"E-Huntsman 20 x 4.0 inch tyre"
20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork!
Dimensions / Details:
ETRTO: 102 x 406
Max: 36 PSI / 2,5 Bar / 250 kPa
Over Ride E-Bike ready 50
Material: EndC - Endurance Compound
Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge.
Total diameter: 60 cm / 23,62 inches
Offered is a tyre without rim.
Weight: ~ 2250 g / ~ 4,96 lbs.
Extension cable for ebike motors
Technical data:
Transmission of data and power between motor and cotroller
Compatible with Bafang hub motors
Waterproof Julet plug 9 PIN
Cable length: ~ 33 cm ( 13 inches), 42 cm (16,5 inches) incl. plug
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
DC converter / voltage transformer with HIGO / Julet connections
Input: 7 - 60 VDC
Connector: 1x 2-pin HIGO / Julet female, red
Output: 12V / 1000 mA
Connector: 2x 2-pin HIGO / Julet male, red
Total length incl. plug: ~ 30 cm
Converter size: 43 x 21 x 10 mm
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
UNI Boost's wooden running board
Specifications:Material: WoodColor: BlackDimensions: 71 cm x 39 cm x 1,5 cm Includes: 1 piece wooden running boardWeight: ~ 1550 gOriginal accessories from Urban Dirvestyle Berlin
Seal SEA-WOO-BOA and self-adhesive transparent Grip - Tape anti-slip mat GRI-TAP-UNI-BOO also available
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 100 -120 x 406 / 20" x 4.0 - 4.8
*Tube - 90 - 120 x 406 / 20 x 3.0- 4.0
Rim - 65 - 140 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 360 g
scope of delivery: 1 piece
*Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 3.0 - 3.75 is recommended.
From our list the Kenda Kraze 20 x 4.0 won't fit. It is not bollooning enaugh.
€52.95*
This website uses cookies to ensure the best experience possible. More information...