Frame and Fork Protectorsfor Double Crown Forks 30
to protect Your frame and your double crown fork from dings and dents!
55 mm (~2,16 inches), 1 pair for 30 - 32 mm (~1,18 - 1,26 inches) tubes
Extra Wide Double Crown Fork 660 mm black
noble and supercool, for 20-26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Double Crown Fork 63 cm black
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
Alloy triple trees and black steel fork tubes for drum- or disc brakes.
The ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,39 inches)
fork tube length: about 630 mm ( ~24,80 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Double Crown TSP Custom Fork raw
NEW !!!
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Straight Italian Design guarantees reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
black matte
for 20 till 28 inch tires
up to 102 mm (~4 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down
with disk brake mount
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 107 mm (~4,12 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for rims up to 100 m (~3,94 inches).
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Extralong Double Crown Fork 83
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm
fork tube inner width: about 86 mm
fork tube length: about 830 mm
diameter of the forklegs: 31,8 mm
Width between dropouts: 100 mm
Double Crown Fork 84, chrome and polished aluminium
noble and supercool, for 20-28 inch. wheels, 1" inch steerer
alloy triple trees and chrome steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
Extra Wide Double Crown Fork 660 mm
Noble and supercool, for 20-26 inch. wheels, 1 inch stem, incl. spacer for 1 1/8 frame steerer.
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Extra Wide Double Crown Fork 900 mm black
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakesFork tube length: 900 mm (~35,43 inches) Diameter tube: 32 mm (~1,26 inches) Fork tube inner width: about 144 mm (~5,67 inches) Width between axle mounts: 150 mm (~5,90 inches) Steerer length: 295 mm (~11,61 inches) Steerer diameter: 1 inch (25,4 mm)
Double Crown Fork 73, chrome and polished aluminium
noble and supercool, for 26 inch. wheels, 1" inch steerer
alloy triple trees and chrome steel fork tubes with cantilever-/v-brake-pivots
Against the picture without clip for drum brake arm
also suitable for disc brake
steerer length: 265 mm (~10,43 inches)
fork tube inner width: about 86 mm (~3,38 inches)
fork tube length: about 730 mm (~28,74 inches)
Width between dropouts: 100 mm (~3,94 inches)
Demon Fork TSP Custom Fork
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 20 till 28 inch tires
up to 102 mm (~4,01 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down to 80 mm (~3,15 inches)
Brake mounts for disk
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount).
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Electra Triple Clamp XL Fork Double Crown 74 cm (~29,13 inches)
Electra's Triple Clamp Fork screams moto-style in stately steel.
Naturally it's an excellent replacement fork and a superb choice for those building their dream chopper.
483 mm (~19,01 inches) w/300 mm (~11,81 incehs) x 1-inch steerer 1" Threadless Steerer Tube
Heavy Duty Dropouts
Chrome-Plated Oversized Forklegs
noble and supercool, for 26 inch. wheels, 1 inch stem,
alloy triple trees and chrome-plated steel fork tubes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 300 mm (~11,81 inches)
width between fork tubes: ~ 85 mm (~3,35 inches)
Diameter of fork legs: ~ 35 mm (~1,38 inches) under the lower bridge
~ 32 mm (~1,26 inches) above the lower bridge
Width between drop outs: 100 mm (~3,94 inches)
Fork tube length: about 740 mm (~29,13 inches)
Weight : ~ 2,7 kg ( ~ 5,95 lbs)
Will be delivered with spacer for upper bridge
May fit e.g. Electra Chopper models from 2005 and earlier.
Double Crown Fork 63 cm
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,38 inches)
fork tube length: about 630 mm (~24,8 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
XXXtralong Double Crown Fork 93
noble and supercool, for up to 28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
A - fork tube length: about 930 mm (~36,61 inches)
B - Outer diameter of tubes: 31,8 mm (~1,25 inches)
B - Inner diameter of tubes: 28,8 mm (~ 1,10 inches)
C - Width inbetween fork tubes about 86 mm (~3,39 inches)
D - Width between drop outs: 100 mm (~3,94 inches)
E - steerer length: 260 mm (~10,24 inches)
F - 1 inch steerer
Weight: 2,9 kg (~6,39 pounds)
Double Crown Fork long shaft, offset 84, black
noble and supercool, for 20-28 inch. wheels, 1" inch steerer
alloy triple trees and black steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
Extra Wide Double Crown Fork 900 mm
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
Fork tube length: 900 mm (~35,43 inches)
Diameter tube: 32 mm (~1,26 inches)
Fork tube inner width: about 144 mm (~5,67 inches)
Width between axle mounts: 150 mm (~5,90 inches)
Steerer length: 295 mm (~11,61 inches)
Steerer diameter: 1 inch (25,4 mm)
Frame and Fork Protectorsfor Double Crown Forks 50
to protect Your frame and your double crown fork from dings and dents!
50 mm (~1,97 inches), 1 pair for 32 mm (~1,26 inches) tubes
Dished Sprocket, 10 mm (~0,39 inches) offset, 18 Teeth
1/2 x 1/8
helps to bring the chain 10 mm (~0,39 inches) out
Fits to shimano, sachs, sram, stumey archer 3-speed hubs, histop, ... etc.
Depth: ~ 15 mm (~0,59 inches)
inner diameter: 35 mm
American-to-Euro Conversion kit
These beautifully machined aluminum bushings fit into the shell of a one-piece-crank bottom bracket, and are threaded to accept a:
standard threaded bottom bracket
normal 68 mm (~2,68 inches) width.
3 long CrMo bolts connect the two bushings to one another for a secure mounting.
Head Set Adapter kit 1 - 1 1/8 inch.
2 pieces, alloy
to install into head of the frame to reduce head tube for using head set with smaller diameter
to reduce 1 1/8" to 1"
outer diameter: 34,0 mm (~1,34 inches)
inner diameter: 30,2 mm (~1,19 inches)
€4.95*
This website uses cookies to ensure the best experience possible. More information...