Limited Edition E-Speedster purple with black sidewall, Tire 20 x 4 inch

€99.95*

% €129.95* (23.09% saved)

Product number: VRESP204PUBK

Product information "Limited Edition E-Speedster purple with black sidewall, Tire 20 x 4 inch"

Limited Edition!

Now is your chance to get your hands on these limited edition speedster tires, only 100 produced worldwide in these slick and riveting colors.

Available exclusively at classic-cycle for a limited time while supplies last!

204 E-Speedster purple with black sidewall

Extra Wide Tire 20 x 4

The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air

102 - 406

26 TPI

Performance Compound

E-Bike 50, ECE - R75

8-20 PSI (0.6 - 1,4 bar)

For custom and chopper bikes like the Schwinn New Stingray.

This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!

On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim.

Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure.

Weight: ~ 1455 g / 3,20 lbs

If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.

This offer includes 1 piece only

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Tube 20 x 4.0 - 4 1/4 inch. AV Y957

Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm

€13.95*

Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches) Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs) Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*

Tip

204 Suspension Fork RST Guide 20 Zoll TNL Fatbike 1 1/8 Ahead for Disc Brake 204RST20

204 Suspension Fork RST Guide 20 Zoll TNL Fatbike 1 1/8 Ahead for Disk Brake Turn & Lock-out A hydraulic cartridge damping system with compression adjustment to lockout function. The RST Guide TNL is the Suspension Fork for 20" Fat Bikes / Urban E-Bikes for 20 inch wide wheels with 135 mm hubs. Lockout and Preload adjustable 1 1/8" steerer Ahead Weight: ~. 3,37 kgs (with 200 mm long steerer) For Disc brake Post Mount 6 comes with manual Steerer length 260 mm Steerer diameter / stem width: 28,6 mm Steerer diameter at cone seat: 30 mm Installation hight: 420 mm For Hub width: 135 mm Travel: 45 mm Ssytem: Coil in left stanchion Damping: Oil in right stanchion GUIDE 20 MODEL TNL STEERER: 28.6mm Steel CROWN PITCH: 180 mm CROWN: Aluminum Black Coating STANCHION: 32mm Steel CP Finish CASTING: Aluminum 9mm Open Dropout ADJUSTMENT: L, P FEATURES: Hydraulic Lock-Out SYSTEM: Oil (Right), Coil (Left) Coil TRAVEL (mm) 20": 45 mm BRAKE TYPE: Disc Only (160mm without adapter) WEIGHT (kgs) (w/ 200mm steerer) 3.37

€179.95*

Rimstrip 20 inch. 80 mm Y741

Rimstrip 20 inch. width: 80 mm (~3,15 inches) for the 80 or 100 mm (~3,15 or 3,94 inches) wide rims

€3.95*

Tip

204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 124 mm Black matte with Stays extra wide 1520

204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar. Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected. The fenders are therefore also suitable for many common 20-inch Fat E-bikes. 124 mm (~4,88 inches) wide, 20 inch., black matte complete plastic fender set for Fat Bikes or similar bike types Width: 124 mm (~4,88 inches) Hight: 35 mm (~1,38 inches) Diameter inside: ~ 550 mm (~21,65 inches) Diameter outside: ~ 610 mm (~24 inches) Rear length in circumference: ~ 960 mm (~37,8 inches) Front length in circumference: ~ 620 mm (~24,4 inches) Polycarbunate plastic black matte Weight: ~ 1080 g. (~2,65 pounds)

€74.95*

Cutsomers also bought

Tannus Armour puncture protection, 20 x 3.5 - 4.0 519134

The Tannus Armour is an effective 3-in-1 puncture protection system! By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims. Puncture Protection for: Tire - 75-100 x 406 / 20" x 3.5 - 4.0 *Tube - 60 - 115 x 406 / 20 x 2.4 - 3.0 Rim - 50 - 102 x 406 The all-round protection against punctures, cuts and pinching. up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area free tire and tread selection very light and reusable support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction reduces the risk of snake bites (e.g. by a strong impact) patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping With flattened tube you can continue riding at reduced speed for a short period on flat paths. easy mounting anti-pinch protection for tube mounting universal sizes for several widths If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors. recyclable weight: 350 g scope of delivery: 1 piece *Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.0 is recommended.

€49.95*

Wheel Cover, 20 inch. black Y945

Wheel Cover 20 inch black black plastic Diameter of the hole in the middle: 70 mm (~2,76 inches) Overall diameter: 385 mm (~15,16 inches) 2 pieces for one 20 inch rim

€29.95*

E-bike battery base plate with battery contacts UD13314

Battery base plate with battery contacts for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Seal / padding glued to the rear side Base plate material: PC + ABS cable length: ~ 200 mm Original part from Urban Drivestyle Berlin!

€14.95*

Moon Handle Bar, Thor, raw AL15

Moon Handle Bar, Thor raw This massive handle bar could be the crown of your custom bike. Built with square tubes combined with the regular 22,2 mm round tubes for the stem and grips. The handlle bar is raw, unpainted and fresh from manufacturer Specification: Material: Steel Width: ~ 765 mm ( ~ 30,12 inch) Diameter of round tubes: 22,2 mm ( ~ 0,87 inch) Width of square tube: 25 mm ( ~ 0,98 inch) Length of grip tube: ~ 190 mm ( ~ 7,5 inch) Width of stem mount : ~ 70 mm ( ~ 2,75)

€74.95*

Spacer 10 mm 1 1/8 alu black 390403

Spacer 10 mm (~0,39 inches) 1 1/8 alu black anodized black aluminium for 1 1/8 inch. a-head shafts / head sets

€1.34*

UDX BMX handlebar, black HAN-BAR-BMX-UDX

UDX BMX handlebar, black 700 mm wide rise 22 cm Hi-Ten steel Stem mount: 22.2 mm Distance between the mount and the topbar: ~ 150 mm Diameter topbar: ~ 22.2 mm Original handlebar from the UDX Bike Series by Urban Drivestyle Berlin!

€24.95* €32.95* (24.28% saved)