Rear lamp for dynamo to assemble on fender

Classic Cycle

€5.95*

Prices incl. VAT plus shipping costs

Product number: RSF169

Product information "Rear lamp for dynamo to assemble on fender"

Rear lamp for dynamo to assemble on fender

~~~~~~ K 119
For Dynamo
Material:plastic red and black
Length: ~ 9,6 cm (w/o connection)
width: ~ 4 cm (w/o connection)
with + - connection

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Small Front Light Big Bullet Chrome 5183

Small Front Light Big Bullet CP 6V 3 W 46 mm (~1,81 inches) chrome-plated clear lens good quality for dynamo

€16.95*

Front light square 73 x 73 mm RSF219

6V 2,4 W Halogen - Xenon with cable with Reflector for dynamo use ~~~~~~ K 145

€7.95*

Valve Caps Dice, red Y834

Valve Caps Dice, red 1 pair, fits on all standard auto / car / motorcycle valves The ultimate custom hot rod look for your bike!

€4.95* €5.95* (16.81% saved)

Head Set Adapter 1 - 1 1/8 inch. 390627

Head Set Adapter kit 1 - 1 1/8 inch. 2 pieces, alloy to install into head of the frame to reduce head tube for using head set with smaller diameter to reduce 1 1/8" to 1" outer diameter: 34,0 mm (~1,34 inches) inner diameter: 30,2 mm (~1,19 inches)

€4.95*

Grips white Rubber Y856

Rubber Grips white 117 mm (~4,61 inches) long for 22 mm (~0,87 inches) handlebars Like they were in the 60s/70s! The coolest grips You can put on Your Krate, Stingray or other oldschool stuff. one pair

€5.95*

Tire Liner for tires 20-29 inch , width 100 mm / ~3,94 inch CLSBND100x13x235

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 100 mm (~3,94 inches) Thick: 1,3 mm (~0,051 inches) Length: 2350 mm (~ 92,52 inches) ~ 400 g (~ 0,88 lbs) Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€18.95*