Kenda K-Rad tire 20 x 3.30 pure black

€44.95*

Product number: 520059
Product information "Kenda K-Rad tire 20 x 3.30 pure black"

Kenda K-Rad tire 20 x 3.30 pure black

  • 84 x 406
  • 30 TPI
  • maximum load: 90 kg
  • 5-30 PSI / 0,4 -2.1 bar / 40 - 210 KPA
  • K-Shield
  • reflective stripes on the sidewalls
  • weight: ~ 1500 g

This tire fits on CLASSIC CYCLE 20" rims from approx. 57 mm - 82 mm width! However, please note clearance in frame and / or fork!

Dimensions, mounted on a 67 mm wide rim:

  • Width: ~ 86 mm
  • Height: ~ 72 mm above the rim edge
  • Total diameter: ~ 567 mm

Offer includes one tire only!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Tube 20 x 4.0 - 4 1/4 inch. AV Y957
Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm 

€13.95*
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*
Tip
204 Suspension Fork RST Guide 20 Zoll TNL Fatbike 1 1/8 Ahead for Disc Brake 204RST20
204 Suspension Fork RST Guide 20 Zoll TNL Fatbike 1 1/8 Ahead for Disk Brake   Turn & Lock-out    A hydraulic cartridge damping system with compression adjustment to lockout function. The RST Guide TNL is the Suspension Fork for 20" Fat Bikes / Urban E-Bikes for 20 inch wide wheels with 135 mm hubs. Lockout and Preload adjustable 1 1/8" steerer Ahead Weight: ~. 3,37 kgs (with 200 mm long steerer) For Disc brake Post Mount 6 comes with manual  Steerer length 260 mm Steerer diameter / stem width: 28,6 mm Steerer diameter at cone seat: 30 mm Installation hight: 420 mm For Hub width: 135 mm Travel: 45 mm Ssytem: Coil in left stanchion Damping: Oil in right stanchion     GUIDE 20 MODEL TNL STEERER: 28.6mm Steel CROWN PITCH: 180 mm CROWN: Aluminum Black Coating STANCHION: 32mm Steel CP Finish CASTING: Aluminum 9mm Open Dropout ADJUSTMENT: L, P FEATURES: Hydraulic Lock-Out SYSTEM: Oil (Right), Coil (Left) Coil TRAVEL (mm) 20": 45 mm BRAKE TYPE: Disc Only (160mm without adapter) WEIGHT (kgs) (w/ 200mm steerer) 3.37 

€179.95*
Rimstrip 20 inch. 80 mm Y741
Rimstrip 20 inch. width: 80 mm (~3,15 inches) for the 80 or 100 mm (~3,15 or 3,94 inches) wide rims

€3.95*
Tip
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 124 mm Black matte with Stays extra wide 1520
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch.  Fender Stays 124 mm (~4,88 inches) width Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar. Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected. The fenders are therefore also suitable for many common 20-inch Fat E-bikes. 124 mm (~4,88 inches) wide, 20 inch., black matte complete plastic fender set for Fat Bikes or similar bike types Width: 124 mm (~4,88 inches) Hight: 35 mm (~1,38 inches) Diameter inside: ~ 550 mm (~21,65 inches) Diameter outside: ~ 610 mm (~24 inches) Rear length in circumference: ~ 960 mm (~37,8 inches) Front length in circumference: ~ 620 mm (~24,4 inches) Polycarbunate plastic black matte Weight: ~  1080 g. (~2,65 pounds)

€69.95*

Cutsomers also bought

Tube 20 x 4.0 - 4 1/4 inch. AV Y957
Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm 

€13.95*
%
Tube 20 x 3.0 AV Y941
Tube 20 x 3.0 AV 20 x 3.0 AV for wide tires with car / auto valve

€9.95* €12.95* (23.17% saved)
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*
Wiring harness 1T5, waterproof, 56 cm / 22,05 inches CAB-TRE-1T5-056
Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*
%
UDX Hunter Rack luggage rack PM-1001247
The Hunter Rack luggage rack as a utility upgrade for your UDX! This robust and high-quality carrier is designed for up to 50 kg load and can even be equipped with a second seat cushion for occasional passenger rides around the block! Note: A frame adapter is available separately for the suspended Panza version.  Features of the Hunter Rack Material: Chromoly steel Colour: Black Dimensions: L 49cm x W 17cm x H 41cm (platform 41cm x 17cm) Weight: approx. 2 kg Includes: 1x Hunter Rack luggage carrier, mounting material: 4 x M10x16 screw, 4 x washers Version: X-Berg / XoppaPanzaX-Berg / Xoppa Original accessories from Urban Dirvestyle Berlin    

€59.95* €139.95* (57.16% saved)
Claw Alloy Cap Screw for Ahead Head Set 1 inch 05637000
Claw und Alloy-Cap and Screw for Ahead Head Set One time plug for 1 inch silver alloy hex screw with rubber cap

€4.95*