SHIMANO Right Shift Lever 7-speed
SL-M315-7R
SHIMANO - RAPIDFIRE PLUS - Right Shift Lever - Clamp Band - 7-speed
For reliable mountain bike shifting, SHIMANO's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke.
FEATURES
Light shifting operation, wider compatibility, and suitable for internal cable routing
Slim main lever body
RAPIDFIRE PLUS
Streamlined cockpit experience
Gear display positioned below the handlebar
Numbered gear display indicates gear position at a glance
OPTICAL GEAR DISPLAY
FEATURES
Light shifting operation, wider compatibility, and suitable for internal cable routing
Slim main lever body
RAPIDFIRE PLUS
Streamlined cockpit experience
Gear display positioned below the handlebar
Numbered gear display indicates gear position at a glance
OPTICAL GEAR DISPLAY
Innovative and beautiful mini bell made of copper
very loud and long lasting sound (100dB)
body made of copper
diameter 30 mm / 1,18 inch
innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter
weight 48 g / 0,11 pounds
incl. rubber inlay
colour black
For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.
Charging socket XLR D 3-pole, female with sealing cap / sealing housing
Info about the XLR D 3-pole female charging connector:
Traditional chassis connector with large solder pads for easy soldering.
3-pole female chassis connector, D-shape
Solder terminals
Black plastic housing
Gold plated contacts
Info about the Neurik SCDX sealing cap / sealing housing:
With the SCDX sealing cap, D-shape chassis connectors are sealed against water, dust and dirt according to IP42 when unmated.
IP42 protection against dust and splash water
Suitable for all D-shape flush-type connectors
Snap lock
Labelling area
The dimensions of the sealing cap can be found in the data sheet below.
Scope of delivery:
1x XLR D receptacle
1x sealing cap
E-Mission Command Tire 20 x4 black whitewall
Diameter: 406
ETRTO 102 - 406
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,,22 inches) rim the tire is about 97 mm (~ 3,82 inches) wide and it will 90 mm (~ 3,54 inches) protrude over the rim, diameter over all ~ 59 cm (~ 23,23 inches)
26 TPI
Endurance Compound
E-Bike ready 50, ECE-R75
8-20 PSI (0.6 - 1.4 bar)
Weight: ~ 1,6 kg (~3,53 pounds)
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
This offer includes 1 tire.
204 E-Speedster Whitewall Extra Wide Tire 20 x 4
The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air
102 - 406
26 TPI
Edurance Compound
E-Bike 50, ECE - R75
8-20 PSI (0.6 - 1,4 bar)
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim.
Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure.
Weight: ~ 1,4 kg (~2,6 pounds)
If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.
This offer includes 1 piece only
Wiring harness 1T4, Bafang compatible
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Compatible with Bafang hub motors
Waterproof plugs / connectors
Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches
Connections:
1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
1x male 5-PIN Jullet connector green for display
2x female 3-PIN Jullet connector yellow for shift / brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
€24.95*
This website uses cookies to ensure the best experience possible. More information...