Alu Front light holder / clip Outsider
Of course, this high-quality lamp holder, from the Outsider series, can also be used for other frames and lamp models.
Diameter inside: ~ 3.4 cm (~1,34 inches)
Diameter outside: ~ 4,15 cm (~1,63 inches)
Length: ~10,3 cm (~4,05 inches)
Material: aluminum
Color: black
with Allen screw
1 piece included in delivery
204 Extra Wide Tire 20 x 4 red
Diameter: 406
98 - 406
Ideal for the 20 inch fat e-bikes!
This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim.
Diameter over all on this rim: 580 mm (22,83 inches)
33 TPI
5-30 PSI / 0,4 -2.1 bar / 40 - 210 KPA
Weight: ~ 1260 g (~ 2,7 pounds)
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
This offer includes 1 piece only
204 Rocker Extra Wide Tire 20 x 4 green
Diameter: 406
98 - 406
Ideal for the 20 inch fat e-bikes!
This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim.
Diameter over all on this rim: 580 mm (22,83 inches)
33 TPI
5-30 PSI / 0,4 -2.1 bar / 40 - 210 KPA
Weight: ~ 1260 g (~ 2,7 pounds)
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
This offer includes 1 piece only
Bottle cage adapter 22,2 - 25,4 mm (~0,87 - 1 inch), aluminium
for assembling of e.g. a bottle cage at the handlebar, seat post, .....
aluminium
turnable 90°
for tube diameter 22,2 - 25,4 mm (~0,87 - 1 inch)
incl. stainless steel fixing screws
usable for all current bottle cages
black
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / 1x Julet male, 1x open end
Water resistance: IP65
Cable length: ~ 30 cm
Plug connection: 1x red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.