E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination

Classic Cycle

€74.95*

Prices incl. VAT plus shipping costs

Product number: G3150

Product information "E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination"

E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination

Good looking design and best quality
The E-Bike rear light to mount on frametube or carrier with LED technology.
Operates with Julet Mini connectors 2 pins to battery controller
Equipped with powerful LEDs
Alu casing black matte with red lens and guard
Length: 90 mm (~3,54inches)
Hight: 59 mm (~2,32 inches)
Width: 65 mm without screws (~ 2,56 inches)
Cable length ~ 500 mm (~ 16,68 inches)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Geaser special Fender Set 26 100 mm Black GR067

Greaser Fender Set 26 inch. long and Fender Stays 100 mm width 100 mm (~3,94 inches) wide, 26 inch.,glossy black and long complete fender set for your Greaser E-Bike or similar bike types Width: 100 mm (~3,94 inches) Hight: 30 mm (~1,18 inches) Inside diameter: approx. 690 mm (~27,16 inches) Outside diameter: approx. 760 mm (~29,92 inches) Rear lenght in circumference: ~126 cm (~49,61 inches) Front length in circumference: ~ 77 cm (~30,31 inches) Steel glossy black laquered Weight: ca. 1,65 kg (~3,64 pounds) On chainside of the rear fender you will find a benting to give way to the chain. comes with 2 speicial clips for front fork

€69.95* €89.95* (22.23% saved)

Cutsomers also bought

HIGO / Julet extension cable 100 cm for ebike, 2 PIN female to male, red HIG-LIG-100

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€9.95*

12V Converter / DC Converter 48V Higo LIG-CON-48V-HIG

DC converter / voltage transformer with HIGO / Julet connections Input: 7 - 60 VDC Connector: 1x 2-pin HIGO / Julet female, red Output: 12V / 1000 mA Connector: 2x 2-pin HIGO / Julet male, red Total length incl. plug: ~ 30 cm Converter size: 43 x 21 x 10 mm General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

HIGO / Julet extension cable 50 cm for ebike, 2 PIN female to male, red HIG-LIG-050

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 50 cm / 19,68 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€8.95*

Street KING Cruiser Redwall Balloon Tire 26 x 2.125 57 x 559 1282

Street King Redwall Balloon Cruiser Tire 26 x 2.125 57 x 559 cool custom redwall tire for the ultimate look! width of inflated tire: 55 mm (~2,16 inches) on 30 mm (~1,18 inches) Rim 63 mm (~2,48 inches) on 56 mm (~2,20 inches) rim This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95) inches width! But please check frame/fork for clearance! If you assemble the tire on wide rims not to put more pressure than 30 PSI

€28.95* €29.95* (3.34% saved)

Stone guard / lamp attachment striped G3112

Lamp attachment / stone guard to attach to G3114 and G3123 front lamps. Without Lamp!

€29.90*