For mounting on the handlebar. We recommend left side below.
The throttle can be installed on the Greaser or the Outsider.It is connected to the controller (control unit) via the existing cables. The drive assistance from the engine can be controlled manually by the thumb throttle.
Fitts Greaser and Outsider!
NEW Classic Cycle Dual Springer Vintage Bicycle Fork for Fat Bikes
with Disc Brake mount
with 1 1/8 inch steerer
Abraham Linkage Monark Fork
The most beautyful springer ever produced now for 100 mm (~3,94 inches) rims suits Sand, Snow or Fat Bikes up to 26 x 4.5 Tires
up to 26 inch., adjustable springs
black with chrome-plated springs
1 1/8 inch steerer = 28,6 mm
total steerer lengh: 239 mm (~9,41 inches)
without thread for ahead headset
Width between Fork legs: 140 mm (~5,51 inches)
Axle mount width: 135 mm (~5,31 inches)
Distance between fork crown and axle dropout: 430 mm (~16,93 inches)
Weight: 3,27 kg (~7,21 pounds)
with mount for Disc brake (160 mm (~6,30 inches) max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 100 mm (~3,94 inches)
Thick: 1,3 mm (~0,051 inches)
Length: 2350 mm (~ 92,52 inches)
~ 400 g (~ 0,88 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.