HIGO / Julet Y-cable 17.5 cm for Ebike, 2 PIN red to 2 PIN red and USB micro B

Classic Cycle

€15.95*

Prices incl. VAT plus shipping costs

Product number: HIG-Y-USB

Product information "HIGO / Julet Y-cable 17.5 cm for Ebike, 2 PIN red to 2 PIN red and USB micro B"

Y-cable / splitter cable for Ebike

Technical data:

Connector: HIGO / Julet red 2-PIN male, red 2-PIN female, USB mircro B.
Water resistance: IP65
Cable length: 17,5 cm
Connector: red male, red female, USB micro B male
Outer material: ABS plastic

General information:

HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.

A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.

Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

Motor extension cable Julet 9 PIN, 42 cm / 16,5 inches HIG-MOT-EXT-042

Extension cable for ebike motors Technical data: Transmission of data and power between motor and cotroller Compatible with Bafang hub motors Waterproof Julet plug 9 PIN Cable length: ~ 33 cm ( 13 inches), 42 cm (16,5 inches) incl. plug General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€17.95*

HIGO / Julet extension cable 30 cm for ebike, 5 PIN female to male, green HIG-LIG-030-G

Extension cable for Ebike Technical data: Connector: 5-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 30 cm / 11,81 inches Plug connection: green Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€8.95*

HIGO / Julet adapter cable 11 cm for ebike, 2 PIN male to male, red HIG-ADA-MAL_011

Adapter cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (2x male) Water resistance: IP65 Cable length: 11 cm / 4,3 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€8.95*

Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches CAB-TRE-1T4-MK-118

Wiring harness 1T4, Bafang compatible Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

Motor extension cable Julet 9 PIN, 30 cm / 11,8 inches HIG-MOT-EXT-030

Extension cable for ebike motors Technical data: Transmission of data and power between motor and cotroller Compatible with Bafang hub motors Waterproof Julet plug 9 PIN Cable length: 21.5 cm ( 8,46 inches), 30 cm (11,8 inches) incl. plug General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€16.95*

Bafang wiring harness 1T4, waterproof, 70 cm / 27,55 inches CAB-TRE-1T4-MK-070

Bafang wiring harness 1T4 Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€22.95*