Mini Reflectors Set, 24 pieces*
24 pieces with thread and nut
colours: red, orange, blue, green
diameter: about 27 mm (~1,06 inches)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Oval Reflector, white*
red with white plastic frame
for rear fender mounting
dimensions: about 63 x 45 mm (~2,48 x 1,77 inches)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Universal holder angle for lamp or fender, stainless steel
Holder at 90° angle
leg length ~ 23 mm and ~ 15 mm
hole diameter ~ 10 mm and ~ 6 mm
Material: stainless steel
Rear lamp for dynamo to assemble on fender
~~~~~~ K 119
For Dynamo
Material:plastic red and black
Length: ~ 9,6 cm (w/o connection)
width: ~ 4 cm (w/o connection)
with + - connection
Busch + Müller LED tail light Toplight Line Small
TOPLIGHT Line Small
miniaturised LED tail light
12V DC
with 2 PIN female Higo plug (red)
cable length ~ 28 cm
Strip light function LineTec
fully automatic parking light function
mounting distance 50mm
lens colour: red
universally applicable
StVZO approved, with German test mark (K920)
Busch + Müller rear light µ E for Ebike
Small, stylish and bright - The smallest, road-legal rear light. µ [my:], pronounced mü. Minimalist and in a high-quality aluminium housing from the renowned light manufacturer Busch + Müller.
The µ is small, efficient and offers very good all-round visibility despite its small size. It is based on 12V voltage and impresses with its filigree, simple design. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included.
Features of the rear light
Material: Anodised aluminium housing, plastic
Power: < 2W
Voltage: 5-15 V
Colour: black
Diameter (luminaire): 19mm Ø
Length: 20mm
With German E-mark (not approved for vehicles subject to registration plate requirements)
Includes: LED tail light & attachments
Please refer to the manual below for further technical details.
LED Reelight Rearlight SL 500 Flashing
2,5 Lux SL500 rear light is mounted on the seat post. The light is via a small cable connected to the generator. The generator is mounted on the rear fork and the magnets on the spokes.
Key features:
No Batteries
flexible mounting
wide-angel optics
permanently mounted
always light on Maintenance-free
no friction
Contents:
1 rear light
1 generator
2 magnets
1 mounting bracket.
Weight: 200 g (~0,44 pounds)
The environment can breathe easier with bike lights from Reelight.PRESS RELEASE: The magnet powered bike lights from the Danish company, Reelight, have so far spared the environment from 30 million batteries. The lights contribute to making eco-friendly cycling an easy, safe and secure alternative to the car.
Millions of spared batteries + more safe cyclists on the roads = less CO2. The environmental accounts are a little bit greener with the use of Danish company Reelight - s magnet powered and battery-free bike lights, that flash all over the streets and bike lanes. Since Reelight launched the first model in 2005, hundreds of thousands of Danish and foreign cyclists have mounted these pioneering and eco-friendly lights. Reelight are the only bike lights in the world that light up using induction power instead of batteries, and this invention has spared the environment from 30 million batteries so far.
Make it easy to choose the bikeThe Danes are one of the nations in the world who use their pedals the most, and this widespread cycling allows both the environment and the population to breathe easier. - It is healthy for the body and the environment to cycle. That is why it is important to develop solutions to make the bicycle an attractive alternative to the car. With Reelight, the cyclists do not need to think about putting their bike lights in their pockets, or that the batteries may run out halfway through the journey. Our lights are permanently fixed and light up in both daylight and in the dark - completely without batteries. So it doesn - t get any easier, says Kenneth Linnebjerg, CEO of Reelight.
Secure, safe and freeTraffic Researchers from Aalborg University have conducted a large study in which 2,000 cyclists rode with magnetic lights from Reelight for one year. The cyclists were exposed to 32 percent fewer accidents than a comparable group with ordinary battery lights which only shone in the dark. 85 percent felt "much more" or "more" secure with Reelight on the bike. - Our mission is to improve cyclists' safety while enhancing the sense of security and freedom that cycling should be associated with. We believe that all these elements must be present before more citizens climb out of their cars and onto their bikes - to benefit both the health of the nation and the environment, says Kenneth Linnebjerg.
FACT: Three clear benefits for the environment with Reelight:1) No batteriesThe lights use induction power instead of batteries. So far, this has spared the environment from 30 million batteries. Follow the battery counter on reelight.com. 2) Durable materialsHigh quality light diodes and powerful magnets give a unique durability and therefore a long lifetime. This ensures less waste, as there are many years before the lights have to be replaced.3) Safe and secure contribution to more cyclingThere is evidence that the lights increase safety and security - crucial parameters when more people are choosing to take the bike instead of the car.
FACT: Did you know... - that you with five kilometres to work can waste half a tonne less CO2 every year by choosing your bike instead of your car -
12V clear rear light with red bright LED, brake and license plate funktion
Mini white lights style
24 clear leds for rear light and brake - glowing red when in function
4 leds for license plate
Plastic housing
with cables for 12V
with E4 and E9 approval
Top quality
Specs:
length: ~ 107 mm
hight: ~ 29 mm
width: ~ 33 mm
distance of screw holes: 95 mm middle to middle
Lamp holder for front headlights, black
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: Black
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
Universal switch for handlebar mounting
With this small and space-saving switch, various electrical components and power can be conveniently switched on from the handlebar. The switch controls connected components like an on/off button: pressing the button engages the switch and activates the connection. Pressing the button again interrupts the contact. This makes the switch particularly suitable for longer-term activation.
The switch fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
6 LED Battery Frontlamp, 80 mm (~3,15 inches) chrome
Good quality
Classic retro black lamp with modern LED!
Six LED
stylish retro LED Lamp
Metal casing
2 functions: Flash or steady
battery case inside for 3 x battery type AA (also called LR6, or AM3 )
Batteries not included
with On/Off switch on the lamp
size: 80 mm (~3,15 inches) diamter, 110 mm (~4,33 inches) long
UD Moke 6 1/2 inch main headlight
Asymmetrical headlight with metal housing
Side M8 mounting holes including screws.
Housing in gloss black and lamp ring in black.
Clear plastic lens.
H4 insert with parking light (- parking light not connected), E4 approved.
Dimensions:
Housing diameter: 190 mm
Diameter between the mounting holes: 170 mm
Scope of delivery: 1 piece including H4 - HIGO plug
Please order accessories separately:
LED lamp article no.: LED-BUL-12V or UD3597
Note: Without bulb
Universal Switch, Horn, Run - Stop, Kill Switch
switch squared for speed pedalec, engine stop, horn or e.g. override - Quad / ATV
with waterresistant rubber frame
Size of switch: ~ 27 x 27 mm
Length of cable: ~ 700 mm
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in silver (brushed aluminium)
Handlebar bracket interface
For further data, please see the datasheet below.
Busch und Müller reflector / reflex reflector K288 E1 021459
colour: red
with holder
Reflector dimensions
Width x length: approx. 55 x 50 mm
Height / thickness : approx. 14.5 mm
Weight: approx. 10 g
ECE approval / E-marking
Scope of delivery: 1 piece
Original accessories from Urban Dirvestyle Berlin
Herrmanns LED rear light bar for Racktime I-Valo wide
General information:The LED rear light set from Herrmanns was designed to fit the Racktime luggage carrier I-Valo. The slim design of the LED strip blends in perfectly with the sporty design of the rack. The electronics are well protected in the housing of the reflector mounted below.The LED bar offered here is an original spare part, suitable for Racktime I-Valo carriers.
Technical details:
Parking light function
dynamo operation
wide version ~ 124 mm wide
StVZO approved (K 910)
Scope of delivery:
1 x LED bar
Specifications:
Colour: red Type of lighting: rear lightPower source: side dynamo, hub dynamoLight source: 5 LED`sFeatures lighting: parking lightMounting option: Racktime I-Valo luggage rack
Spoke reflector / cat's eye oval
More safety in road traffic. This time with spoke reflectors of 60 mm clamping width. Roadworthiness is confirmed by the approved German test seal. So make sure they always remain visible, even in the dark.So that you can also enjoy your purchase for a long time, the cat's eye is equipped with stainless steel clips, which makes it more resistant to rust.
Approval mark: with German approval mark (area of application StVZO approved).
Special features: Stainless steel clips with 60 mm clamping width
Material: plastic
Colour: orange
Scope of delivery: 4 pieces
Reflector E1 for Racktime I-Valo Herrmanns tube, red StVZO
Product description General: The LED rear light set from Herrmanns was designed to fit the Racktime luggage carrier I-Valo. The slim design of the LED strip blends in perfectly with the sporty design of the luggage rack. The electronics are well protected in the housing of the reflector mounted below.
The reflector with housing is offered here. The reflector has StVZO approval.
Scope of delivery:1x reflector with housing
Lamp holder for front headlights, white
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: White
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
Dyno Tiki Taboo Light
The tiki light for your bike!
Original part of Dyno Taboo Tiki Beach Cruiser
Parking light, flashing or fast flashing.
For mounting on the handlebar and fender.
Alternatively you can replace the bracket and mount the Tiki on the fender.
Busch + Müller dynamo rear light Toplight Flat plus
The classic.
Design: extremely flat and light, elegant reflector integrated into two circular surfaces. 70 g light.
Like all Busch + Müller rear lights: StVZO-approved.
Toplight series
Parking light
Dynamo version
StVZO-approved
Mounting luggage carrier
LED rear light
Integrated Z-large area reflector
Weight: ~ 70 g
Dimensions: ~ 33 x 112 x 54 mm
€12.95*
€15.90*(18.55% saved)
This website uses cookies to ensure the best experience possible. More information...