Tire Street Hog 26 x 2.35, black white wall without black lettering
Semi Slick Tire
thick and strong!
the ultimate nostalgia custom cruiser hot rod tire!
40-65 PSI
about 65 mm wide on a 56 mm rim
about 57 mm wide on a 39 mm rim
Overall diameter, depending on rim width and air pressure about: 65 cm + / - 2 cm Weight: 1.15 kg
This tire fits on all 26" Classic Cycle rims up to 67 mm width!
But please check frame/fork for clearance!
Please be aware that
If you assemble the tire on wide rims not to put more pressure than 20 PSI
Tire Kenda Kraze 26 x 3.0
68-559
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 80 mm (~3,15 inches) silver rim as shown it is 82 mm (~3,23 inches) wide and 66 mm (~2,60 inches) high (above the rim).
On 39 mm (~1,53 inches) rim about 67 mm (~2,64 inches) wide and 62 mm (~2,44 inches) high (above the rim)
This tire fits rims of widths 30 mm (~1,18 inces) to 82 mm (~3,23 inches) width!
If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 1260 g (~2,78 pounds)
30 TPI
Offset Chain Ring Classic Cycle
1 cm (~0,69 inches) Offset
cool offset chain wheel for "one piece crank"
For Chains of 1/2 x 1/8
Helps to bring the chain 1 cm (~0,69 inches) off the line not to touch the tire
Diameter of the bolt circle is of standard 130 mm (~5,12 inches)
Kickstand, from 20 - 29 inch.
alu, black
integrated spring
for chain strut
height from 28 cm to 37,5 cm (~11,02 to 14,76 inches)
Can be shortened further on with little technical efforts
Buffalo V Handlebar black
For the Sting-Ray or similar cult bikes of the 60s and 70s.
black steel
dimensions: about 680 x 330 mm (~26,77 x 12,99 inches)
for 22,2 mm (~0,87 inches) stems
Tire Kenda Kraze 20 x 3.0
68-406
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 82 mm (~3,23 inches) rim it is ~ 80 mm (~3,15 inches) wide and ~ 60 mm (~2,36 inches) high (above the rim).
On 58 mm (~2,28 inches) rim as shown about 74 mm (~2,91 inches) wide and 60 mm (~2,36 inches) high (above the rim)
This tire fits rims of widths 30 mm (~1,18 inces) to 82 mm (~3,23 inches) width!
If you assemble these tire on wide rims not to put more pressure than 40 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 890g (~ 1,96 pounds)
60 TPI
Beaded Edge Tire 28 x 1 1/2 Colour: Brick Red
Outstanding quality, fits on Your oldtimer bicycle with suitable beaded edge rims.
28 x 1 1/2 beaded edge tyre is the perfect alternative for the wider 28 x 1,70 x 1 1/2 which is no longer available.
1 piece
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth black
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Outer Cable Housing Black, for Shifter 10 cm (~3,94 inches)
For shifter
Sold by 10 cm (~3,94 inches)
0,49 Euro per 10 cm (~3,94 inches)
how to order:
100 cm (~3,94 inches) needed = 10 x 10 cm (~3,94 inches) = please order 10 pieces
when 150 cm (~59,05 inches) needed = 15 x 10 cm (~3,94 inches) = please order 15 pieces
without endcap
Compatible with all inner wire of 1.1 - 1.6 mm (~0,04 - 0,06 inches) including Shimano, XLC Jagwire, ...
140 Spokes 20 inch. Wheel Set, chrome-plated
Diameter: 406
20 x 2.125
ETRTO: 32-406
front and rear wheel with coaster brake
chrome-plated steel
rim width: 32 mm (~1,26 inches)
inner width: 29 mm (~1,14 inches)
Installation dimension of the hubs approx.: Front: 100 mm
Rear: 110 mm
140 spokes
The ultimate wheels for the hot rod custom cruiser freak! Please check frame/fork for clearance!
Tire thickslick 26 x 2.0 black
26 x 2.0
50 x 559
The ThickSlick is a extrem durable tire designed for the Urban-Ride. Super compfortable, perfect grip and a really low role resistance. 2 times the puncture resistance of a standard Road tire
Clincher Tire 26 x 2.0
Width: 50 mm (~1,97 inches) - allready shown on a 80 mm rim but we don't have any feedback of it. Durastrip: Anti puncture cevlar band Presure: 4.5 - 7.6 bar with standard rims. On wide rims as low as possible. If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.
suitable for 559 mm (~22 inches) diameter rims
pure black with white thickslick printing
Weight: 630 gr. (~1,39 pounds)
Tire Street Hog 24 x 3.0 Black without white lettering
75 - 507
semi slick
big and strong tire
for up to 40 PSI pressure
inflated about 75 mm (~2,95 inches) wide
Overall diameter, depending on rim width and air pressure about: 63 cm + / - 2 cm (~24,8 +/- 0,79 inches)
Weight: 1.5 kg (~3,31 pounds)
This tire fits on all 24" Classic Cycle rims up to 82 mm (3,23 inch) width!
But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 22 PSI. It could blast.
Fat Bike Tire Classic Cycle Fleetwood 26 x 4.0
100-559
30 TPI = Sturdy and strong!
Intensive tread knob layout offers excellent traction and gripping power
Shoulder tread knobs connecting design enhances comering grip power and stability
About 87 mm (~3,42 inches) wide on a 80 mm (~3,15 inches) rim.
About 107 mm (~4,12 inches) wide on a 100 mm (~3,94 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The pictures shows the new Fleetwood Tire assembled on a 132 mm (~5,2 inches) wide rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter.
Weight: 1700 g (~3,75 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 Piece
Tube recommendation: 26 x 4.0 tube
Halflink Chain 1/2 x 1/8
silver
116 chain links = 148 cm (~58,27 inches)
No need to change frame and freewheel. The special design oh chain plate, bridge-type roller link is composed of height-uneven chain plates.
We jumpoff the traditional way of chain lenth adjustment from the past, by adjusting pair of links, avoid the difficulty of wasting and unprecise adjustment.
The chain adopts the SCM alloy steel, pass the special DHA heat treament.
Its intention power is up to 1300 kgf, o lot higher strength than general roller chain which have 850 kgf.
Totally accords ISO and JIS industrial standard.
The straight shape design of outside chain plate offers the ability of freestyle bicycle to use the roller chain to collide against any object.
Smooth going instead of beating have more comfortable and safer Assurance to ride persons who take advantage of it.
delivery on headcard
Bottom Bracket Bearing Kit
for One Piece Cranks black
complete bottom bearing kit for one piece cranks
the internal diameter of the bearing shell for the BB lug is: 51,5 mm (~2,03 inches)
Buffalo V Handlebar
For the Sting-Ray or similar cult bikes of the 60s and 70s.
chrome-plated steel
dimensions: about 680 x 330 mm (~26,77 x 12,99 inches)
for 22,2 mm (~0,87 inches) stems
Halflink Chain 1/2 x 1/8
black Teflon painted
116 chain links = 148 cm (~58,27 inches)
No need to change frame and freewheel. The special design oh chain plate, bridge-type roller link is composed of height-uneven chain plates.
We jumpoff the traditional way of chain lenth adjustment from the past, by adjusting pair of links, avoid the difficulty of wasting and unprecise adjustment.
The chain adopts the SCM alloy steel, pass the special DHA heat treament.
Its intention power is up to 1300 kgf, o lot higher strength than general roller chain which have 850 kgf.
Totally accords ISO and JIS industrial standard.
The straight shape design of outside chain plate offers the ability of freestyle bicycle to use the roller chain to collide against any object.
Smooth going instead of beating have more comfortable and safer Assurance to ride persons who take advantage of it.
delivery on headcard
Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0
97/102-559
72 TPI = Lightweight and strong!
max load = 155kg/pc
About 87 mm (~3,42 inches) wide on a 82 mm (~3,22 inches) rim.
About 105 mm (~4,13 inches) wide on a 102 mm (~4,02 inches) rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The last two pictures show the Zig Zag mounted on a 132 mm (~5,2 inches) wide black rim from us.
Attention: In these two pictures the labeling of the tires differs from the actual tires!
Weight: 1620 g (~3,57 pounds)
If you assemble the tire on extra wide rims do not to put more pressure than 16 PSI. It could blast.
1 Piece
Tube recommendation: 26 x 4.0 tube
Zig Zag Fat Hog Tire 26 x 3.0 black white wall
76-559
Zig Zag pattern
About 87 mm (~3,42 inches) wide on a 82 mm (~3,23 inches) rim.
About 103 mm (~4,05 inches) wide on a 102 mm (~4,01 inches) rim.
This tire fits on all 26" Classic Cycle rims from ~ 30 to 102 mm (~1,18 to 4,01 inches) width!
But please check frame/fork for clearance!
The pictures shows the new Fat Hog Tire assembled on a 82 mm (~3,23 inches) wide rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter.
Weight: 1650 g (~3,63 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 Piece
Tube recommendation: 26 x 3.0 tube
Red Tire 28 x 1 1/2 40 x 635 Clay Brick Color
Clay Brick Red Roadster Tire
700 x 35 B
colour: Clay Brick Color red
Very stable quality with vintage block-profile.
40-635 Please check out the exact diameter of the rim! There are also existing 622 mm (~24,49 inches) rims.
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
36
colour:
black
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Item No.: BH41sw
Classic Cycle Cruiser handlebar black
Really modest and cool!!!
We planed to make cruising much more convenient to you and now we can present our new handlebar.
The nice hand position is perfect for comfortable biking and at the same time cool and outstanding. Try it and you will be excited.
Hi-Ten Steel black
73 cm (~28,74 inches) wide
round
for 25,4 cm (~1 inch) Stems
Raise max. 24 cm (~9,45 inches)
Diameter of bar is 22,2 mm (~0,87 inches).
Also available in chrome Item No.: BH41
Board Tracker Saddle black with black diamand seams
Finally in stock: Very cool saddle in board tracker style
High quality, Steel base with steel rail for the clamp or pantent post.
Material: Artificial leather, steel, foam
Size: 33,5 x 25.5 cm x 9 cm (~13,2 x 10 x 3,6 inches)
with saddle clamp
Weight: ~ 1710 g (~3,77 pounds)
black with black seams
Aluminium Alloy Rim 26 inch., 67 mm (~2,64 inches) wide, double wall
ETRTO: 559
double wall 67
the ultimate ultra fat custom chopper wheel
67 mm wide, inner size: 60 mm, 36 holes
colour: black
Rim diameter for calculating the spoke length: 539 mm
Weight: 1220 g
for all 26 inch Classic Cycle tires
But please check frame/fork for clearance!
Innovative and beautiful mini bell made of copper
very loud and long lasting sound (100dB)
body made of copper
diameter 30 mm / 1,18 inch
innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter
weight 48 g / 0,11 pounds
incl. rubber inlay
colour black
For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.
204 E-Speedster Whitewall Extra Wide Tire 20 x 4
The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air
102 - 406
26 TPI
Edurance Compound
E-Bike 50, ECE - R75
8-20 PSI (0.6 - 1,4 bar)
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim.
Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure.
Weight: ~ 1,4 kg (~2,6 pounds)
If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.
This offer includes 1 piece only
Street King Redwall Balloon Cruiser Tire
26 x 2.125
57 x 559
cool custom redwall tire for the ultimate look!
width of inflated tire: 55 mm (~2,16 inches) on 30 mm (~1,18 inches) Rim
63 mm (~2,48 inches) on 56 mm (~2,20 inches) rim
This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95) inches width!
But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 30 PSI
Alu Hub, Bolt on, silver for front wheel for Disc Brake
Sealed bearings
Mounting size: 100 mm (~3,94 inches)
Flange width: 58 mm (~2,28 inches)
Axle Length: 155 mm (~6,10 inches)
Pitch Circle Diameter: 58 mm (~2,28 inches)
Spoke Holes: 36 Holes 14G = 2 mm (~0,08 inches) Spokes
Weight: ~ 335 g (~0,73 pounds)
Bolt on. NO quick release!!
Chain tensioner Alu 10 mm axle
for 3/8"
niro alloy
Dimensionen:
axle: 10 mm (~0,39 inches)
Head width: 26 mm (~1,02 inches)
Total Leght: 51 mm (~2 inches)
Distance between mid of axle position till stop / position of screws : 13 mm (~0,51 inches)
Screw: 32 mm (~1,26 inches) long, M4
1 Piece
Aluminium Alloy Rim 20 inch., 46 mm (~1,81 inches) wide black matte
ETRTO: 406
double wall 46
Wide:
46 mm (~1,82 inches)
inner size:
39 mm (~1,53 inches)
Holes:
36
colour:
black matte
Rim diameter for calculating the spoke length:
376 mm (~14,80 inches)
eight:
610 g (~1,34 pounds)
Halflink Chain 1/2 x 1/8
GOLD Teflon painted
116 chain links = 148 cm (~58,27 inches)
No need to change frame and freewheel. The special design oh chain plate, bridge-type roller link is composed of height-uneven chain plates.
We jumpoff the traditional way of chain lenth adjustment from the past, by adjusting pair of links, avoid the difficulty of wasting and unprecise adjustment.
The chain adopts the SCM alloy steel, pass the special DHA heat treament.
Its intention power is up to 1300 kgf, o lot higher strength than general roller chain which have 850 kgf.
Totally accords ISO and JIS industrial standard.
The straight shape design of outside chain plate offers the ability of freestyle bicycle to use the roller chain to collide against any object.
Smooth going instead of beating have more comfortable and safer Assurance to ride persons who take advantage of it.
delivery on headcard
Saddle for Foldingbikes of the 70s, black
comfortable black saddle
Zinc plated lower frame with two pressure springs
classic look with chrome-plated rivets on the side
240 x 210 mm (~9,45 x 8,27 inches)
800 gr. (~1,76 pounds)
Stem with 22,2 mm (~0,87 inches) shaft
black aluminium, with CP steel stem shaft
4 Screws
handlebar acceptance 22,2 mm (~0,87 inches)
65 mm (~2,56 inches) max. height / 35 mm (~1,38 inches) nosing
204 Vee Rubber E-Speedster Extra Wide Tire 20 x 4
The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air
102 - 406
26 TPI
Edurance Compound
E-Bike 50, ECE - R75
8-20 PSI (0.6 - 1,4 bar)
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim.
Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure.
Weight: ~ 1,2 kg (~2,6 pounds)
If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.
This offer includes 1 piece only
Tire Kenda Kraze 24 x 3.0
68-507
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 102 mm (~4,01 inches) rim as shown it is 95 mm (~3,74 inches) wide and 62 mm (~2,44 inches) high (above the rim).
On 46 mm (~1,8 inches) rim about 70 mm (~ 2,75 inches) wide and 62 mm (~2,44 inches) high (above the rim)
This tire fits 24" rims of widths 25 mm (~0,98 inces) to 102 mm (~4,01 inches) width!
If you assemble the tire on wide rims not to put more pressure than 40 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 1100 g (2,42~ pounds)
60 TPI
Tire Beach Bum 26 x 2.125 whitewall
Very cool and beautiful tire from well-known and high quality production.
Mounted here on our 26 mm (~1,03 inches) wide magnesium rim and on our 57 mm (~2,24 inches) black alu rim.
Total diameter assembled depending on the pressure and rim width.Total diameter on a 26 mm ( ~ 1,03 inches) rim: ~ 670 mm ( ~ 26,38 inches)Total diameter on a 57 mm ( ~ 2,24 inches) rim: ~ 660 mm ( ~ 25,98 inches)
57 - 559
26 x 2.125
210 - 350 kPa
2.1 - 3.5.Bar
30 - 50 PSI
1 kg (~ 2,2 pounds)
Do not inflate the tire more than 1.0 bar on wide rims. There is a risk that the flank wire will tear (applies to all tires on extra-wide rims).
Cruiser Moon Handlebar, black
Hi-Ten steel, black
Width 695 mm (~27,36 inches)
Raise: 100 mm (~3,94 inches)
Depth: 300 mm (~11,81 inches)
for 25.4 mm (~1 inch) stems
old style cruising will never die!
Wooden Grips Classic
Mahagony
These beautiful handlebar grips made - - from real wood look on your bike look great and with class.
The clamping rings are fixed with screws enabling perfect fitting
Innovative screw / clamp system
Suitable for handlebars with 22.2 mm (~0,87 inches) diameter
Material: Mahagony hard wood natural, clear lacquered
with end caps made of plastic
Length: 135 mm (~5,31 inches)
Weight: 120 gr. (~0,26 pounds)
1 Pair
Apehanger Handlebar
black steel
dimensions: about 1000 x 635 mm (~39,37 x 25 inches)
for 22,2 mm (~0,87 inches) stems
the ultimate cruiser chopper apehanger!