Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches

Classic Cycle

€24.95*

Prices incl. VAT plus shipping costs

Product number: CAB-TRE-1T4-MK-118

Product information "Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches"

Wiring harness 1T4, Bafang compatible

Technical data:

Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Compatible with Bafang hub motors
Waterproof plugs / connectors
Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches
Connections:
- 1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
- 1x male 5-PIN Jullet connector green for display
- 2x female 3-PIN Jullet connector yellow for shift / brake sensor
- 1x male 8-PIN Jullet connector black for controller

General information:

HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.

A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.

Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Wiring harness 1T5, waterproof, 56 cm / 22,05 inches CAB-TRE-1T5-056

Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*

New

UD Seat latch plastic clip SEA-LOC-ANG

Seat latch plastic clip This elongated plastic part holds the seat of your UNI MK closed. It is attached to a frame strut with one/two M4 bolts (depending on the year of manufacture of the bike) so that the seat can lock into place. It is compatible with all UNI MK versions from V1 onwards and all mounting parts are included. Material: Moulded plastic Colour: Black Dimensions: 10cm x 1cm x 2cm (L x W x H) Includes: Plastic seat fastener, mounting parts (3x M4 bolts, nut). Original spare part from Urban Drivestyle Berlin!

€14.95*

Reducer / Spacer 27,2 mm to 31,6 mm UD9316

Reducer / Spacer 27,2 mm (~1,07 inch) to 31,6 mm (~1,244 inches) 80 mm (~3,15 inches) long one piece alu

€5.95*

Alu rim 20 inch 67 mm black matte JSR2067bk

Aluminium Alloy Rim 20 inch., 67 mm (~2,64 inches) wide ETRTO: 406 single wall 67 Wide: 67 mm (~2,64 inches) inner size: 60 mm (~2,36 inches) Holes: 36 colour: black matte Rim diameter for calculating the spoke length: 386 mm (~15,20 inches) Weight: 660 g (~1,45 pounds)

€36.95*

Details

UD rear derailleur Shimano Tourney RD-FT35-A-SS 6/7-speed RD-TY300-SGS

RD-FT35-A-SS The Shimano Tourney FT35 7-speed rear derailleur has a short cage and is compatible with 6/7-speed systems. Ideal for older bikes or models with entry-level transmission systems, the Shimano Tourney FT35 7-speed rear derailleur offers reliable shifting performance in difficult terrain and riding conditions. FEATURES Less maintenance by suitable feature Double tension rear derailleur Wheel-type cable guide pulley for strong against cable bending Enough lower profile, Enough ground clearance to avoid rear derailleur to hit obstacles Upgraded appearance (RD-FT55) Interchangeable with SHIMANO MTB 7/6-speed system Front single use only Compatible with 11T top rear sprocket (total capacity 17T)

€11.99*