Fender Set 24 / 26 inches with stays, 100 mm (~3,94 inches) width
100 mm (~3,94 inches) wide, 24 / 26 inch., raw
Fits great for 24 x 3.0 and 26 x 2.35 tires
Complete fender set for cruisers or similar bike types.
Width: 100 mm (~3,94 inches)
Hight: 35 mm (~1,38 inches)
Rear lenght in circumference: ~ 1135 mm (~44,69 inches)
Front length in circumference: ~ 730 mm (~28,74 inches)
Rear inside diameter: ~ 640 mm (~25,20 inches)
Rear outside diameter: ~ 705 mm ( ~27,8 inches)
Steel, raw
Weight: ca. 950 g (~2,1 pounds)
Old School Dress Guard / Skirt Protectors, black-white, fabric covered Rubber
new, one pair,
black and white
30 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Universal holder angle for lamp or fender, steel, black
Holder at 90° angle
leg length ~ 34 mm and ~ 20 mm
hole diameter ~ 6 mm
Material: steel
Black anodized
Fender Set 26 inch. with Fender Skirts, stainless steel
steel fender set for 26 inch. bikes, stainless, incl. fender struts
the ultimate fender set for nostalgia old school hot rod freaks!
for cruisers or similar bike types
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
length front: about 775 mm (~30,51 inches)
length rear: about 1220 mm (~48,31 inches)
Inside diameter: approx. 675 mm (~26,57 inches)
Outside diameter: approx. 730 mm (~28,74 inches)
Fender Set 26 inch., Shorty, with Fender Skirts, black
fender set for 26 inch. bikes, black
the ultimate fender set for nostalgia old school hot rod freaks!
for cruisers or similar bike types
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
length front: about 505 mm (~19,88 inches)
length rear: about 710 mm (~27,95 inches)
Inside diameter: approx. 515 mm (~20,27 inches)
Outside diameter: approx. 595 mm (~23,42 inches)
On chainside of the rear fender you will find a benting to give way to the chain.
Fender Set 26 inch. 80 mm with Ducktails, chrome plated steel
fender set for 26 inch. bikes, chrome plated steel, with fender struts
for cruisers or similar bike types
width: 80 mm
height: 26 mm
length front: ~ 775 mm
length rear: ~ 1220 mm
On chainside of the rear fender you will find a benting to give way to the chain.
ALU Cruiser Fender Set 26 inch. 80 mm (~3,15 inches), silver laquered glossy
Essential Alloy
fender set for 26 inch. bikes, silver coloured, with fender stays and quality screws and bolts
for cruisers or similar bike types
silver coloured, glossy finish
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
Length front: 810 mm (~31,89 inches)
Length rear: 1160 mm (~45,67 inches)
Inside diameter: approx. 665 mm (~26,18 inches)
Outside diameter: approx. 720 mm (~28,35 inches)
Distance between rear frame clip and assembling point behind the botton bracket shell: 340-370 mm (~13,39 - 14,57 inches)
2 Fenderstays for front fork assembling holder
2 Fenderstays two different lentgth for rear frame holder
The medium stay is for horizontal use with rear fender.
The shortest stay is for vertical use with rear fender.
On the chain side of the rear fender is a bent to enable the funktion of the chain
Original offered for Cruiser with 26" wheels
Old School Dress Guard / Skirt Protectors, red-white, fabric covered Rubber
new, one pair,
red and white
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
BR02 universal holder for lamp or mudguard / fender
90 ° angle with 3 holes
Leg length ~ 35 mm / 1,34 inch and ~ 26 mm /1,02 inch
Hole diameter ~ 5 mm / 0,2 inch and 8,5 mm /0,334 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
Classic Fender Set 28 inch, black
fender set for 28 inch. bikes, black, incl. fender struts and assembling parts
for Bicycles from the 30s till 60s, Dutch Types or similar
Historical pattern
Complete Set front and rear
Glossy black
width: 57 mm (~2,24 inches)
height: 25 mm (~0,98 inches)
Inside diameter: approx. 720 mm (~28,34 inches)
Outside diameter: approx. 775 mm (~30,51 inches)
On chainside of the rear fender you will find a ben ting to give way to the chain.
weight: ~ 880 g / 1,94 lbs
Fender Set 26 inch. with Fender Skirts, black
fender set for 26 inch. bikes, black, incl. fender struts
the ultimate fender set for nostalgia old school hot rod freaks!
for cruisers or similar bike types
width: 80 mm
height: 26 mm
length front: about 775 mm
length rear: about 1220 mm
Inside diameter: approx. 680 mm
Outside diameter: approx. 740 mm
total weight fenderset: ~1,8 kg
On chainside of the rear fender you will find a benting to give way to the chain.
Fender Set 26 inch., Shorty, with Fender Skirts, stainless steel
fender set for 26 inch. bikes, stainless
the ultimate fender set for nostalgia old school hot rod freaks!
for cruisers or similar bike types
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
length front: about 505 mm (~19,88 inches)
length rear: about 710 mm (~27,95 inches)
Inside diameter: approx. 515 mm (~20,75 inches)
Outside diameter: approx. 595 mm (~23,42 inches)
Classic Fender Set steel 28 inch, black, Luxury
fender set for 28 inch. bikes, black, incl. fender struts and assembling parts
for Bicycles from the 30s till 60s, Dutch Types or similar
Historical pattern made out of steel
Complete Set front and rear
Glossy black
With fender nose and rear bumper
width: 58 mm (~2,28 inches)
height: 22 mm (~0,87 inches)
Inside diameter: approx. 720 mm (~28,35 inches)
Outside diameter: approx. 770 mm (~30,31 inches)
Fender stays / struts to mount on axle
weight: ~ 950 gr. (~2,09 pounds)
Fender Set 24 / 26 inches with stays, 100 mm (~3,94 inches) width
100 mm (~3,94 inches) wide, 24 / 26 inch., satin black
Fits great for 24 x 3.0 and 26 x 2.35 tires.
Complete fender set for cruisers or similar bike types.
Width: 100 mm (~3,94 inches)
Hight: 35 mm (~1,38 inches)
Rear lenght in circumference: ~ 1135 mm (~44,69 inches)
Front length in circumference: ~ 730 mm (~28,74 inches)
Rear inside diameter: ~ 640 mm (~25,20 inches)
Rear outside diameter: ~ 705 mm ( ~27,8 inches)
Material: steel
Weight: ca. 950 g (~2,1 pounds)
Stainless Steel Fender Slide
polished steel, partly made out of stainless steel
with 2 threads, washers and nuts
rounded
for the authentic nostalgia look!
Dimensions: ~ 127 x 38 mm (~5 x 1,5 inches)
Fender Set 26 inch. with Ducktails and Fender Stays 100
100 mm (~3,94 inches) wide, 26 inch., chrome-plated with ducktails
complete fender set for cruisers or similar bike types
fits for example the original Schwinn Black Phantom and also our springer fork types (#260)
Width: 100 mm (~3,94 inches)
Hight: 37 mm (~1,46 inches)
Diameter: ~ 650 mm (~25,59 inches)
Lenght in circumference: ~1160 mm (~45,67 inches)
Inside diameter: approx. 650 mm (~25,59 inches)
Outside diameter: approx. 730 mm (~28,74 inches)
On chainside of the rear fender you will find a benting to give way to the chain.
polished steel partly made out of stainless steelwith 2 threads, washers and nutscorneredfor the authentic nostalgia look!Dimensions: ~ 120 x 40 mm (~4,72 x 1,57 inches)
Old School Dress Guard / Skirt Protectors, gray, reflective, fabric covered Rubber
new, one pair,
gray
reflective
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
BR01 universal holder for lamp or mudguard / fender
90 ° angle with a slightly cranked leg.
Leg length ~ 35 mm / 1,34 inch
Hole diameter ~ 5 mm / 0,2 inch
Distance from the center of the hole to the center of the hole , cranked leg ~ 22 mm / 0,86 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
Itemnr: 244
Short Fender Set 26 inch., with Ducktails, stainless steel
the ultimate nostalgia old school hot rod fenders for your cruiser !!!
short version
superwide, stainless steel, with ducktails
good quality
comes with mounting hardware
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
length: front fender 505 mm (~19,88 inches), rear fender 710 mm (~27,95 inches)
Inside diameter: approx. 515 mm (~20,27 inches)
Outside diameter: approx. 600 mm (~23,62 inches)
On chainside of the rear fender you will find a benting to give way to the chain
Fender Stays, 26 inch.
stainless steel one piece
for 80 mm (~3,15 inches) wide fenders
for axle mounting and 80 mm wide platesOverall length: approx. 370 mmmSlot for axle: ~15 x 10 mmMounting holes to mudguard: ~ 5 mm / slotted hole: ~ 20 x 5 mmDistance from axle mount centre to mounting hole to mudguard: ~ 355 mm
Fender Ornament Tiger Puppy
Quality Made in Germany by Bullyland
about 50 mm (~1,97 inches) high figure for fender mounting
(screw not included)
BULLY 63579 Tiger-Junges, braun
Chain Cover Original ELECTRA Amsterdam black
painted steel with sticker
dimensions: ~ 735 x 210 mm (~28,94 x 8,27 inches)
Front hole outer side: diameter ~105 mm ( ~ 4 ,13 inch)
Front hole inner side: diameter ~ 34,5 mm ( ~ 1,35 inch)
Overall diameter: ~200 mm ( ~ 7,87 inch)
Overall diameter for the sproket ~ 127 mm ( ~ 5 inch)
Old School Dress Guard / Skirt Protectors, black-red, fabric covered Rubber
new, one pair,
black and red
30 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Fender Stays 45-50 mm (~1,77 - 1,97 inches) for wide Fenders
Chrome plated
one piece
for 45-50 mm (~1,77 - 1,97 inches) wide fenders
Total length: 370 mm (~14,57 inches)
Fender Set 28 inch., with Ducktails, chrome
New and exclusive on the german market !!!
fender set with stays and mounting hardware for cruisers or else
28 inch., chrome-plated with ducktails
dimensions: 80 mm (~3,15 inches) wide and 26 mm (~1,02 inches) high
Inside diameter: approx. 720 mm (~28,35 inches)Outside diameter: approx. 780 mm (~30,71 inches)
measurements taken with a tailors tape measure:
length of the back fender: 1200 mm (~47,24 inches) (middle oblong hole to fender end)
length of the front fender: 780 mm (~30,71 inches)
length of the stays: 385 mm (~ 15,16 inches) (middle axle hole to max. height)
Dimension: 80 mm x 26 mm (~3,15 x 1,02 inches)
On chainside of the rear fender you will find a benting to give way to the chain.
Fender Stays 55-60 mm (~2,16 - 2,36 inches) wide
Chrome plated
one piece
for 55-60 mm (~2,16 - 2,36 inches) wide fenders
Total length: 380 mm (~14,96 inches)
Ø 4,5 mm (~0,18 inches)
Old School Dress Guard / Skirt Protectors, blue-red, fabric covered Rubber
new, one pair,
blue-red
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
UD bolt accessory set for mudguards
Suitable for mounting mudguards with overflow brace!
The screw set was originally used to attach the Urban Drivestye mudguards 20x4 inch for UNI Fatbike, but can also be used for other models.
Universal holder angle for lamp or fender, stainless steel
Holder at 90° angle
leg length ~ 23 mm and ~ 15 mm
hole diameter ~ 10 mm and ~ 6 mm
Material: stainless steel
Fender Stays 55-60 mm (~2,16 - 2,36 inches) wide
Chrome plated
one piece
for 55-60 mm (~2,16 - 2,36 inches) wide fenders
Total length: 370 mm (~14,57 inches)
Ø 4 mm (0,16 inches)
Fender Set 24 / 26 inches with stays, 100 mm (~3,94 inches) width
100 mm (~3,94 inches) wide, 24 / 26 inch., chrome plated
Fits great for 24 x 3.0 and 26 x 2.35 tires
Complete fender set for cruisers or similar bike types.
Width: 100 mm (~3,94 inches)
Hight: 35 mm (~1,38 inches)
Rear lenght in circumference: ~ 1135 mm (~44,69 inches)
Front length in circumference: ~ 730 mm (~28,74 inches)
Rear inside diameter: ~ 640 mm (~25,20 inches)
Rear outside diameter: ~ 705 mm ( ~27,8 inches)
Steel, chrome plated
Weight: ca. 950 g (~2,1 pounds)
Chain Cover Original ELECTRA Butterfly
painted with sticker
dimensions: ~ 600 x 125 mm (~23,62 inches)
distance between oblong holes: about 388 - 410 mm (~15,27 - 16,14 inches)
Old School Dress Guard / Skirt Protectors, grey, fabric covered Rubber
new, one pair,
grey
28 hooke chainside, 30 hooks other side
for 26 and 28 inch. frames
New and fresh production from Europe
Classic Fender Set steel 28 inch black, with holes for dress guard
fender set for 28 inch. bikes, black, incl. wire struts and assembling parts
for Bicycles from the 30s till 50s, Dutch Types or similar
Historical pattern made out of steel
Complete Set front and rear
Glossy black
width: 58 mm (~2,28 inches)
height: 22 mm (~0,87 inches)
Inside diameter: approx. 710 mm (~27,95 inches)
Outside diameter: approx. 760 mm (~29,92 inches)
Rear fender with 60 holes for dress guards (30 holes per side)
Fender stays / wire to mount on axle
weight: ~ 900 gr. (~1,98 pounds)
Urban Drivestyle fender strut set for 20 inch fatbike
Mudguard struts, overflowing (2 pieces)
bolts and bracket set
for 20 x 4 inch
Material thickness: ~ 4 mm
Inner width: ~ 135 mm
Length of straight strut - measured vertically from apex to center mounting hole: ~ 300 mm - mounting holes oblong hole: ~ 13 x 7 mm
Length of the cranked strut - measured vertically from the apex to the center of the mounting hole: ~ 290 mm Mounting holes ~ 6 mm
Original accessories Urban Drivestyle for e.g. the Moke, Swing or Bobber
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note dimensions
Urban Drivestyle mudguard stay for 20 inch fatbike
Mudguard strut, overflowing (1 piece)
Bolts, screws and bracket set
for 20 x 4 inch
Material thickness: ~ 4 mm / 0,157 inches
Inner width: ~ 135 mm / 5,35 inches
Length of straight strut - measured vertically from apex to centre of mounting hole: ~ 280 mm / 11,02 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
Fender Set 26 inch. with Ducktails, black glossy laquered
fender set for 26 inch. bikes, black, incl. fender struts
for cruisers or similar bike types
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
Inside diameter: approx. 650 mm
Outside diameter: approx. 700 mm
Fender Stays Wave
The stay for your cruiser!
You can mount two pieces on one side (see picture) or use one piece only for one side.
Fit for the articles with the numbers: 220x, 221, 222, 223x, 224, 243, 244, 519, 1223, 385204
Color: Silver anodized
Material: Aluminum
Includes: 1 pair
Without mounting material!
Distance between the axle mount and the mounting hole for the mudguard: ~ 35 cm / 13,78 inch
Distance between mounting holes mudguards: ~ 9.5 cm / 3,74 inch
Urban Drivestyle mudguard stay for 20 inch fatbike
Mudguard strut, overflowing (1 piece)
for 20 x 4 inch
Material thickness: ~ 4 mm / 0,157 inches
Inner width: ~ 135 mm / 5,35 inches
Length of straight strut - measured vertically from apex to centre of mounting hole: ~ 280 mm / 11,02 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
Urban Drivestyle mudguard stay cranked for 20 inch fatbike
Mudguard strut, overflowing (1 piece)
for 20 x 4 inch
Material thickness: ~ 4 mm / 0,157 inches
Inner width: ~ 135 mm / 5,35 inches
Length of cranked strut - measured vertically from apex to centre of mounting hole: ~ 290 mm / 11,41 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
€4.99*
This website uses cookies to ensure the best experience possible. More information...