Holy Roller 26 x 2.2 black

€34.95*

Product number: HR2622
Product information "Holy Roller 26 x 2.2 black"

Holy Roller  26 x 2.2  Black (52-559)

The ultra fat custom tire!!!

With yellow Maxxis inscription.

Fits well to the classic Berm Master 24 x 3.0. The ultimate custom cruiser and lowrider tire for maximum show performance! About 52 mm (~2,04 inches) wide on smaller rims.

This tire fits on all 26" Classic Cycle rims up to 67 mm (~2,64 inches) width! But please check frame/fork for clearance!

If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Double Crown Fork 69 black matte 3858
Double Crown Fork 69 cm (~27,16 inches) black matte noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer If you have a frame which needs a 1 1/8 fork steerer you may need item 390627 and 968. alloy triple trees and black steel fork tubes for disc brakes the ultimate fork for custom chopper and cruiser freaks! Steerer length: 300 mm (~11,81 inches) fork tube inner width: about 94 mm (~3,70 inches) fork tube length: about 690 mm (~27,16 inches) Width between dropouts: 110 mm (~4,33 inches) Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches) Inner Diameter of fork legs tubes: 35 mm (~1,38 inches) Steerer length can be adjusted with the variable position of the bridges.

€169.95*
Cable protection hose with velcro UD-666
Cable protection hose with velcro 0,99 € per 10 cm (~3,94 inches) how to order:100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 inches) = 10 x 0,99 €, when 150 cm needed (~59,05 inches) = 15 x 10 cm (~3,94 inches)  = 15 x 0,99 € 

€0.99*
Stem 4 Screws with 22,2 shaft and for 22,2 handlebars 1710
Stem with 22,2 mm (~0,87 inches) shaft black aluminium, with CP steel stem shaft 4 Screws handlebar acceptance 22,2 mm (~0,87 inches) 65 mm (~2,56 inches) max. height / 35 mm (~1,38 inches) nosing

€19.95*
Tannus Armour puncture protection, 20 x 4.0 - 4.8 519135
The Tannus Armour is an effective 3-in-1 puncture protection system! By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims. Puncture Protection for: Tire - 100 -120 x 406 / 20" x 4.0 - 4.8 *Tube - 90 - 120 x 406 / 20 x 3.0- 4.0 Rim - 65 - 140 x 406 The all-round protection against punctures, cuts and pinching.  up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area  free tire and tread selection very light and reusable support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction reduces the risk of snake bites (e.g. by a strong impact) patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping With flattened tube you can continue riding at reduced speed for a short period on flat paths. easy mounting anti-pinch protection for tube mounting universal sizes for several widths If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors. recyclable weight: 360 g scope of delivery: 1 piece *Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 3.0 - 3.75 is recommended. From our list the Kenda Kraze 20 x 4.0 won't fit. It is not bollooning enaugh.

€52.95*