Busch + Müller rear light µ E for Ebike

€29.95*

% €44.95* (33.37% saved)

Product number: BM-REA-MUE-D

Product information "Busch + Müller rear light µ E for Ebike"

Busch + Müller rear light µ E for Ebike

Small, stylish and bright - The smallest, road-legal rear light. µ [my:], pronounced mü. Minimalist and in a high-quality aluminium housing from the renowned light manufacturer Busch + Müller.

The µ is small, efficient and offers very good all-round visibility despite its small size. It is based on 12V voltage and impresses with its filigree, simple design. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included.

Features of the rear light

Material: Anodised aluminium housing, plastic
Power: < 2W
Voltage: 5-15 V
Colour: black
Diameter (luminaire): 19mm Ø
Length: 20mm
With German E-mark (not approved for vehicles subject to registration plate requirements)
Includes: LED tail light & attachments
Please refer to the manual below for further technical details.

Bedienungsanleitung / Manual

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Philips LED E-Bike front lamp, silver, handlebar mount EF60L55BAH

PHILIPS LED front lamp for E-bike SafeRide® E-bike driven 60 The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight. It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes. The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled. The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level. Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules: All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers. This is only possible through the use of an all-aluminium housing. In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO. Details: Powered by automotive LUXEON® Altilon LED Light source: 2x 60 LUX LEDs 160 lumen in the beam Crystal white light (5500K) Extra wide illumination Up to 50 metres homogeneous road illumination Foreground illumination Glare free beam (StVZO in Germany) Fulfills international motorcycle standard ECE R113 Class C StVZO certification Operates on 5 - 48V DC, 5W Finish Waterproof aluminium housing in silver (brushed aluminium) Handlebar bracket interface For further data, please see the datasheet below.

€14.95* €44.95* (66.74% saved)

Philips LED E-Bike front lamp, black with reflector, fork mount EF60L55BBL

PHILIPS LED front lamp for E-bike SafeRide® E-bike driven 60 The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight. It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes. The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled. The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level. Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules: All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers. This is only possible through the use of an all-aluminium housing. In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO. Details: Powered by automotive LUXEON® Altilon LED Light source: 2x 60 LUX LEDs 160 lumen in the beam Crystal white light (5500K) Extra wide illumination Up to 50 metres homogeneous road illumination Foreground illumination Glare free beam (StVZO in Germany) Fulfills international motorcycle standard ECE R113 Class C StVZO certification Operates on 5 - 48V DC, 5W Finish Waterproof aluminium housing in black Retroreflector integrated into holder with K-approval Fork mounting interface For further data, please see the datasheet below.

€14.95* €44.95* (66.74% saved)

HIGO / Julet extension cable 30 cm for ebike, 2 PIN female HIG-POL-2ADR-FEM

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / 1x Julet female, 1x open end Water resistance: IP65 Cable length: ~ 30 cm Plug connection: 1x red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€6.95*

Cutsomers also bought

Tip

204 E-Speedster Whitewall Tire 20 x 4 inch VRESP204WW

204 E-Speedster Whitewall Extra Wide Tire 20 x 4 The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air 102 - 406 26 TPI Edurance Compound E-Bike 50, ECE - R75 8-20 PSI (0.6 - 1,4 bar) For custom and chopper bikes like the Schwinn New Stingray. This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim. Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure. Weight: ~ 1,4 kg (~2,6 pounds) If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast. This offer includes 1 piece only

€57.95*

UD black crankset LASCO 152 mm, square, 52 teeth UD1952

UD black crankset LASCO 152 mm, square, 52 teeth black steel chainring with 52 teethblack aluminum crankspedal arm length 152 mm for pedals with 9/16 threadblack aluminium chain guardThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts

€39.95*

UD rear derailleur Shimano Tourney RD-FT35-A-SS 6/7-speed RD-TY300-SGS

RD-FT35-A-SS The Shimano Tourney FT35 7-speed rear derailleur has a short cage and is compatible with 6/7-speed systems. Ideal for older bikes or models with entry-level transmission systems, the Shimano Tourney FT35 7-speed rear derailleur offers reliable shifting performance in difficult terrain and riding conditions. FEATURES Less maintenance by suitable feature Double tension rear derailleur Wheel-type cable guide pulley for strong against cable bending Enough lower profile, Enough ground clearance to avoid rear derailleur to hit obstacles Upgraded appearance (RD-FT55) Interchangeable with SHIMANO MTB 7/6-speed system Front single use only Compatible with 11T top rear sprocket (total capacity 17T)

€11.99*

204 Vee Rubber E-Mission Command Tire 20 x 4 black VREMC204BK

E-Mission Command Tire 20 x4 black Diameter: 406 ETRTO 102 - 406 For custom and chopper bikes like the Schwinn New Stingray. This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,,22 inches) rim the tire is about 97 mm (~ 3,82 inches) wide and it will 90 mm (~ 3,54 inches) protrude over the rim, diameter over all ~ 59 cm (~ 23,23 inches) 26 TPI Endurance Compound E-Bike ready 50, ECE-R75 8-20 PSI (0.6 - 1.4 bar) Weight: ~ 1,6 kg (~3,53 pounds) If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast. This offer includes 1 tire.

€49.95*

Rim tape Cut Out 20 inch, 65 mm wide, black RIM-TAP-204-BLA

Wide rim tape 20 inch, black Wide and durable pvc rim tape, especially suitable for rims with cut outs. Details: Material: PVC Width: 65 mm / 2,56 inch Length: approx. 620 mm / 24,41 inch double laid Colour: black Design: closed rim tape with valve hole (AV) General information:The rim tape protects the tube from damage by the rim. Spoke nipples, rim holes and possible metal burrs of the rim could otherwise damage the bicycle inner tube. Rim tapes are placed around the rim and are made of durable and sturdy material. Assembly:The rim tape is closed and is pulled onto the wheel with appropriate tension and then moved into position.

€6.95*