Seat Post Clamp 29,9 mm (~1,18 inches) Aluminium
29,9 mm (~1,18 inches) inner diameter
with Inbus screw
the clean one!
suitable for SP Frames: Classic, V2, Wave...
Alu Rim 24 inch, 64 mm (~2,52 inches) wide, High Polished
DH 64 507
NEW !!! Best available Quality in wide Rims!
Solid, rigid and robust
Doublewall
The ultimate wheel for custom style choppers / cruisers!
wide:
64 mm (~2,52 inches)
Inner size:
58 mm (~2,28 inches)
holes:
36 holes 14 G
colour:
High Polished
To calculate the spoke length = ERD:
485 mm (~19,09 inches)
All 24" Classic Cycle tires 2.35 up fit on these rims! But please check frame/fork for clearance!
Stem 1 1/8 195 mm (~7,68 inches) for Springfork
195 mm (~7,68 inches) - messured from bearing seat to top of thread
chrome-plated
inner diameter: 25,4 mm / 1 inch
Stem Steel CP Humpert Ergotec CV 101
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
CP steel
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
180 mm (~7,09 inches) shaft height
60 mm (~2,36 inches) nosing with 25° angle
Using a single bolt mount won't recommend handle bars with big hights.
Banana saddle faux leather with mounting bracket for the sissy bar black.Synthetic leather in black.Made after the originals from the early 70s.Upholstery with foam under imitation leather.Distance saddle clamp - sissybar mounting: approx. 28 cm - 31.5 cm with turned saddle clampSize: approx. 45.5 cm long and 14 cm wideThe saddle also fits on the original Krates and Bonanza of the 70s.
Sticker / Decal Set for Custom Frames with different Logos not only for PG Bikes
black and white
dimensions: about 400 x 190 mm (~15,75 x 7,48 inches)
classic lady
StreamLiner
SmyStar
Sweeper
Street
Bonnie
Board Tracker
Chain Cover Original ELECTRA Amsterdam black
painted steel with sticker
dimensions: ~ 735 x 210 mm (~28,94 x 8,27 inches)
Front hole outer side: diameter ~105 mm ( ~ 4 ,13 inch)
Front hole inner side: diameter ~ 34,5 mm ( ~ 1,35 inch)
Overall diameter: ~200 mm ( ~ 7,87 inch)
Overall diameter for the sproket ~ 127 mm ( ~ 5 inch)
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm (~0,87 inches) shaft
170 mm (~6,69 inches) shaft height
100 mm (~3,94 inches) nosing with 45° angle
Using a single bolt mount won't recommend handle bars with big hights.
Stem Steel black sand. Humpert Ergotec CV 101
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,90 inches) shaft height
60 mm (~2,36 inches) nosing with 15° angle
Using a single bolt mount won't recommend handle bars with big hights.
Seat Post Clamp 34.9 mm (~1,37 inches) Alu black
Colour: black
Material: aluminium
Inner diameter: 34.9 mm (~1,37 inches)
Details: with quick release
Mounting position: mounting on the seat tube
Original Item from Urban Drivesytle Berlin
Stem Steel Black Humpert Ergotec CV 100
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black steel
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm shaft (~0,87 inches)
170 mm (~6,69 inches) shaft height
80 mm (~3,15 inches) nosing with 25° angle
Using a single bolt mount won't recommend handle bars with big hights.
Stem Steel Black Humpert Ergotec CV 101
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black steel
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm (~0,87 inches) shaft
150 mm (~5,90 inches) shaft height
80 mm (~3,15 inches) nosing with 25° angle
Using a single bolt mount won't recommend handle bars with big hights.
T-shirt dark gray
with PimpGarage TM on the chest
Your size: L
The T-shirts are produced very high quality and in best condition.
The T-shirts are from the insolvency of PimpGarage TM Custombikes GmbH.
The original price of the T-shirts was € 29.99
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm (~0,87 inches) shaft
150 mm (~5,90 inches) shaft height
110 mm (~4,33 inches) nosing with 45° angle
Using a single bolt mount won't recommend handle bars with big hights.
Seat Post Clamp 35 mm (~1,37 inches) Alu matt black
Product details:
Colour: matt black
Material: aluminium
Inner diameter: 35 mm (~1,37 inches)
Details: with Allen screws
Mounting position: mounting on the seat tube
Original accessories from Urban Drivestyle Berlin!
Chain Cover Original ELECTRA Butterfly
painted with sticker
dimensions: ~ 600 x 125 mm (~23,62 inches)
distance between oblong holes: about 388 - 410 mm (~15,27 - 16,14 inches)
Longsleeve-Shirt "PG", ivory
with PimpGarageTM imprint on the right sleeve and big crown logo on the back
high quality cotton
please choose Your size:
S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 34,99 !!!
Longsleeve-Shirt "PG", light grey
with PimpGarageTM imprint on the right sleeve and big crown logo on the back
high quality cotton
please choose Your size:
S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 34,99 !!!
Seat Post Clamp 35 mm (~1,37 inches) Alu matt glossy
Product details:
Colour: matt glossy
Material: aluminium
Inner diameter: 35 mm (~1,37 inches)
Details: with Allen screws
Mounting position: mounting on the seat tube
Original accessories from Urban Drivestyle Berlin!
T-Shirt "PG", ivory
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
T-Shirt "PG", ivory
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Stem Steel black Humpert Ergotec CV 101
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,90 inches) shaft height
60 mm (~2,36 inches) nosing with 15° angle
Using a single bolt mount won't recommend handle bars with big hights.
Stem Steel Black Humpert Ergotec CV 100
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black steel
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,91 inches) shaft height
100 mm (~3,94 inches) nosing with 40° angle
Using a single bolt mount won't recommend handle bars with big hights.
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm (~0,87 inches) shaft
170 mm (~6,69 inches) shaft height
80 mm (~3,15 inches) nosing with 45° angle
.Using a single bolt mount won't recommend handle bars with big hights
T-shirt light gray
with imprint "PimpGarageTM" on the left chest
and dancing girl on her back
Please choose your size: S, M, L, XL
The T-shirts are produced very high quality and in best condition.
The T-shirts are from the insolvency of PimpGarage TM Custombikes GmbH.
The original price of the T-shirts was € 29.99
T-Shirt "PG" GoGo, red
with PimpGarageTM imprint on the front and dancing girl on the back
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
T-Shirt "PG", green
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Seat Post Clamp 34.9 mm (~1,37 inches) Alu silver
Colour: silver
Material: aluminium
Inner diameter: 34.9 mm (~1,37 inches)
Details: with Allen screws
Mounting position: mounting on the seat tube
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
180 mm (~7,09 inches) shaft height
110 mm (~4,33 inches) nosing with 45° angle
Using a single bolt mount won't recommend handle bars with big hights.
T-shirt dark gray
with PimpGarage TM on the chest
Your size: M
The T-shirts are produced very high quality and in best condition.
The T-shirts are from the insolvency of PimpGarage TM Custombikes GmbH.
The original price of the T-shirts was € 29.99
ELECTRA Rally Sport original Front Fender 26" metallic green
26"
NOS
painted with white Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Front fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 400 mm (~15.75 inches)
Diameter inside: ~ 305 mm (~ 12.01 inches)
Diameter outside: ~ 380 mm (~ 14.96 inches)
ELECTRA Rally Sport original Rear Fender 26" mettalic green
26"
NOS
painted with white Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
ELECTRA Betty original Front Fender matt white/black
for 24 x 3.0 tyres
NOS
painted with with grey/red flames
without fixing material and Stays
Scope of delivery: 1 Front Fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 730 mm (~ 28.74 inches)
Diameter inside: ~ 520 mm (~ 20.47 inches)
Diameter outside: ~ 595 mm (~ 23.43 inches)
ELECTRA Indy original Rear Fender 26" red
26"
NOS
painted with black/golden stripes
May contain storage marks
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 1220 mm (~48.03 inches)
Diameter inside: ~ 660 mm (~ 25.98 inches)
Diameter outside: ~ 710 mm (~ 27.95 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
Chain Cover Original ELECTRA fire red
painted with sticker
for 16 inch Kidsbikes
dimensions: ~ 305 x 120 mm (~12 x 4,72 inches)
distance between oblong holes: about 215 - 228 mm (~8,46 - 8,98 inches)
Chain Cover Original ELECTRA Amsterdam copper
painted with sticker
dimensions: ~ 735 x 210 mm (~28,94 x 8,27 inches)
Front hole outer side: diameter ~105 mm ( ~ 4 ,13 inch)
Front hole inner side: diameter ~ 34,5 mm ( ~ 1,35 inch)
Overall diameter: ~200 mm ( ~ 7,87 inch)
Overall diameter for the sproket ~ 127 mm ( ~ 5 inch)
€24.95*
This website uses cookies to ensure the best experience possible. More information...