Bafang wiring harness 1T4, waterproof, 70 cm / 27,55 inches

Classic Cycle

€22.95*

Prices incl. VAT plus shipping costs

Product number: CAB-TRE-1T4-MK-070

Product information "Bafang wiring harness 1T4, waterproof, 70 cm / 27,55 inches"

Bafang wiring harness 1T4

Technical data:

Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Compatible with Bafang hub motors
Waterproof plugs / connectors
Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches
Connections:
- 1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
- 1x male 5-PIN Jullet connector green for display
- 2x female 3-PIN Jullet connector yellow for shift / brake sensor
- 1x male 8-PIN Jullet connector black for controller

General information:

HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.

A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.

Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches CAB-TRE-1T4-MK-118

Wiring harness 1T4, Bafang compatible Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

UD BAFANG Controller motor 48V UD-BA-48V

BAFANG Urban Drive Style Controller 48V Rated voltage: 48V off Voltage: 41,5 +/- 1V: Electric current: 18A +/- 1 A Original Item from Urban Drivestyle Berlin! The controller was installed on the UNI Boost with a setting of 20x4 and a maximum speed of 20 km/h.

€69.95*

Motor extension cable Julet 9 PIN, 30 cm / 11,8 inches HIG-MOT-EXT-030

Extension cable for ebike motors Technical data: Transmission of data and power between motor and cotroller Compatible with Bafang hub motors Waterproof Julet plug 9 PIN Cable length: 21.5 cm ( 8,46 inches), 30 cm (11,8 inches) incl. plug General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€16.95*

PAS KT-V12L Pedal Assist Sensor KT-V12L

PAS KT-V12L Pedal Assist Sensor Installation side: left Cable length: 130 mm Connector: 3-pin Julet connector, waterproof Fits e.g. e-bikes from Urban Drivestyle!

€14.95*

Reducer / Spacer 27,2 mm to 31,8 mm UD9811

Reducer / Spacer 27,2 mm (~1,07 inch) to 31,8 mm (~1,25 inches) 80 mm (~3,15 inches) long one piece alu

€5.95*

Short side stand for 20" bikes, black KIC-STA-SHO-BK

Short side stand for 20" bikes black Stable side stand Direct mounting on frame with KSA 40 mount Hole spacing 40 mm / 1,57 inches, with threaded through hole Optimum stand due to wide base. Also suitable for e.g. low-lying bicycle frames, e-scooters, scooters.... Material: aluminium Weight: approx. 250 g / 0.55 lbs Colour: black Length from centre of mounting points to floor: ~ 240 mm / 9.45 inches Mounting side: left

€16.95*