UD 204 Double Crown Suspension Fork Fatbike, matt black
For 20 inch wheels with hubs of 135 mm installation width.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 325 mm
Distance between axle mount and end of uprights: ~ 600 mm
Weight approx. 2.7 kg (with 270 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
270 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
unidentified
Damping:
unidentified
Distance between steerer tubes at tyre height:
~ 120 mm
Original fork of the bikes from Urban Drivestyle Berlin!
Disc brake adapter from Magura QM12, IS to PM.
Adapter enables the use of 160 / 180 mm brake discs on forks and rear triangle with IS 6" mount.
The adapter is screwed onto the IS mount of the fork or frame and allows the use of a postmount brake caliper.
Front brake disc: 180 mm
rear brake disc: 160 mm
Fork mount: IS 6
rear mount: IS 6"
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Raw Beast - Production sample
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: without, raw
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Spring Beast Black
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: black, powder coated
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Blade Fork ALCB double crown, double down raw 1 1/8 steerer
Length between lower end of steerer and acle mount: ~ 445 mm
Width in between the fork legs: ~ 115 mm
length of steerer: 250 mm
quadrangle tubes: 30x30 mm
Axle mount: 105 mm
For frame heads smaller than 145 mm
Lower end of steerer has 3 M6 holes
Unyielding Single Drop fork is held by 2 plates (10mm thick)Steerer tube: 1.1⁄8 ‘, ahead,Wheels: 24-29’ , wheels up to 100 mm wide
25x25 mm quadrangle tube
Weight: ~ 4,2 kg
Spring Beast Raw
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: without, raw
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Magura QM41 disc brake adapter, IS2000
Adapter allows the use of 180 mm brake discs on the rear triangle with IS2000 mount.
The adapter is screwed to the IS mount of the rear triangle and allows the use of a postmount brake caliper.
Rear brake disc: 160 to 180 mm
rear wheel mount: IS2000
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Double crown fork 800 mm chrome plated 1 inch shaftchrome-plated, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 800 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.6 kg
Double crown fork 800 mm black 1 inch shaftblack anodized, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 800 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.6 kg
Double crown fork 570 mm black 1 inch shaftblack anodized, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 570 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.0 kg
Hope brake adapter N for PM to IS rear wheel 180 mm silver.
Hope adapter for mounting postmount brakes on IS2000 frames. Can be used for rear wheels with 180 mm brake disc.
Please also note the data sheet below when choosing the right adapter!
Post Mount to IS
for 180 mm rear brake disc
incl. mounting bolts
silver
Disc brake adapter IS PM 160F-140R
Disc brake adapter for conversion from International Standard to Postmount 140 mm on the rear wheel or from International Standard to Postmount 160 mm on the front wheel.
Postmount adapter
for 160 mm front brake disc
for 140 mm rear brake disc
incl. mounting bolts
black
Disc Brake Adapter Front IS / PM TEKTRO A5 Disc 203 mm
TRP Tektro A5 IS/PM Adapter Front 203mmThe TRP Tektro A5 IS/PM adapter for fork with IS mount and 203mm brake disc in combination with postmount caliper.
Details:
Fork/frame type: IS (International Standard).
Brake caliper type: Postmount
Brake disc diameter: 203mm front
Weight: approx. 60 g
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Tektro Auriga Comp IS2000/PM AQ Adapter A4 180mm HR
This adapter is for use of a 180 mm disc in combination with Tektro Auriga Comp Postmount brakes on frames with an IS2000 brake mount.Details:
PM brake caliper to IS frame.
material: aluminium
for rear
for 180mm brake disc
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Double crown fork 570 mm chrome plated 1 inch shaftchrome-plated, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 570 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2 kg
Blade Fork ALCB double crown, double down black matte 1 1/8 steerer
Length between lower end of steerer and acle mount: ~ 445 mm
Width in between the fork legs: ~ 115 mm
length of steerer: 250 mm
quadrangle tubes: 30x30 mm
Axle mount: 105 mm
For frame heads smaller than 145 mm
Lower end of steerer has 3 M6 holes
Unyielding Single Drop fork is held by 2 plates (10mm thick)Steerer tube: 1.1⁄8 ‘, ahead,Wheels: 24-29’ , wheels up to 100 mm wide
25x25 mm quadrangle tube
Weight: ~ 4,2 kg
Black Beast
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: Black, satin. powder coated
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Magura QM43, IS 2000 disc brake adapter.
Adapter for use on IS 2000 forks in conjunction with Magura Postmount calipers.
adapted to 160 mm
adapted to 203 mm for Fox 40 IS forks
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
UD double bridge fork for UNI MK and UNI Swing, matt black Special fork from Urban Drivestyle Berlin! Compatible with the UD bike types UNI MK Moke and UNI Swing! Details: For 20 x 4 inch wheels Stem length / diameter: 155 mm / 1 1/8 inch Distance between axle centre and lower bridge: ~ 365 mm Distance between axle mount and end of fork tubes: ~ 600 mm Distance between the steerer tubes at tyre height: ~ 128 mm Installation height: 370 mm
Installation width: 135 mm Inner diameter of the fork tubes: 25.4 mm Weight approx. 2.55 kg (incl. steerer tube) With disc brake mount. The fork has various M6 threaded holes for e.g. lamp holders and mudguard struts.Scope of delivery: 1 x double bridge fork 4 x M6 x 16 Allen screws and washers 1 x special 1 1/8 inch steerer tube Note: You can also find the matching pair of handlebars from Urban Drivestyle in our shop!
€149.95*
This website uses cookies to ensure the best experience possible. More information...