204 MXUS Motor 500 W rear wheel complete 20 x 4 - 80 mm wide

€299.95*

Product number: WHE-MXE-REA-COM-500
Product information "204 MXUS Motor 500 W rear wheel complete 20 x 4 - 80 mm wide"

204 MXUS Motor 500W Rear wheel complete with tyre and tube 20 x 4 - 80 mm wide

  • 20 inch Fat Bike rear wheel
  • black matte anodized alu rim,
  • 36 Spokes 2,6  mm black
  • disc brake mount 44 mm 6 holes
  • over locknut dimension: 190 mm
  • rim width: 80 mm
  • ready assembled
  • with 7-speed shimano SIS Cassette
  • with rim tape and tube 
  • with Innova allround tire 20 x 4
  • weight: ~ 7750 g

This Items was produced for Urban Drive Style UDX Model

 

Specification of the Motor Hub

Model number GDR-15FAT-1
Position Rear
Construction Gear
Rated voltage(V) 48
Rated Power(W) 500
Weight(kg) 4.15
Reduction Ratio 1:5
Wheel Diameter(inch) 20
Rated speed(km/h) 25-40
Magnet Poles(2P) 10
Dropout(mm) 190
Brake Type V/Disk brake
Operating Temperature © -20 - +45
Efficiency(%) ≧78%
Color Black
Cabling Route Shaft center LEFT
Noise Grade(dB) ≤55
IP Grade IP54
Salt Spary Test Standard(h) 24/96

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

%
UDX Hunter Rack luggage rack PM-1001247
The Hunter Rack luggage rack as a utility upgrade for your UDX! This robust and high-quality carrier is designed for up to 50 kg load and can even be equipped with a second seat cushion for occasional passenger rides around the block! Note: A frame adapter is available separately for the suspended Panza version.  Features of the Hunter Rack Material: Chromoly steel Colour: Black Dimensions: L 49cm x W 17cm x H 41cm (platform 41cm x 17cm) Weight: approx. 2 kg Includes: 1x Hunter Rack luggage carrier, mounting material: 4 x M10x16 screw, 4 x washers Version: X-Berg / XoppaPanzaX-Berg / Xoppa Original accessories from Urban Dirvestyle Berlin    

€59.95* €139.95* (57.16% saved)
%
Original UDX hardtail frame, black matte UDX-FRA-BK-100
Original UDX hardtail frame, black matte Build your own e-bike! Made in Europe! Details: Paintwork: black matte powder-coated - slight traces due to production or storing may occur Steel Hardtail Possible rim and tyre sizes: 20" rims up to 102 mm / ~4 inches width, maximum tyre size 20 x 4.0 Bottom bracket: BSA 100 mm / 3,94 inches Head tube diameter: 44 mm / 1,73 inches (measured inside) Seatpost mount for 32 / 1,26 inches mm seatposts Disc brake mount: yes Coaster brake mount: no derailleur: yes Side stand plate: yes Various mounting points on the rear triangle Head tube length: 150 mm / 5,90 inches Rear triangle width: 195 mm / 7,67 inches  Dimensions: seat post mount -> head tube: ~ 565 mm / 22,24 inches seat post mount -> bottom bracket: ~ 470 mm / 18,5 inches seat tube: ~ 440 mm / 17,32 inches Weight: ~ 5.8 kg / 12,78 lbs various mounting points for e.g. batteries, controller.... Original frame from the UDX bike series by Urban Drivestyle Berlin!  

€299.95* €379.95* (21.06% saved)
Seat Post Clamp 34.9 mm black SEA-CLA-35
Seat Post Clamp 34.9 mm (~1,37 inches) Alu black Colour: black Material: aluminium Inner diameter: 34.9 mm (~1,37 inches) Details: with quick release Mounting position: mounting on the seat tube Original Item from Urban Drivesytle Berlin

€4.95*
UD controller integrated in battery rail 48V 22A UD1546
UD controller integrated in battery rail 48V 22A DC Motor Controller KT48ZWSRM - XFC1F1 22A Voltage: 48V off Voltage: 40 +/- 1V Electric current: 22A +/- 1 A Battery base with 5 pins for battery connection 500 Watt Original part from Urban Drivestyle Berlin  

€159.95*
Bafang 1T4 wiring harness 70 cm / 27,55 inches with 2 PIN extension in cable protection hose CAB-PRO-VEL-085
Pre-assembled Bafang wiring harness 1T4 with 2PIN extension cable in cable protection hose. Technical data of Bafang wiring harness 1T4: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller Technical data of Extension cable for Ebike: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic Technical data cable protection hose: Keeps cables tidy and protected! Diameter: ~ 20 mm Length: ~ 850 mm Fabric hose with practical Velcro fastener over the entire length General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€32.95*
UD black crankset LASCO 155 mm, square, 52 teeth UD1966
UD black crankset LASCO 155 mm, square, 52 teeth black steel chainring with 52 teethblack aluminum crankspedal arm length 155 mm for pedals with 9/16 threadblack aluminium chain guardThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts

€39.95*