Front headlight for motorbike or e-bike 6 1/2 inch glossy black

Classic Cycle

€69.95*

Prices incl. VAT plus shipping costs

Product number: 223-078-GS

Product information "Front headlight for motorbike or e-bike 6 1/2 inch glossy black"

Large headlight for motorbike or e-bike

UNI MK headlight

Details:

Asymmetrical 6 1/2 inch headlight
Housing and lamp ring in glossy black
Clear glass plastic lens
H4 insert with parking light (without H4 bulb and its socket)
M8 mounting holes on the side
The parking light is connected via two open cable ends.
This headlight was also fitted to the UNI MK bikes at Urban Drivestyle!

Dimensions :

Glass diameter: ~ 176 mm (6 1/2 inch)
Outer diameter: ~ 190 mm
Total depth: ~ 150 mm
Depth from mounting: ~ 90 mm
Diameter between the fixing holes: ~ 170 mm
Cable length: ~ 10 cm
Weight: ~ 740 g

Approval:

With E-approval.

The headlight has an E4 approval mark and does not require any further documents.

It can therefore be installed without further ado in accordance with the installation regulations.

Please order accessories separately:

LED lamp Art. No.: LED-BUL-12V or UD3597
Conversion to e-bike typical HIGO connections: HIG-POL-2ADR-FEM or HIG-POL-2ADR-MAL

Note:

Many customers use the headlight in combination with a 12V starter battery for scooters or motorbikes.

E4 Zertifikat

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

HIGO / Julet extension cable 30 cm for ebike, 2 PIN female HIG-POL-2ADR-FEM

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / 1x Julet female, 1x open end Water resistance: IP65 Cable length: ~ 30 cm Plug connection: 1x red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€6.95*

HIGO / Julet extension cable 30 cm for ebike, 2 PIN male HIG-POL-2ADR-MAL

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / 1x Julet male, 1x open end Water resistance: IP65 Cable length: ~ 30 cm Plug connection: 1x red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€6.95*

UD Lamp holder for front headlights, white LAM-HOL-WHT

Lamp holder for front headlights, white The holders are made of chromoly steel and are available in black and white. CHARACTERISTICS OF THE LAMP HOLDERS Material: Chromoly steel Colour: White Compatibility: UNI MK, Swing & Bobber V3 and above Includes: 2x holder Original lamp holder for the 7 inch front headlight from Urban Drivestyle!

€14.95*

H7 LED headlight bulb 12V for e-bikes and motorbikes UD3597

H4 LED headlight bulb 12V for e-bikes and motorbikes You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride! Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine! Properties of the H7 LED Standard H7 base Power: 7W Voltage: 12V Light colour: 6000K Individual under E-bikes Super white light Extra long life Low power consumption Original accessories from Urban Drivestyle Berlin!

€14.95*

Lamp holder for front headlights, black LAM-HOL-BLA

Lamp holder for front headlights, black The holders are made of chromoly steel and are available in black and white. CHARACTERISTICS OF THE LAMP HOLDERS Material: Chromoly steel Colour: Black Compatibility: UNI MK, Swing & Bobber V3 and above Includes: 2x holder Original lamp holder for the 7 inch front headlight from Urban Drivestyle!

€14.95*

H7 LED headlight bulb 12V for e-bikes and motorbikes LED-BUL-12V

H7 LED headlight bulb 12V for e-bikes and motorbikes You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride! Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine! Properties of the H7 LED Standard H7 base Power: 7W Voltage: 12V Light colour: 6000K Individual under E-bikes Super white light Extra long life Low power consumption Original accessories from Urban Drivestyle Berlin!

€14.95*

Customers also bought

Lamp holder for front headlights, black LAM-HOL-BLA

€14.95*

Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches CAB-TRE-1T4-MK-118

Wiring harness 1T4, Bafang compatible Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

HIGO / Julet extension cable 30 cm for ebike, 5 PIN female to male, green HIG-LIG-030-G

Extension cable for Ebike Technical data: Connector: 5-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 30 cm / 11,81 inches Plug connection: green Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€8.95*

HIGO / Julet extension cable 5,5 cm for ebike, 2 PIN female to male, red HIG-LIG-005

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 5,5 cm / 2,16 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€7.95*

HIGO / Julet adapter cable 11 cm for ebike, 2 PIN male to male, red HIG-ADA-MAL_011

Adapter cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (2x male) Water resistance: IP65 Cable length: 11 cm / 4,3 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€8.95*

Motor extension cable Julet 9 PIN, 30 cm / 11,8 inches HIG-MOT-EXT-030

Extension cable for ebike motors Technical data: Transmission of data and power between motor and cotroller Compatible with Bafang hub motors Waterproof Julet plug 9 PIN Cable length: 21.5 cm ( 8,46 inches), 30 cm (11,8 inches) incl. plug General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€16.95*