluminium
    • 4 x 3 mm
    • 1 x 5 mm
    • 2 x 10 mm
  • Sprocket: CrMo steel, heat treated (hardened and double annealed)
  • Teeth: 16
  • Weight approx. 82g

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Single Speed Converter Kit 18-16-14 Teeth 320071
Single Speed Converter kit Two precision-machined spacers sandwich a single 18t-16t-14t cog to replace your entire 8, 9 or 10 speed cassette. This item can help you to adjust the chainline 3 pinions /sprocket / cog steel: 18 Z, 16 Z, 14 T. 2 Spacer Alu: 20 mm (~0,79 inches), 13 mm (~0,51 inches)

€15.95*

Cutsomers also bought

Chain Adjuster for single speed, fixies BMX, ... 330419
Chain Adjuster for single speed, fixies, BMX, ... aluminium arm length: 68 mm (~2,68 inches) Weight: 110 gr. (~0,24 pounds) To assemble it a cantilever pivot is needed. Thread of the mounting screw: M10 x 1,0

€19.95*
Busch + Müller LED tail light Toplight Line Small BM-TOP-SMA
Busch + Müller LED tail light Toplight Line Small TOPLIGHT Line Small miniaturised LED tail light 12V DC with 2 PIN female Higo plug (red) cable length ~ 28 cm Strip light function LineTec fully automatic parking light function mounting distance 50mm lens colour: red universally applicable StVZO approved, with German test mark (K920)

€24.95*
%
UDX Hunter Rack luggage rack PM-1001247
The Hunter Rack luggage rack as a utility upgrade for your UDX! This robust and high-quality carrier is designed for up to 50 kg load and can even be equipped with a second seat cushion for occasional passenger rides around the block! Note: A frame adapter is available separately for the suspended Panza version.  Features of the Hunter Rack Material: Chromoly steel Colour: Black Dimensions: L 49cm x W 17cm x H 41cm (platform 41cm x 17cm) Weight: approx. 2 kg Includes: 1x Hunter Rack luggage carrier, mounting material: 4 x M10x16 screw, 4 x washers Version: X-Berg / XoppaPanzaX-Berg / Xoppa Original accessories from Urban Dirvestyle Berlin    

€59.95* €139.95* (57.16% saved)
Tip
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 124 mm Black matte with Stays extra wide 1520
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch.  Fender Stays 124 mm (~4,88 inches) width Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar. Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected. The fenders are therefore also suitable for many common 20-inch Fat E-bikes. 124 mm (~4,88 inches) wide, 20 inch., black matte complete plastic fender set for Fat Bikes or similar bike types Width: 124 mm (~4,88 inches) Hight: 35 mm (~1,38 inches) Diameter inside: ~ 550 mm (~21,65 inches) Diameter outside: ~ 610 mm (~24 inches) Rear length in circumference: ~ 960 mm (~37,8 inches) Front length in circumference: ~ 620 mm (~24,4 inches) Polycarbunate plastic black matte Weight: ~  1080 g. (~2,65 pounds)

€69.95*
204 Kenda Krusade Tire 20 x 4 inch 528217
204 Kenda Krusade Extra Wide Tire 20 x 4  Diameter: 406 98 - 406 Ideal for the 20 inch fat e-bikes! This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim. Diameter over all on this rim: 580 mm (22,83 inches) 60 TPI 5-30 PSI  /   0,4 -2.1 bar  /  40 - 210 KPA Weight: ~ 990 g (~ 2,18258 pounds) If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast. This offer includes 1 piece only

€49.95*
Tube 20 inch. with Auto / Car Valve Y745
Tube 20 inch. with Auto / Car Valve for tires: 47 -406, 50- 406, 57-406 20 x 1.75, 20 x 1.90, 20 x 2.125

€2.99*