UD BAFANG Controller motor 48V

€69.95*

Product number: UD-BA-48V
Product information "UD BAFANG Controller motor 48V"

BAFANG Urban Drive Style Controller 48V

  • Rated voltage: 48V
  • off Voltage:  41,5 +/- 1V:
  • Electric current: 18A +/- 1 A

Original Item from Urban Drivestyle Berlin!

The controller was installed on the UNI Boost with a setting of 20x4 and a maximum speed of 20 km/h.

 

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

%
Original Boost scooter frame, black matt UNI-FRA-BOO-BLA
Original Boost scooter frame, black mattBuild your own e-scooter Made in Europe! The UNI Boost frame is made of chromoly steel and sets new standards in terms of robustness, safety and multifunctionality. It can be equipped with an extra large footprint that can comfortably accommodate the rider plus cargo. The Boost frame is designed for the wide 20 × 4 inch tires typical of Urban Drivestyle, giving the unique look while providing comfort and secure grip on the road. Curbs, potholes and streetcar tracks are no longer a problem. Details:Paint finish: matte black powder coat - may show production and storage related marks.CROMOLY steelScooterPossible rim and tire sizes: 20" rims up to 102 mm width, maximum tire size 20 x 4.0 / 20x 4 1/4Head tube diameter: 44 mm (measured inside)disc brake mount: yesside stand plate: yesvarious mounting points on the rear trianglehead tube length: 150 mmrear triangle width: 195 mmweight: approx. 9.8 kgvarious mounting points for e.g. batteries, controller....Original frame of the Boost series from Urban Drive Style Berlin!

€399.95* €449.95* (11.11% saved)
New
UNI MK Moke E-Bike Frame Urban Drivestyle UNI-FRA-MOK-BLA
UNI MK Moke E-Bike Frame Build your custom e-bike with the classic UNI MK e-bike frame in matte black. The UNI MK E-Bike frame comes in a classic moped design and can also be equipped with UNI MK long seat and all UD racks - just as you wish. It is 100% made of high quality ChroMo steel in Germany. Properties Material: High quality ChroMoly steel Color: Deep black Steering head bearing: 44 mm diameter / 70° inclination Bottom bracket: 120 mm length / 1.37 inch x 24 TPI diameter & thread Wheelbase: 1126 mm Max. Wheel size: 20 x 4 1/4 inch Axles: 10 mm front wheel / 14 mm rear wheel (12 mm flat for wheel mounting) Frame height (without handlebars): 465 mm Includes: Frame without fork Weight: ~ 8,1 kg Original Frame UD Moke series from Urban Drivestyle Berlin!

€399.95*
New
UNI Swing E-Bike Frame from Urban Drivestyle Berlin UNI-FRA-SWI-BLA
Build your custom vintage e-bike with the classic UNI Swing e-bike frame in matte black. The UNI Swing e-bike frame comes in the classic moped design with the comfortable low step-in and can be equipped with all UNI Swing seats and UD racks - just as you wish. It is 100% made of high quality ChroMo steel in Germany. Properties Material: High quality ChroMoly steelColor: Deep blackSteering head bearing: 44 mm diameter / 70° inclinationHandlebar: 22 mm diameterBottom bracket: 120 mm length / 1.37 inch x 24 TPI diameter & threadWheelbase: 1126 mmMax. Wheel size: 20 x 4 1/4 inchAxles: 10 mm front wheel / 14 mm rear wheel (12 mm flat for wheel mounting)Frame height (without handlebars): 465 mmIncludes: Frame without forkWeight: ~ 9,1 kgVarious mounting points for e.g. batteries, controller....Original UNI Swing frame from Urban Drivestyle Berlin!

€399.95*

Cutsomers also bought

Bafang LCD Display DP C15.U 1.1 BAF-LCD-C15
Bafang LCD Display DP C15.U 1.1 Technical specifications Type of display: LCD Display: Matrix Display Rated Voltage(DCV): 36/43/48 Support Modes: 0-5 Operating Temperature: -20 - 45℃ Weight: ~ 45g Installation parameter Bus system: UART Dimensions 65 x 46 x 44 mm Handlebar diameter: Ø 22.2 mm Cable Length: ~ 470 mm Connector Type: Jullet 5 PIN, female, green Display indications Current speed (km/h) Maximum speed (km/h) Average speed (km/h) Duration of single trip Distance of single trip Total Distance Reset single trip Duration  Reset single trip Distance Capacity Error code display Walk Boost Backlight Tests & Certification IP code: IP X5 certifications: CE / EN 15194 / REACH / ROHS Dimensions: Dimension A 65 mmDimension B 46 mmDimension C 44 mmDimension D Ø 22.2 mmDimension E 28 mmDimension F 16 mmDimension G 1.2''

€54.95*
Bafang 1T4 wiring harness 70 cm / 27,55 inches with 2 PIN extension in cable protection hose CAB-PRO-VEL-085
Pre-assembled Bafang wiring harness 1T4 with 2PIN extension cable in cable protection hose. Technical data of Bafang wiring harness 1T4: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller Technical data of Extension cable for Ebike: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic Technical data cable protection hose: Keeps cables tidy and protected! Diameter: ~ 20 mm Length: ~ 850 mm Fabric hose with practical Velcro fastener over the entire length General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€32.95*
12V Converter / DC Converter 48V Higo LIG-CON-48V-HIG
DC converter / voltage transformer with HIGO / Julet connections Input: 7 - 60 VDC Connector: 1x 2-pin HIGO / Julet female, red Output: 12V / 1000 mA Connector: 2x 2-pin HIGO / Julet male, red Total length incl. plug: ~ 30 cm Converter size: 43 x 21 x 10 mm General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*
Bafang wiring harness 1T4, waterproof, 70 cm / 27,55 inches CAB-TRE-1T4-MK-070
Bafang wiring harness 1T4 Technical data: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€22.95*
%
UNI Boost's wooden running board UNI-BST-WOO-BOA
UNI Boost's wooden running board   Specifications:Material: WoodColor: BlackDimensions: 71 cm x  39 cm x 1,5 cm Includes: 1 piece wooden running boardWeight: ~ 1550 gOriginal accessories from Urban Dirvestyle Berlin Seal SEA-WOO-BOA and self-adhesive transparent Grip - Tape anti-slip mat GRI-TAP-UNI-BOO also available

€59.95* €99.95* (40.02% saved)
Thumb throttle for ebike or pedelec female THU-THR-HIG
Thumb throttle for ebike or pedelec female Control the power of your motor from the comfort of your handlebars! The thumb throttle is simply connected / connected to the wiring harness of your bike thanks to the 3 PIN female Jullet Higo, Nexmo connector. Details: Connectors: 3 PIN female Jullet, Higo, Nexmo, yellow. Cable length: ~ 47 cm Mounting: handlebar with 22.2 mm diameter, left and right handlebar side possible compatible with Bafang motors Original thumb throttle from Urban Drivestyle Berlin!

€14.95*