Spoke 2.0 x 202 chrome plated

Classic Cycle

€0.35*

Prices incl. VAT plus shipping costs

Product number: 2.0-202-CP

Product information "Spoke 2.0 x 202 chrome plated"

Spoke 2.0 x 202 Chrome plated

size: 2.0 x 202 mm

1 piece without nipple

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Spoke Nipple 2.0 Steel UCP Nippel-GVZ

Spoke Nipple 2.0 zinc-plated Steel UCP for 2.0 mm (~0,08 inches) spokes length: 14 mm (~0,55 inches) feed size 3,2 mm (~0,12 inches) 1 piece

€0.05*

Spoke Nipple 2.0 Steel, black Nippel-sw

Spoke Nipple 2.0 Steel, black for 2.0 mm (~0,08 inches) spokes length: 14 mm (~0,55 inches) feed size 3,2 mm (~0,12 inches) 1 piece

€0.08*

New

Bottom Bracket BSA Shell Steel raw GB104

Bottom Bracket BSA Shell Steel Raw outer diameter ~ 40 mm (~1,57 inches) inner diameter: ~ 34 mm ( ~ 1,34 inches) Length: ~ 68 mm (~2,68 inches)

€9.95*

Rear End Doublestand 28/26 inch. with Adjustment 096-28

Rear End Doublestand, 28/26 inch., with Adjustment to be fixed at the rear axle, black, suitable for bikes up to to 90 kg (~198 pounds) without chain-shifting. fits on many bikes and motor assisted bicycles, like 98ers for example Width for tire: 88 mm (~3,46 inches) Strong and sturdy quality with simple finish

€21.95*

Glitter Grips red Rubber Y861

Rubber Glitter Grips like they were in the 60s/70s! the coolest grips You can put on Your Krate, Stingray or other oldschool stuff 1 Pair

€6.45*

Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches) Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs) Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*