Extra wide Front Hub with disc brake mount
for example 100 mm (~3,94 inches) rims and extra wide forks
144 holes
200 mm (~7.87 inches) axle
mounting size: 150 mm (~5,90 inches)
Pitch circle inside 65 mm (~2,56 inches)
Bolt circle diameter outside 75 mm (~2,95 inches)
spacing between flanges: 98 mm (~3,86 inches)
Weight: 840 gr. (~1,85 pounds)
Disc brake mounts
Suitable for spokes up to 2.3 mm / 0,09 inch in diameter.
Disk Brake mount for rear end
easy fits with many frames
according to ISO 2000 standard
S235 steel, black
CNC mashined
Dimensionens: max length 108 mm (~4,25 inches)
Thickness at axle mount: 3 mm (~0,12 inches)
Thickness at disk brake mount: 10 mm (~0,39 inches)
American-to-Euro Conversion kit
These beautifully machined aluminum bushings fit into the shell of a one-piece-crank bottom bracket, and are threaded to accept a:
standard threaded bottom bracket
normal 68 mm (~2,68 inches) width.
3 long CrMo bolts connect the two bushings to one another for a secure mounting.
NEW Classic Cycle Dual Springer Vintage Bicycle Fork for Fat Bikes
with Disc Brake mount
with 1 1/8 inch steerer
Abraham Linkage Monark Fork
The most beautyful springer ever produced now for 100 mm (~3,94 inches) rims suits Sand, Snow or Fat Bikes up to 26 x 4.5 Tires
up to 26 inch., adjustable springs
black with chrome-plated springs
1 1/8 inch steerer = 28,6 mm
total steerer lengh: 239 mm (~9,41 inches)
without thread for ahead headset
Width between Fork legs: 140 mm (~5,51 inches)
Axle mount width: 135 mm (~5,31 inches)
Distance between fork crown and axle dropout: 430 mm (~16,93 inches)
Weight: 3,27 kg (~7,21 pounds)
with mount for Disc brake (160 mm (~6,30 inches) max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark
Street Hog III Monster Tire 24 x 4 1/4 pure black
for custom and chopper bikes
Inflate to 30 P.S.I.
Overall diameter on a 100 mm (~3,94 inches) rim: ~ 655 mm (~25,79 inches)
Overall diameter on a 80 mm (~3,15 inches) rim: ~ 665 mm (~25,79 inches)
On a 100 mm (~3,94 inches) rim the tire is about 103 mm (~4,05 inches) wide.
On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,63 inches) wide.
Overall diameter, depending on rim width and air pressure about: 66 cm (~25,98 inches) + / - 2 cm (~0,79 inches).
ETRTO:108 - 507
Weight: 1,95 kg ( ~4,30 pounds)
This tire fits on all 24" Classic Cycle rims wider than 50 mm till 132 mm rims. But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.