MXUS KT LCD Display KT-LCD4

Classic Cycle

€34.95*

Prices incl. VAT plus shipping costs

Product number: KT-LCD-KT-LCD4

Product information "MXUS KT LCD Display KT-LCD4"

MXUS KT LCD Display KT-LCD4

Technical specifications

Type of display: LCD
Display: Matrix Display
Rated Voltage(DCV): 36/43/48
Support Modes: 0-5
Operating Temperature: -20 - 45℃
Weight: ~ 45g
Cuts out at 27 km/h

Installation parameter

Bus system: UART
Dimensions 54 x 19 mm
Handlebar diameter: Ø 22.2 mm
Cable Length: ~ 370 mm
Connector Type: Jullet 5 PIN, Male, green

Display indications

Current speed (km/h)
Maximum speed (km/h)
Average speed (km/h)
Duration of single trip
Distance of single trip
Total Distance
Reset single trip Duration
Reset single trip Distance
Capacity
Error code display
Walk Boost
Backlight

Tests & Certification

IP code: IP X5
certifications: CE / EN 15194 / REACH / ROHS

Manual KT-LCD4 Display

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

UD black crankset LASCO 155 mm, square, 52 teeth UD1966

UD black crankset LASCO 155 mm, square, 52 teeth black steel chainring with 52 teethblack aluminum crankspedal arm length 155 mm for pedals with 9/16 threadblack aluminium chain guardThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts

€39.95*

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws UDX-BMX-STE

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets Original UDX BMX part from Urban Drivestyle Berlin

€19.95*

UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*

Mini Bell black UD40004

Mini Bell black diameter: ca. 35 mm

€2.49*

Wiring harness 1T5, waterproof, 56 cm / 22,05 inches CAB-TRE-1T5-056

Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

UDX Hunter Rack luggage rack PM-1001247

The Hunter Rack luggage rack as a utility upgrade for your UDX! This robust and high-quality carrier is designed for up to 50 kg load and can even be equipped with a second seat cushion for occasional passenger rides around the block! Note: A frame adapter is available separately for the suspended Panza version. Features of the Hunter Rack Material: Chromoly steel Colour: Black Dimensions: L 49cm x W 17cm x H 41cm (platform 41cm x 17cm) Weight: approx. 2 kg Includes: 1x Hunter Rack luggage carrier, mounting material: 4 x M10x16 screw, 4 x washers Version: X-Berg / XoppaPanzaX-Berg / Xoppa Original accessories from Urban Dirvestyle Berlin

€59.95* €139.95* (57.16% saved)