204 MXUS Motor 500W Rear wheel 20 x 4 - 80 mm wide
Product information "204 MXUS Motor 500W Rear wheel 20 x 4 - 80 mm wide"
204 MXUS Motor 500W Rear wheel 20 x 4 - 80 mm wide
- 20 inch rear wheel
- matt black coated aluminium rim ~ 80 mm / 3,15 inches wide
- 36 spokes 2,6 mm / 0,1 inches
- disc brake mount ~44 mm / 1,73 inches 6 hole
- Hub installation dimension approx.: ~ 190 mm / 7,5 inches
- aluminium hub with industrial bearings
- 500W
- 48V
- Fixed axle: ~ 12 mm / 0,47 inches diameter
- Axle length: ~ 265 mm
- Mounting for cassette
- Rim width: ~ 80 mm / 3,15 inches
- With rim tape
- Weight: ~ 4800 g / 10,58 lbs
Specification Motor:
| Model number | GDR-15FAT-1 | ||
| Position | Rear | ||
| Construction | Gear | ||
| Rated voltage(V) | 48 | ||
| Rated Power(W) | 500 | ||
| Weight(kg) | 4.15 | ||
| Reduction Ratio | 1:5 | ||
| Wheel Diameter(inch) | 20 | ||
| Rated speed(km/h) | 25-40 | ||
| Magnet Poles(2P) | 10 | ||
| Dropout(mm) | 190 | ||
| Brake Type | Disk brake | ||
| Operating Temperature © | -20 - +45 | ||
| Efficiency(%) | ≧78% | ||
| Color | Black | ||
| Cabling Route | Shaft center right | ||
| Noise Grade(dB) | ≤55 | ||
| IP Grade | IP54 | ||
| Salt Spary Test Standard(h) | 24/96 | ||
Login
Cutsomers also bought
204 E-Huntsman Tire 20 x 4.0 inch pure black
VRHM204BK
€69.95*
"E-Huntsman 20 x 4.0 inch tyre"
20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork!
Dimensions / Details:
ETRTO: 102 x 406
Max: 36 PSI / 2,5 Bar / 250 kPa
Over Ride E-Bike ready 50
Material: EndC - Endurance Compound
Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge.
Total diameter: 60 cm / 23,62 inches
Offered is a tyre without rim.
Weight: ~ 2250 g / ~ 4,96 lbs.
Thumb throttle for ebike or pedelec female
THU-THR-HIG
€14.95*
Thumb throttle for ebike or pedelec female
Control the power of your motor from the comfort of your handlebars!
The thumb throttle is simply connected / connected to the wiring harness of your bike thanks to the 3 PIN female Jullet Higo, Nexmo connector.
Details:
Connectors: 3 PIN female Jullet, Higo, Nexmo, yellow.
Cable length: ~ 47 cm
Mounting: handlebar with 22.2 mm diameter, left and right handlebar side possible
compatible with Bafang motors
Original thumb throttle from Urban Drivestyle Berlin!
Motor extension cable Julet 9 PIN, 70 cm / 27,56 inches
HIG-MOT-EXT-070
€18.95*
Extension cable for ebike motors
Technical data:
Transmission of data and power between motor and cotroller
Compatible with Bafang hub motors
Waterproof Julet plug 9 PIN
Cable length: ~ 60 cm ( 23,6 inches), 70 cm (27,56 inches) incl. plug
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Rimstrip 20 inch. 80 mm
Y741
€3.95*
Rimstrip 20 inch.
width: 80 mm (~3,15 inches)
for the 80 or 100 mm (~3,15 or 3,94 inches) wide rims
%
UD Front Carrier / Front Cargo Rack
FRO-CAR-RAC
€89.95*
€199.00*
(54.8% saved)
Front Carrier / Front Cargo Rack
UNI MK & Swing are real utility and cargo bikes that offer comfort, high torque and enough space for luggage, passengers and more! You want to create a little more space for a bag or a backpack? Then check out our front cargo deck!
The rack is mounted on the headlight brackets and replaces the standard headlight brackets and offers decent stability thanks to support struts! This front load deck is mounted instead of the classic UNI MK 7-inch lamp. All required mounting parts are included in the scope of delivery!
Hint:
Wooden panel is not included and can be purchased separately!
Fits only UNI MK, Swing & Bobber V3 forks or newer versions.
Is not compatible with the 7-inch headlight.
Is not compatible with the RX1 suspension fork, unless you do without the support struts.
Features of the front luggage rack
Material: Chromoly steel
Colour: Black
Weight: ~ 1600g / 3,52 lbs
Dimensions:L 32cm x W 32cm x H 21cm (without support struts)
max. load: 15kg
Includes: Luggage carrier, support struts, add-on parts
Original accessories from Urban Dirvestyle Berlin