204 MXUS Motor 500 W rear wheel complete 20 x 4 - 80 mm wide

Classic Cycle

€289.95*

Prices incl. VAT plus shipping costs

Product number: UD-1

Product information "204 MXUS Motor 500 W rear wheel complete 20 x 4 - 80 mm wide"

204 MXUS Motor 500W Rear wheel complete with tire and tube 20 x 4 - 80 mm wide

20 inch Fat Bike rear wheel
black matte anodized alu rim,
36 Spokes 2,6 mm black
disc brake mount 44 mm 6 holes
over locknut dimension: 190 mm
rim width: 80 mm
ready assembled
with rim tape and tube
with Innova allround tire 20 x 4
weight: ~ 7450 g

This Items was produced for Urban Drive Style UDX Model

Specification of the Motor Hub

Model number	GDR-15FAT-1
Position	Rear
Construction	Gear
Rated voltage(V)	48
Rated Power(W)	500
Weight(kg)	4.15
Reduction Ratio	1:5
Wheel Diameter(inch)	20
Rated speed(km/h)	25-40
Magnet Poles(2P)	10
Dropout(mm)	190
Brake Type	V/Disk brake
Operating Temperature ©	-20 - +45
Efficiency(%)	≧78%
Color	Black
Cabling Route	Shaft center LEFT
Noise Grade(dB)	≤55
IP Grade	IP54
Salt Spary Test Standard(h)	24/96

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches CAB-TRE-1T4-MK-118

Wiring harness 1T4, Bafang compatible Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

Reducer / Spacer 27,2 mm to 31,6 mm UD9316

Reducer / Spacer 27,2 mm (~1,07 inch) to 31,6 mm (~1,244 inches) 80 mm (~3,15 inches) long one piece alu

€5.95*

Wiring harness 1T5, waterproof, 56 cm / 22,05 inches CAB-TRE-1T5-056

Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*

UD Seat latch plastic clip SEA-LOC-HIN

Seat latch plastic clip This elongated plastic part holds the seat of your UNI MK closed. It is attached to a frame strut with one/two M4 bolts (depending on the year of manufacture of the bike) so that the seat can lock into place. It is compatible with all UNI MK versions from V1 onwards and all mounting parts are included. Material: Moulded plastic Colour: Black Dimensions: 10cm x 1cm x 2cm (L x W x H) Includes: Plastic seat fastener, mounting parts (3x M4 bolts, nut). Original spare part from Urban Drivestyle Berlin!

€19.95*

Trelock LS780 Airflow 100 LED front light for ebikes TRE-780-AIR

Trelock LS780 Airflow 100 LED front light for ebikes The Trelock LS780 Airflow LED front light for your UNI bike! StVO-compliant, slim design and powerful light output! When it comes to front lights, TRELOCK focuses on higher performance with a slim, harmonious design: Thanks to double-lens technology, the Airflow 100 front light, with a compact 45mm housing, achieves a full 100 lux illuminance. Two windows in the housing increase lateral visibility, while a small, removable reflector ensures a slimmer silhouette. The AIRFLOW can be flexibly aligned with the ZL 990 double-axis bracket. The high-quality choice of materials in combination with the reduced design of the AIRFLOW is particularly suited to the demanding cyclist. The Airflow 100 is StVZO-certified. Compatible with all UNI bikes with Higo 2-pin plug. Features of the Trelock lamp Manufacturer: Trelock Material: Aluminium & plastic Colour: black Voltage: 6-12V Light intensity: 100 Lux Visibility: 120m / 6500m Includes: Front lamp, cable with 2-pin female higo round plug red (not fitted), adaptable lamp holder + attachments. StVO-compliant Made in Germany Original accessories from Urban Drivestyle Berlin!

€62.95* €169.90* (62.95% saved)