UD Lamp attachment for mounting on 6.5 inch Moke front lamp

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets Original UDX BMX part from Urban Drivestyle Berlin

UD 204 Double Crown Suspension Fork Fatbike air-suspension, matt black For 20 inch wheels with hubs of 135 mm installation width. Adjustable preload. 1 1/8" shaft Ahead Distance between axle centre and shock tower: ~ 330 mm Distance between upper edge of upright pipes to axle mount: ~ 600 mm Weight approx. 2.7 kg (with 220 mm shaft) For disc brake disc (160 mm without adapter) PostMount Scope of delivery: 1 piece Steerer length 220 mm Steerer diameter / stem width: 28,6 mm Steerer diameter at cone seat: 30 mm Installation hight: 420 mm For Hub width: 135 mm Travel: ~ 100 mm Suspension: Air in left stanchion Damping: Oil in right stanchion Distance between steerer tubes at tyre height: ~ 115 mm Original fork of the bikes from Urban Drivestyle Berlin!

Limited Edition! Now is your chance to get your hands on these limited edition speedster tires, only 100 produced worldwide in this colour. Available exclusively at classic-cycle for a limited time while supplies last! 204 E-Speedster sandy beige! Extra Wide Tire 20 x 4  The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air 102 - 406 26 TPI Performance Compound E-Bike 50, ECE - R75 8-20 PSI (0.6 - 1,4 bar) For custom and chopper bikes like the Schwinn New Stingray. This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim. Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure. Weight: ~ 1455 g / 3,20 lbs If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast. This offer includes 1 piece only

Valve Caps Flower 1 pair, fits on all standard auto / car / motorcycle valves The ultimate custom hot rod look for Your bike!

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 100 mm (~3,94 inches)  Thick: 1,3 mm (~0,051 inches) Length: 2350 mm (~ 92,52 inches) ~ 400 g (~ 0,88 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

UDX BMX handlebar, black 700 mm wide rise 22 cm Hi-Ten steel Stem mount: 22.2 mm Distance between the mount and the topbar: ~ 150 mm Diameter topbar: ~ 22.2 mm Original handlebar from the UDX Bike Series by Urban Drivestyle Berlin!