Streetking Whitewall Balloon Tire 20 x 2.125

€22.95*

Product number: Y249

Community Bilder

Product information "Streetking Whitewall Balloon Tire 20 x 2.125"

Streetking Whitewall Balloon Tire

20 x 2.125

nostalgia whitewall tire for the ultimate old school look!

This tire fits on all 20" Classic Cycle rims up to 65 mm width!

But please check frame/fork for clearance!

If you assemble the tire on wide rims not to put more pressure than 16 PSI

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Tube 20 inch. with Auto / Car Valve Y745
Tube 20 inch. with Auto / Car Valve for tires: 47 -406, 50- 406, 57-406 20 x 1.75, 20 x 1.90, 20 x 2.125

€2.99*
Tip
Streetking Whitewall Balloon Tire 26 x 2.125 57 x 559 Y250
Streetking Whitewall Balloon Tire 26 x 2.125 57 - 559 nostalgia whitewall tire for the ultimate old school look! width of inflated tire: 55 mm (~2,16 inches) This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95 inches) width! But please check frame/fork for clearance! If you assemble the tire on wide rims not to put more pressure than 16 PS. It could blast.

€29.95*
Rimstrip 20 inch. 30 mm Y748
Rimstrip 20 inch. width: 30 mm (~1,18 inches) Will fit on tire and rims 47-406, 50-406, 57-406 20x 1.7, 20 x 1.90, 20 x 2.125 or nearby

€0.94*
Sting-Ray Handlebar Y670
Sting-Ray Handlebar for the Sting-Ray or similar cult bikes of the 60s and 70s chrome-plated steel dimensions: about 660 x 350 mm (~25,98 x 13,78 inches) for 22 mm (~0,87 inches) stems

€29.95*
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*