Bafang LCD 3" Display C961

Classic Cycle

€53.95*

Prices incl. VAT plus shipping costs

Product number: UDC961

Product information "Bafang LCD 3" Display C961"

Bafang LCD 4" Display C961

Technical specifications

Type of display: LCD
Display: Matrix Display
Rated Voltage(DCV): 36/43/48
Support Modes: 0-5
Operating Temperature: -20 - 45℃
Weight: ~ 60g

Installation parameter

Bus system: UART
Dimensions 108 x 58 x 55 mm
Handlebar diameter: Ø 22.2 mm
Cable Length: ~ 200 mm
Connector Type: Jullet 5 PIN, female, green

Display indications

Current speed (km/h)
Maximum speed (km/h)
Average speed (km/h)
Duration of single trip
Distance of single trip
Total Distance
Reset single trip Duration
Reset single trip Distance
Capacity
Error code display
Walk Boost
Backlight
Time

Tests & Certification

IP code: IP 65 standard
certifications: CE / EN 15194 / REACH / ROHS

Original part from Urban Drivestyle Berlin

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

Tube 20 x 4.0 - 4 1/4 inch. AV Y957

Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm

€13.95*

Bafang wiring harness 1T4, waterproof, 70 cm / 27,55 inches CAB-TRE-1T4-MK-070

Bafang wiring harness 1T4 Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€22.95*

UD special headset Ahead 1 1/8 inch black UD100

UD special headset Ahead 1 1/8 inch black durable and high quality 1 1/8" headset Ahead for 1 1/8 inch shaft diameter color: black sealed roller bearings Outer diameter bearing shell: 44 mm Original headset for the Moke or Swing from Urban Drivestyle in Berlin Not suitable for forks with threaded shaft!

€34.95*

UD Seat latch plastic clip SEA-LOC-ANG

Seat latch plastic clip This elongated plastic part holds the seat of your UNI MK closed. It is attached to a frame strut with one/two M4 bolts (depending on the year of manufacture of the bike) so that the seat can lock into place. It is compatible with all UNI MK versions from V1 onwards and all mounting parts are included. Material: Moulded plastic Colour: Black Dimensions: 10cm x 1cm x 2cm (L x W x H) Includes: Plastic seat fastener, mounting parts (3x M4 bolts, nut). Original spare part from Urban Drivestyle Berlin!

€14.95*

UDX Spacer aluminium 15 mm for 1 1/8" stem, black UD13356

Spacer ring / Spacer Alu for 1 1/8" stems, 15 mm high Inner diameter: 28,58 mm / 1,125 inches Outer diameter: 34 mm / 1,34 inches Height: 15 mm / 0.6 inches Colour: black Original stem / spacer of the UDX Bike series by Urban Drivestyle Berlin

€1.39*