UD Silverfish battery 48V 19.2Ah 920Wh

€549.95*

Product number: BAT-SIL-48V-192

Product information "UD Silverfish battery 48V 19.2Ah 920Wh"

Silverfish battery 48V 19.2Ah 920Wh

Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.

Our 48V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.
The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.

The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.

Features of the battery

Manufacturer: LG cells in Silverfish housing
Voltage: 48V
Capacity: 920Wh = 48V x 19.2Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7,5 cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!

Note:
From the V5 UNI Bike models (frame number starts with 05....) we only have 48V systems for 250W & Export versions!

* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Zubehör

E-bike battery base plate UD13315

Battery base plate for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Base plate material: PC + ABS A matching self-adhesive seal / padding and the battery contacts can be purchased separately. Original part from Urban Drivestyle Berlin!

€8.95*

Seal for battery base plate UD13317

Seal for battery base plate suitable for article UD13314 and UD13315 self-adhesive Original part from Urban Drivestyle Berlin!

€3.95*

E-bike battery base plate with battery contacts UD13314

Battery base plate with battery contacts for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Seal / padding glued to the rear side Base plate material: PC + ABS cable length: ~ 200 mm Original part from Urban Drivestyle Berlin!

€14.95*

Battery contacts for e-bike UD13316

Battery contacts for e-bike cable length: ~ 200 mm A base plate for the battery and the matching self-adhesive seal / padding can be purchased separately. Original part from Urban Drivestyle Berlin!

€9.95*

Mounting rail for SilverFish saddle tube batteries UD13339

Mounting rail for SilverFish tubular saddle battery / tubular saddle battery Details: total width: ~30 mm width of rail: ~ 16 mm length: ~ 390 mm colour: black Original part from Urban Drivestyle Berlin!

€9.95*

Cutsomers also bought

UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*

Original UDX hardtail frame, black matte UDX-FRA-BK-100

Original UDX hardtail frame, black matte Build your own e-bike! Made in Europe! Details: Paintwork: black matte powder-coated - slight traces due to production or storing may occur Steel Hardtail Possible rim and tyre sizes: 20" rims up to 102 mm / ~4 inches width, maximum tyre size 20 x 4.0 Bottom bracket: BSA 100 mm / 3,94 inches Head tube diameter: 44 mm / 1,73 inches (measured inside) Seatpost mount for 32 / 1,26 inches mm seatposts Disc brake mount: yes Coaster brake mount: no derailleur: yes Side stand plate: yes Various mounting points on the rear triangle Head tube length: 150 mm / 5,90 inches Rear triangle width: 195 mm / 7,67 inches Dimensions: seat post mount -> head tube: ~ 565 mm / 22,24 inches seat post mount -> bottom bracket: ~ 470 mm / 18,5 inches seat tube: ~ 440 mm / 17,32 inches Weight: ~ 5.8 kg / 12,78 lbs various mounting points for e.g. batteries, controller.... Original frame from the UDX bike series by Urban Drivestyle Berlin!

€299.95* €379.95* (21.06% saved)

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws UDX-BMX-STE

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets Original UDX BMX part from Urban Drivestyle Berlin

€19.95*

UDX BMX handlebar, matt black HAN-BAR-BMX-UDX-MATT

UDX BMX handlebar, matt black Width: ~ 700 mm Raise: ~ 180 mm Hi-Ten steel Stem mount: 22.2 mm Distance between the mount and the top bar (measured centre to centre): ~ 120 mm Diameter top bar: ~ 22.2 mm Colour: matt black powder coated Original handlebar from the UDX Bike Series by Urban Drivestyle Berlin!

€29.95* €32.95* (9.1% saved)

204 Kenda Kraze 20 x 4 1/4 Oldschool Tire 522099

Tire Kenda Kraze 20 x 4 1/4 97-406 THE ultra fat custom tire with oldschool tread The ultimate custom cruiser tire for maximum performance! On 82 mm (~3,23 inches) rim as shown it is 98 mm (~ 3,86 inches) wide and 61 mm (~ 2,4 inches) high (above the rim). This tire fits rims of widths 67 mm (~2,64 inces) to 102 mm (~4,02 inches) width! If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast. But please check frame/fork for clearance! Weight: 1430 g (~ 3,15 pounds) 30 TPI

€49.95*