Bolt and counter plate for side stands

€1.95*

Product number: 430809
Product information "Bolt and counter plate for side stands"
  • Bolt and counter plate for side stands
  • 60 mm (~2,36 inches) screw M10 x 50 mm (~1,97 inches) thread
  • with stop washer
  • Zinc plated

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Handlebar Reducer / Spacer 22,2 - 25,4 mm Y965
Handlebar Reducer / Spacer 22,2 - 25,4 mm (~0,87 - 1 inch) Reduces from 25,4 mm (~ 1 inch) to 22,2 mm (~0,87 inch) 2 pieces, alloy, corrugated Length: 44 mm (~1,73 inches)

€4.99*
Kickstand alu, from 20 - 29 inch 430719
Kickstand, from 20 - 29 inch. alu, black integrated spring for chain strut height from 28 cm to 37,5 cm (~11,02 to 14,76 inches) Can be shortened further on with little technical efforts

€9.95*
Handlebar Reducer / Spacer 22,2 - 25,4 mm black Y964
Handlebar Reducer / Spacer 22,2 - 25,4 mm (~0,87 - 1 inch) Reduces from 25,4 mm (~ 1 inch) to 22,2 mm (~0,87 inch) 2 pieces, aluminum, black, corrugated Picture 2 shows article number 965 (same article in silver). Length: 44 mm (~1,73 inches)

€4.99*
%
Inner Cable Housing for Brakes 2m 372079
Inner Cable Housing for Brakes 2 m (~2,19 yards) made of stainless wire diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches) with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches) ready greased 1 piece

€1.99* €2.49* (20.08% saved)
Tip
Streetking Whitewall Balloon Tire 26 x 2.125 57 x 559 Y250
Streetking Whitewall Balloon Tire 26 x 2.125 57 - 559 nostalgia whitewall tire for the ultimate old school look! width of inflated tire: 55 mm (~2,16 inches) This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95 inches) width! But please check frame/fork for clearance! If you assemble the tire on wide rims not to put more pressure than 16 PS. It could blast.

€29.95*
1/2 to 9/16 Pedal Thread Adaptors Z-1320
1/2" to 9/16" Pedal Thread Adaptors Black, CRO MO These adaptor bushings have a male 1/2"-20 thread to fit into your one-piece crank, and a standard 9/16"-20 female thread that will let you install standard 9/16" pedals, even modern clipless pedals. These install with a 15 mm (~0,59 inches) pedal wrench. Length over all: 32 mm (~1,26 inches) Brings the pedal 21 mm (~0,83 inches) more out Weight 54 gr. (~0,12 pounds)/pair Perfect Quality 9/16 Zoll = 14.28 mm 11/20 Zoll = 14 mm 1/2 Zoll = 12.7 mm

€23.95*