Lamp holder for front headlights, black

€14.95*

Product number: LAM-HOL-BLA
Product information "Lamp holder for front headlights, black"

Lamp holder for front headlights, black

The holders are made of chromoly steel and are available in black and white.

CHARACTERISTICS OF THE LAMP HOLDERS

  • Material: Chromoly steel
  • Colour: Black
  • Compatibility: UNI MK, Swing & Bobber V3 and above
  • Includes: 2x holder
  • Original lamp holder for the 7 inch front headlight from Urban Drivestyle!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

%
Front light LED black paint defect G3123
Retro Style for Greaser and Outsider with paint defect according to picture Diameter: ~ 160 mm (~6,30 inches) depth: ~ 140 mm (~5,51 inches) metal case The power connection is located in the case and can be easily reached through a large opening. Voltage : 9V – 85V with E4 mark (tested by a European authority and given EC approval) Top quality  the lamp can be used within a e-bike cable harness and has the typical plugs

€99.95* €119.95* (16.67% saved)
UD Moke 6 1/2 inch large main headlight UD223-078-GS
UD Moke 6 1/2 inch main headlight Asymmetrical headlight with metal housing  Side M8 mounting holes including screws. Housing in gloss black and lamp ring in black. Clear plastic lens. H4 insert with parking light (- parking light not connected), E4 approved. Dimensions: Housing diameter: 190 mm Diameter between the mounting holes: 170 mm Scope of delivery: 1 piece including H4 - HIGO plug Please order accessories separately: LED lamp article no.: LED-BUL-12V or UD3597    Note: Without bulb

€89.95*
New
Front headlight for motorbike or e-bike 6 1/2 inch glossy black 223-078-GS
Large headlight for motorbike or e-bikeUNI MK headlightDetails:Asymmetrical 6 1/2 inch headlightHousing and lamp ring in glossy blackClear glass plastic lensH4 insert with parking light (without H4 bulb and its socket)M8 mounting holes on the sideThe parking light is connected via two open cable ends.This headlight was also fitted to the UNI MK bikes at Urban Drivestyle!Dimensions :Glass diameter: ~ 176 mm (6 1/2 inch)Outer diameter: ~ 190 mmTotal depth: ~ 150 mmDepth from mounting: ~ 90 mmDiameter between the fixing holes: ~ 170 mmCable length: ~ 10 cmWeight: ~ 740 gApproval:With E-approval.The headlight has an E4 approval mark and does not require any further documents.It can therefore be installed without further ado in accordance with the installation regulations.Please order accessories separately:LED lamp Art. No.: LED-BUL-12V or UD3597 Conversion to e-bike typical HIGO connections: HIG-POL-2ADR-FEM or HIG-POL-2ADR-MALNote:Many customers use the headlight in combination with a 12V starter battery for scooters or motorbikes.

€69.95*
Front light LED chrome G3114
Retro Style Front Light for Greaser and Outsider Diameter: ~ 160 mm (~6,3 inches) depth: ~ 140 mm (~5,51 inches) Metal case chromed The power connection is located in the case and can be easily accessed through a large opening. Voltage : 9V – 85V with E4 mark (tested by a European authority and given EC approval) Top quality The lamp can be used within a e-bike cable harness and has the typical plugs

€119.95*

Accessory Items

UD Lamp holder for front headlights, white LAM-HOL-WHT
Lamp holder for front headlights, white The holders are made of chromoly steel and are available in black and white. CHARACTERISTICS OF THE LAMP HOLDERS Material: Chromoly steel Colour: White Compatibility: UNI MK, Swing & Bobber V3 and above Includes: 2x holder Original lamp holder for the 7 inch front headlight from Urban Drivestyle!

€14.95*

Cutsomers also bought

UD Moke 6 1/2 inch large main headlight UD223-078-GS
UD Moke 6 1/2 inch main headlight Asymmetrical headlight with metal housing  Side M8 mounting holes including screws. Housing in gloss black and lamp ring in black. Clear plastic lens. H4 insert with parking light (- parking light not connected), E4 approved. Dimensions: Housing diameter: 190 mm Diameter between the mounting holes: 170 mm Scope of delivery: 1 piece including H4 - HIGO plug Please order accessories separately: LED lamp article no.: LED-BUL-12V or UD3597    Note: Without bulb

€89.95*
H7 LED headlight bulb 12V for e-bikes and motorbikes LED-BUL-12V
H7 LED headlight bulb 12V for e-bikes and motorbikes You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride! Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine! Properties of the H7 LED Standard H7 base Power: 7W Voltage: 12V Light colour: 6000K Individual under E-bikes Super white light Extra long life Low power consumption  Original accessories from Urban Drivestyle Berlin!

€14.95*
HIGO / Julet extension cable 5,5 cm for ebike, 2 PIN female to male, red HIG-LIG-005
Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 5,5 cm / 2,16 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€7.95*
H7 LED headlight bulb 12V for e-bikes and motorbikes UD3597
H4 LED headlight bulb 12V for e-bikes and motorbikes You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride! Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine! Properties of the H7 LED Standard H7 base Power: 7W Voltage: 12V Light colour: 6000K Individual under E-bikes Super white light Extra long life Low power consumption  Original accessories from Urban Drivestyle Berlin!

€14.95*
New
Front headlight for motorbike or e-bike 6 1/2 inch glossy black 223-078-GS
Large headlight for motorbike or e-bikeUNI MK headlightDetails:Asymmetrical 6 1/2 inch headlightHousing and lamp ring in glossy blackClear glass plastic lensH4 insert with parking light (without H4 bulb and its socket)M8 mounting holes on the sideThe parking light is connected via two open cable ends.This headlight was also fitted to the UNI MK bikes at Urban Drivestyle!Dimensions :Glass diameter: ~ 176 mm (6 1/2 inch)Outer diameter: ~ 190 mmTotal depth: ~ 150 mmDepth from mounting: ~ 90 mmDiameter between the fixing holes: ~ 170 mmCable length: ~ 10 cmWeight: ~ 740 gApproval:With E-approval.The headlight has an E4 approval mark and does not require any further documents.It can therefore be installed without further ado in accordance with the installation regulations.Please order accessories separately:LED lamp Art. No.: LED-BUL-12V or UD3597 Conversion to e-bike typical HIGO connections: HIG-POL-2ADR-FEM or HIG-POL-2ADR-MALNote:Many customers use the headlight in combination with a 12V starter battery for scooters or motorbikes.

€69.95*