"E-Huntsman 20 x 4.0 inch tyre"
20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork!
Dimensions / Details:
ETRTO: 102 x 406
Max: 36 PSI / 2,5 Bar / 250 kPa
Over Ride E-Bike ready 50
Material: EndC - Endurance Compound
Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge.
Total diameter: 60 cm / 23,62 inches
Offered is a tyre without rim.
Weight: ~ 2250 g / ~ 4,96 lbs.
Extension cable for ebike motors
Technical data:
Transmission of data and power between motor and cotroller
Compatible with Bafang hub motors
Waterproof Julet plug 9 PIN
Cable length: ~ 33 cm ( 13 inches), 42 cm (16,5 inches) incl. plug
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
DC converter / voltage transformer with HIGO / Julet connections
Input: 7 - 60 VDC
Connector: 1x 2-pin HIGO / Julet female, red
Output: 12V / 1000 mA
Connector: 2x 2-pin HIGO / Julet male, red
Total length incl. plug: ~ 30 cm
Converter size: 43 x 21 x 10 mm
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Urban Drive Style Controller DMHC 48V
DC Motor Controller
Voltage: 48V
off Voltage: 40 +/- 1V
Electric current: 22A +/- 1 A
Brakes Level: Low
Torque Sensor
Nine Speed 22"
Original Item from Urban Drivestyle Berlin!
Dimensions: 110 x 47 x 30 mm
Controller box, electronics box with seal for E-Bike Uni Moke and Swing
The controller box is made of robust plastic. In addition to attaching the controller to your e-bike, it also protects it.
Dimensions:
Outer dimension: ~ 21cm x 10.7cm x 3.4cm
Inner dimensions: ~ 15.5 cm x 8.2 cm x 2.5 cm
The box can be fitted to the frame of the Urban Dirvestyle Uni Moke and Swing bikes. It is screwed to the frame from below with the help of 4 screws. The cables are pulled upwards into the frame.
The scope of delivery includes the controller box and the matching self-adhesive seal.
€9.95*
This website uses cookies to ensure the best experience possible. More information...