Magura QM12 disc brake adapter, IS to PM

Disc brake adapter from Magura QM 5, IS to PM. Adapter enables the use of 203 mm brake discs on forks with IS 6" mount. The adapter is screwed onto the IS mount of the fork and allows the use of a postmount brake caliper. Front brake disc: 203 mm Fork mount: IS 6 incl. mounting bolts black General information: POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters. IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.

204 Vee Rubber E-Speedster Extra Wide Tire 20 x 4  The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air 102 - 406 26 TPI Edurance Compound E-Bike 50, ECE - R75 8-20 PSI (0.6 - 1,4 bar) For custom and chopper bikes like the Schwinn New Stingray. This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim. Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure. Weight: ~ 1,2 kg (~2,6 pounds) If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast. This offer includes 1 piece only

Adapter for Disc Brake black 160 mm, rear 180 mm, front IS 2000

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

Reflective cycling jacket "Fahrfreude" with hood, S The reflective cycling jacket "Fahrfreude" with hood is the perfect companion, not only in the cold season! With this cycling jacket, you are always clearly visible in road traffic thanks to its high reflectivity. It also protects you from wind and weather. The "Fahrfreude" cycling jacket with the large Fahrfreude lettering on the back and on the front of the right chest is made entirely of silver reflective material. During the day, the jacket appears to be neutral grey, but at night it shines brightly in road traffic. The high-quality zip and well-cut hood provide the necessary weather protection. Details: Size: S Brand: Clique Material: 100% polyester Washable: up to 40 °C Unisex "Fahrfreude" = Driving pleasure

Magura QM41 disc brake adapter, IS2000 Adapter allows the use of 180 mm brake discs on the rear triangle with IS2000 mount. The adapter is screwed to the IS mount of the rear triangle and allows the use of a postmount brake caliper. Rear brake disc: 160 to 180 mm rear wheel mount: IS2000 incl. mounting bolts black General information: POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters. IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.