UD 204 Double Crown Suspension Fork Fatbike, matt black

Classic Cycle

€139.95*

% €169.95* (17.65% saved)

Prices incl. VAT plus shipping costs

Product number: PM-1001397

Product information "UD 204 Double Crown Suspension Fork Fatbike, matt black"

UD 204 Double Crown Suspension Fork Fatbike, matt black

For 20 inch wheels with hubs of 135 mm installation width.

1 1/8" shaft Ahead

Distance between axle centre and shock tower: ~ 325 mm

Distance between axle mount and end of uprights: ~ 600 mm

Weight approx. 2.7 kg (with 270 mm shaft)

For disc brake disc (160 mm without adapter) PostMount

Scope of delivery: 1 piece

Steerer length	270 mm
Steerer diameter / stem width:	28,6 mm
Steerer diameter at cone seat:	30 mm
Installation hight:	420 mm
For Hub width:	135 mm
Travel:	~ 100 mm
Suspension:	unidentified
Damping:	unidentified
Distance between steerer tubes at tyre height:	~ 120 mm

Original fork of the bikes from Urban Drivestyle Berlin!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

204 Kenda Krusade Tire 20 x 4 inch 528217

204 Kenda Krusade Extra Wide Tire 20 x 4 Diameter: 406 98 - 406 Ideal for the 20 inch fat e-bikes! This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance! On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim. Diameter over all on this rim: 580 mm (22,83 inches) 60 TPI 5-30 PSI / 0,4 -2.1 bar / 40 - 210 KPA Weight: ~ 990 g (~ 2,18258 pounds) If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast. This offer includes 1 piece only

€49.95*

Tip

204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 124 mm Black matte with Stays extra wide 1520

204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar. Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected. The fenders are therefore also suitable for many common 20-inch Fat E-bikes. 124 mm (~4,88 inches) wide, 20 inch., black matte complete plastic fender set for Fat Bikes or similar bike types Width: 124 mm (~4,88 inches) Hight: 35 mm (~1,38 inches) Diameter inside: ~ 550 mm (~21,65 inches) Diameter outside: ~ 610 mm (~24 inches) Rear length in circumference: ~ 960 mm (~37,8 inches) Front length in circumference: ~ 620 mm (~24,4 inches) Polycarbunate plastic black matte Weight: ~ 1080 g. (~2,65 pounds)

€69.95*

Cutsomers also bought

Tannus Armour puncture protection, 20 x 3.5 - 4.0 519134

The Tannus Armour is an effective 3-in-1 puncture protection system! By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims. Puncture Protection for: Tire - 75-100 x 406 / 20" x 3.5 - 4.0 *Tube - 60 - 115 x 406 / 20 x 2.4 - 3.0 Rim - 50 - 102 x 406 The all-round protection against punctures, cuts and pinching. up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area free tire and tread selection very light and reusable support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction reduces the risk of snake bites (e.g. by a strong impact) patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping With flattened tube you can continue riding at reduced speed for a short period on flat paths. easy mounting anti-pinch protection for tube mounting universal sizes for several widths If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors. recyclable weight: 350 g scope of delivery: 1 piece *Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.0 is recommended.

€49.95*

204 E-Huntsman Tire 20 x 4.0 inch pure black VRHM204BK

"E-Huntsman 20 x 4.0 inch tyre" 20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork! Dimensions / Details: ETRTO: 102 x 406 Max: 36 PSI / 2,5 Bar / 250 kPa Over Ride E-Bike ready 50 Material: EndC - Endurance Compound Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge. Total diameter: 60 cm / 23,62 inches Offered is a tyre without rim. Weight: ~ 2250 g / ~ 4,96 lbs.

€69.95*

RED Tire 24 x 3.0 WHITE wall RY990

Red Tire 24 x 3.0 white wall 76-507 semi slick big and strong tire for up to 40 PSI pressure inflated about 75 mm wide Overall diameter, depending on rim width and air pressure about: 63 cm + / - 2 cm Weight: 1.3 kg This tire fits on all 24" Classic Cycle rims up to 82 mm width! But please check frame/fork for clearance! If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.

€47.95*

Headset Ahead 1 1/8 Inch Y544

Headset Ahead 1 1/8 Inch 28,6 / 34,0 / 30,0 not to be used with threaded front forks

€12.95*

New

Krate Handlebar black 671-bk

Krate Handlebar black slightly cranked black anodized Hi-Ten steel dimensions: about 800 x 330 mm (~31,50 x 12,99 inches) for 22,2 mm (~0,87 inches) stems

€28.95*

Double Crown Fork long shaft, offset 84, black 1 1/8 Schaft 1187689

Double Crown Fork long shaft, offset 84, black 1 1/8 Schaft noble and supercool, for 20-28 inch. wheels, 1 1/8" inch steerer alloy triple trees and black steel fork tubes with mount for disc brake steerer length: 320 mm (~12,60 inches) fork tube inner width: about: ~ 92 mm (~3,62 inches) fork tube length: about: ~ 840 mm (~33,07 inches) Width between dropouts: ~ 100 mm (~3,94 inches) The length of shaft can be adjusted Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches) inner diameter of fork legs: ~ 28,8 mm (~1,13 inches) Offset between shaft and fork legs: ~ 50 mm (~1,97 inches) Bridges are mounted with allen screws Fork tubes can be shortened above

€129.95*

Details