Original UDX hardtail frame, raw
Product information "Original UDX hardtail frame, raw"
Original UDX hardtail frame, raw
Build your own e-bike!
Made in Europe!
Details:
- Paintwork: Without - raw
- Steel
- Hardtail
- Possible rim and tyre sizes: 20" rims up to 102 mm / ~4 inches width, maximum tyre size 20 x 4.0
- Bottom bracket: BSA 120 mm / 4,72 inches
- Head tube diameter: 44 mm / 1,73 inches (measured inside)
- Seatpost mount for 32 / 1,26 inches mm seatposts
- Disc brake mount: yes
- Coaster brake mount: no
- derailleur: yes
- Side stand plate: yes
- Various mounting points on the rear triangle
- Head tube length: 150 mm / 5,90 inches
- Rear triangle width: 195 mm / 7,67 inches
- Dimensions:
- seat post mount -> head tube: ~ 565 mm / 22,24 inches
- seat post mount -> bottom bracket: ~ 470 mm / 18,5 inches
- seat tube: ~ 440 mm / 17,32 inches
- Weight: ~ 5.8 kg / 12,78 lbs
- various mounting points for e.g. batteries, controller....
Original frame from the UDX bike series by Urban Drivestyle Berlin!
Login
Accessory Items
TSP Custom Frame Wave HC 170mm + Demon Fork HC
FTSPHC17
€799.95*
NEW!!
TSP Custom Frame Wave HC 170mm + Demon Fork HC
More than 100 years tradtion in frame building meets modern custom design in perfection.
TSP made it: they designed the perfect wave to cruise. The TSP Wave HC frame is a custom-made bike frame crafted in TSP workshops in Italy and is the ultimate and the most extreme design of bike frames. The Hard Core is near to those of our Wave line but lower and more aggressive! Even though overall extreme, it is easy to drive and suitable for long cruises.
It can be used in thousands of different configurations, giving vent to all your creativity: it can fit virtually any component on the market such as forks (cruiser, double crown, springer), rims (24″, 26″ up to 150 mm (~5,9 inches)), tires (24″ up to 4.5, 26″ up to 4.5″), handlebar (every model on the market), hubs (coaster brake, automatic gearboxes, integrated gearboxes, disc brakes).
Another unique feature of this chassis is the very low weight: about 25% less than other chassis of the same category!
It is one-size and suitable for people between 1,60 and 1,90 m (~5,25 - 6,23 ft).
All tsp frames / forks are not constructed for motorized vehicles, no matter if its a combustion or electric engine. If the frame is used with any kind of engine it's warranty will expire immediately.
A special highlight: Wheels 24 inch, 26 inch with 150 mm (~5,9 inches) rims
Colour: uncoloured / raw
possible rim sizes: 24" 26" up to 150 mm (~5,9 inches) width
bottom bracket size: BMX (US) 100 mm (~3,94 inches) with Conversion Kit OPC to BSA
head tube: 1 1/8"
needed seat post: 27,2 mm (~1,07 inches)
disc brake mounting possible: no!
coaster brake mounting possible: yes!
bike rider height: from 1,60 m to 1,95 m (~5,25 - 6,4 ft)
frame steel: tig welding cr-mo
head tube length: 140 mm (~5,51 inches)
width between chain stays: 170 mm (~6,69 inches)
dimensions:
seat -> head tube: ~746 mm (~29,37 inches)
seat -> bottom bracket: ~610 mm (~24 inches)
Length over all: 1160 mm (~45,67 inches)
weight: about 5,7 kg (~12,57 pounds)
Demon Fork HCDemon Fork TSP HC Custom ForkExceptional Custom Fork for all rims up to 100mm width. Innovative, italian Design connects rolling easiness with reliable stability.TSP sets new standards and shows again manual perfection.Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 24 oder 26 inch tires
up to 100 mm (~3,94 inches) rim width,
1 1/8 inch shaft,
Length of shaft: 240 mm (~9,45 inches)
Brake: you can install left 160 mm (~6,3 inches) disc brakes with the special support included in the package.
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Raw Beast, Combination of Fork and Handlebar Production sample
F303
€379.95*
Raw Beast - Production sample
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: without, raw
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
TSP Custom Frame Wave HC 130mm + Demon Fork HC
FTSPHC13
€699.95*
NEW!!
TSP Custom Frame Wave HC 130mm + Demon Fork HC
More than 100 years tradtion in frame building meets modern custom design in perfection.
TSP made it: they designed the perfect wave to cruise. The TSP Wave HC frame is a custom-made bike frame crafted in TSP workshops in Italy and is the ultimate and the most extreme design of bike frames. The Hard Core is near to those of our Wave line but lower and more aggressive!
Even though overall extreme, it is easy to drive and suitable for long cruises.
It can be used in thousands of different configurations, giving vent to all your creativity: it can fit virtually any component on the market such as:
forks (cruiser, double crown, springer)
rims (24″, 26″ up to 100 mm)
tires (24″ up to 4.5, 26″ up to 3.5″)
handlebar (every model on the market)
hubs (coaster brake, automatic gearboxes, integrated gearboxes, disc brakes)
Another unique feature of this chassis is the very low weight: about 25% less than other chassis of the same category!
It is one-size and suitable for people between 1,60 and 1,90 m.
All tsp frames / forks are not constructed for motorized vehicles, no matter if its a combustion or electric engine. If the frame is used with any kind of engine it's warranty will expire immediately.
A special highlight: Wheels 24 inch, 26 inch with 100 mm (~3,94 inches) rims
Colour: uncoloured / raw
possible rim sizes: 24" 26" up to 100 mm (~3,94 inches) width
bottom bracket size: BMX (US) one piece crank
head tube: 1 1/8"
needed seat post: 27,2 mm (~1,07 inches)
disc brake mounting possible: no!
coaster brake mounting possible: yes!
bike rider height: from 1,60 m to 1,95 m (~5,25 - 6,4 ft)
frame steel: tig welding cr-mo
head tube length: 140 mm (~5,51 inches)
width between chain stays: 130 mm (~5,12 inches)
dimensions:
seat -> head tube: ~746 mm (~29,37 inches)
seat -> bottom bracket: ~610 mm (~24 inches)
Length over all: 1160 mm (~45,67 inches)
weight: about 5,7 kg (~12,57 pounds)
Demon Fork HCDemon Fork TSP HC Custom ForkExceptional Custom Fork for all rims up to 100 mm (~3,94 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 24 oder 26 inch tires up to 100 mm (~3,94 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches)
Brake: you can install left 160 mm (~6,3 inches) disc brakes with the special support included in the package
Length over all: 705 mm (~27,76 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Black Beast, Combination of Fork and Handlebar
F302
€399.95*
Black Beast
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: Black, satin. powder coated
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Customers also bought
New
Fat Bike Plastic Fender Set 26 x 4.0 - 4.8 124 mm Black matte with Stays extra wide
1509
€79.95*
Fat Bike Plastic Fender Set 26 x4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
124 mm (~4,88 inches) wide, 26 inch., black matte
Can also be fitted on 24 x 4 1/4 Tires
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 770 mm (~30,31 inches)
Diameter outside: ~ 810 mm (~31,89 inches)
Rear length in circumference: ~1190 mm (~46,85 inches)
Front length in circumference: ~ 700 mm (~27,56 inches)
Polycarbunate plastic black matte
Weight: ~ 1200 g. (~2,65 pounds)
Fat Bike Cartridge B.B. Set for 120mm housing
BOT-BRA-UNI-120
€15.95*
Fat Bike Cartridge B.B. Set for 120mm housing
black
for 120 mm bottom bracket housing
total length (L1): 180 mm (~7,08 inches)
L2: 32 mm (~1,26 inch)
~ 400 gr.
BSA, JIS
sealed bearings
compatible with Shimano tools
UD special headset Ahead 1 1/8 inch black
UD100
€34.95*
UD special headset Ahead 1 1/8 inch black
durable and high quality 1 1/8" headset Ahead
for 1 1/8 inch shaft diameter
color: black
sealed roller bearings
Outer diameter bearing shell: 44 mm
Original headset for the Moke or Swing from Urban Drivestyle in Berlin
Not suitable for forks with threaded shaft!
Tip
New
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 124 mm Black matte with Stays extra wide
1520
€74.95*
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar.
Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected.
The fenders are therefore also suitable for many common 20-inch Fat E-bikes.
124 mm (~4,88 inches) wide, 20 inch., black matte
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 550 mm (~21,65 inches)
Diameter outside: ~ 610 mm (~24 inches)
Rear length in circumference: ~ 960 mm (~37,8 inches)
Front length in circumference: ~ 620 mm (~24,4 inches)
Polycarbunate plastic black matte
Weight: ~ 1080 g. (~2,65 pounds)
Tire Fat Bike Classic Cycle Zig Zag 20 x 4.0 97/102-406
ZZ204BKBK
€59.95*
204 Bike Tire Classic Cycle Zig Zag 20 x 4.0
97/102-406
27 TPI
New Over Ride
Endurance Compound
E-Bike Ready 50
ECE-R75
max load = 155kg/pc
About 87 - 105 mm (~3,42 - 4,13 inches) wide on a 82 mm (~3,22 inches) rim.
About 110 mm (~4,33 inches) wide on a 102 mm (~4,01 inches) rim.
This tire fits on all 20" Classic Cycle rims from 60 to 102 mm (~2,36 to 4,01 inches) width! But please check frame/fork for clearance!
The pictures shows the new Zig Zag Tire assembled on a 102 mm (~4,01 inches) wide rim.
Diameter complete: 595 mm + / - 20 mm (~23,42 +/- 0,79 inches) concerning to pressure and rim diameter.
Weight: 1810 g (~ 4 lb)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 piece
Tube recommendation: For rim widths up to 102 mm (~4 inches): 26 x 4.0 tube. For wider rims: till 26 x 5.0 tube
%
204 Front Wheel 20 x 4 inch Fat Bike 80 mm black for Disk silver Hub, 2nd choice
UD6589
€129.95*
€149.95*
(13.34% saved)
204 Front Wheel 20 x 4 inch Fat Bike 80 mm black with silver hub and disk mount, 2nd choice
20 x 4 inch Fat Bike front wheel
black matte anodized alu rim,
36 Spokes 2,6 mm
strudy, strong and sexy
alumnium silver Hub with disc brake mount 44 mm 6 holes
over locknut dimension: 135 mm
axle 9,5 mm diameter with bolt on
rim width: 80 mm
weight: ~ 1550 g
Hint:
According to the picture, the spoke holes in the rim base are a little unsightly - unheard of with obligatory use of a rim tape!
Surface shows oily traces due to production.