48V Charger for Li-ion battery DC Plug, 110 - 240V 2.0A

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets Original UDX BMX part from Urban Drivestyle Berlin

Pedals made of plastic with reflectors Colour up your bike! Details: Thread: 9/16 inch Design: Platform pedal Material: Sturdy pedal body made of durable nylon Axle: Boron steel Colour: orange Weight: ~ 415 g Platform dimensions: 97 x 95 x 27 mm With StVZO approved reflectors 1 pair of pedals Original accessories for Bikes from Urban Drivestyle Berlin! Note: In our shop you will also find the matching coloured grips!

Controller box, electronics box with seal for E-Bike Uni Moke and Swing The controller box is made of robust plastic. In addition to attaching the controller to your e-bike, it also protects it. Dimensions: Outer dimension: ~ 21cm x 10.7cm x 3.4cm Inner dimensions: ~ 15.5 cm x 8.2 cm x 2.5 cm The box can be fitted to the frame of the Urban Dirvestyle Uni Moke and Swing bikes. It is screwed to the frame from below with the help of 4 screws. The cables are pulled upwards into the frame. The scope of delivery includes the controller box and the matching self-adhesive seal.

Pre-assembled Bafang wiring harness 1T4 with 2PIN extension cable in cable protection hose. Technical data of Bafang wiring harness 1T4: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller Technical data of Extension cable for Ebike: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic Technical data cable protection hose: Keeps cables tidy and protected! Diameter: ~ 20 mm Length: ~ 850 mm Fabric hose with practical Velcro fastener over the entire length General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

SHIMANO Right Shift Lever 7-speed SL-M315-7R SHIMANO - RAPIDFIRE PLUS - Right Shift Lever - Clamp Band - 7-speed For reliable mountain bike shifting, SHIMANO's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke.                 FEATURES Light shifting operation, wider compatibility, and suitable for internal cable routing Slim main lever body RAPIDFIRE PLUS Streamlined cockpit experience Gear display positioned below the handlebar Numbered gear display indicates gear position at a glance OPTICAL GEAR DISPLAY       FEATURES Light shifting operation, wider compatibility, and suitable for internal cable routing Slim main lever body RAPIDFIRE PLUS Streamlined cockpit experience Gear display positioned below the handlebar Numbered gear display indicates gear position at a glance OPTICAL GEAR DISPLAY        

Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.