Alu Front light holder / clip Outsider
Of course, this high-quality lamp holder, from the Outsider series, can also be used for other frames and lamp models.
Diameter inside: ~ 3.4 cm (~1,34 inches)
Diameter outside: ~ 4,15 cm (~1,63 inches)
Length: ~10,3 cm (~4,05 inches)
Material: aluminum
Color: black
with Allen screw
1 piece included in delivery
Retro Style for Greaser and Outsider with paint defect according to picture
Diameter: ~ 160 mm (~6,30 inches)
depth: ~ 140 mm (~5,51 inches)
metal case
The power connection is located in the case and can be easily reached through a large opening.
Voltage : 9V – 85V
with E4 mark (tested by a European authority and given EC approval)
Top quality
the lamp can be used within a e-bike cable harness and has the typical plugs
BR02 universal holder for lamp or mudguard / fender
90 ° angle with 3 holes
Leg length ~ 35 mm / 1,34 inch and ~ 26 mm /1,02 inch
Hole diameter ~ 5 mm / 0,2 inch and 8,5 mm /0,334 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
H4 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H4 socket allows you to use car or motorbike headlight bulbs like this H4 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H4 LED
Standard H4 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
Headlight Retro LED Black / Chrome 4 LUX*
white LED
On/Off-Switsch
with 2 batteries LR 06 (AA)
100 hours operating time
heavy duty plastic housing
diameter 75 mm (~2,95 inches)
90 mm (~3,54 inches) length
Black / Chrome
Articles marked with* are not made for puplic use according to the german StVZO. (ONLY important for buyers from GERMANY!)
Battery - Headlight*
swivel mounted
with 55 mm (~2,16 inches) pane and switch, simple quality
plastic, black
dimensions: 80 x 145 x 40 mm (~3,15 x 5,71 x 1,57 inches)
for 2 mono (LR 20) batteries (not included)
headset clip must be ordered seperately (not included)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in black
Retroreflector integrated into holder with K-approval
Fork mounting interface
For further data, please see the datasheet below.
Mini Reflector, orange*
1 piece with thread and nut
diameter: about 27 mm (~1,06 inches)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Mirror Mount CNC 22mm/ M10 right-hand thread - black
Quality mirror clip for hanlde bars form VICMA
Diameter inside: ~ 22 mm
Tread: M10
Material: aluminum
Color: black
with 2 Allen screws
1 piece included in delivery
H4 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H4 socket allows you to use car or motorbike headlight bulbs like this H4 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H4 LED
Standard H4 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
Retro Style Front Light for Greaser and Outsider
Diameter: ~ 160 mm (~6,3 inches)
depth: ~ 140 mm (~5,51 inches)
Metal case chromed
The power connection is located in the case and can be easily accessed through a large opening.
Voltage : 9V – 85V
with E4 mark (tested by a European authority and given EC approval)
Top quality
The lamp can be used within a e-bike cable harness and has the typical plugs
UD Classic Taillight LED 12V for E-Bikes
This classic moped tail light, fits perfectly to the vintage design of your UNI MK!
The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included.
Note:
Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models.
Not compatible with UDX mid-engine version which only has a 6V light output.
Features of the rear light
Material: steel
Power: 2W
Voltage: 12V
Colour: black
Vintage design accentuates UNI MK's moped look
Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage.
Includes: LED tail light, mounting parts
with European approval (E4)
Original accessories from Urban Dirvestyle Berlin!
Classic Cycle Retro LED Battery Frontlamp, 65 mm (~2,56 inches) chrome with Visor
old style, high Quality
Classic retro black lamp with modern LED!
stylish retro LED Lamp
PPS Casing
battery case inside for 4 x battery type AAA
Batteries not included
with On Off switch
3 Modes: High; low, flash
lampsize: 65 mm (~2,56 inches) diamter, 93 mm (~3,66 inches) long (incl. Visor)
Frontreflector within the diffusing screen
8 lux brightness
Materials: Glass polypropylen (PP) Housing plastic (PPS)
Round Reflector, 75 mm* (~2,95 inches)
very nice
with screw thru the middle
red with black plastic frame
diameter: about 75 mm (~2,95 inches)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Skull / Hazard Light or Bike Light White *
NEW !!! white skull / deadhead with white / coloured LED eyes NEW !!!
to be fixed on the handlebar or seat post
integrated switch in nose
crossed bones
dimensions: ~ 31 x 30 mm (~1,22 x1,81 inches)
plastic / gum
Comes with Battery
2 functions: flashing white & flashing with changing colours
Articles marked with* are not made for puplic use according to the german StVZO (ONLY important for buyers from GERMANY!!!).
Rearlight swiveling black
You can switch between parking light, slow flashing or fast flashing
Attachment on seat post, frame etc.
You can use it without bracket with the clip for your jacket etc.
batteries included
Classic Cycle LED 6V Dynamo Frontlamp, 70 mm chrome with Visor
First Quality
Stylish Retro Design
Classic retro chrome lamp with modern LED! One strong LED
stylish retro LED Lamp 10 Lux
PPS Casingmultipe socket with for IN and OUT - eg. rear lightwith
On/Off switch under the lamp
size: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
The lamps meet the requirements for IPX-3 EN / IEC 60529 Light requirements acc DS 708.1 paragraph 3.1 + 3.2 + 3.3. According to section 3.2 within an angel range of + - 80 degrees. The lamps meet the requirements for use on dark road DS 7081 section 3.5 The lights are corrosion-free and water resistant : DS / EN 60068-2-52 The headlamp meets the law on road mimimum skrav for brightness, light distribution and service life. Service life: 15 hours (full brightness) LED Bulb: 1 LED 4,5V-6V 1W, with 10 lux brightnessMaterials: Glass polypropylen (PP) Housing polyamid (PPS)
Bullet Wing Bike Light with Power LED*
Ready for take off!
The Bullet Wing Light uses the ground breaking looks of the Space Age era.Fortunately, the 50s design was adopted and not the technology - the inside was replaced with an ultra bright 1 watt powered LED.
As a highlight: two mounting brackets are included.The Bullet Wing Light can be mounted on either the handlebars or in the classic position on the forks.
1 Watt Power LED
2 light modes: super bright and moderately bright
Splash-proof plastic body in chrome
Approx.12cm x 6cm
Two different brackets included
Requires 4 x AA batteries (not included)
Up to 200 hours light from battery
Visible up to 600m
Tool-free battery change
Articles marked with* are not made for public use according to the german StVZO!
(ONLY important for buyers from GERMANY!!!)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in black
Handlebar bracket interface
For further data, please see the datasheet below.
Big Headlight Motobike, chrome*
170 mm
12 V
H 4 E 4
60/55 W
with integrated visor and four grooves on each side
with integrated parking light
You may use this item with a extra scooter 12 V starterbattery
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Oder No: 712
Mini Reflector, blue*
1 piece with thread and nut
diameter: about 27 mm (~1,06 inches)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Herrmanns LED-Rücklicht-Set für Racktime I-Valo breit
Produktbeschreibung
Das LED-Rücklicht-Set aus dem Hause Herrmanns wurde passen für den Racktime Gepäckträger I-Valo konzipiert. Die schmale Bauweise der LED-Leiste fügt sich optisch hervorragend in das sportliche Design des Gepäckträgers ein. Die Elektronik sitzt gut geschützt im Gehäuse des unterhalb montierten Reflektors.
Herrmans Rücklicht mit 5 leistungsstarken LEDs
Markante und moderne Lichtleiter-Optik
(StVZO zugelassen)
Technische Details:
Standlichtfunktion
Dynamobetrieb
breite Ausführung
Lieferumfang:
1 x LED-Leiste + Reflektor
Spezifikationen:
Farbe:
rot
Beleuchtungstyp:
Rücklicht
Stromquelle:
Seitendynamo, Nabendynamo
Technologie:
LED-Lampe
Merkmale Beleuchtung:
Standlicht
Montageoption:
Gepäckträger
Mini Reflector, green*
1 piece with thread and nut
diameter: about 27 mm (~1,06 inches)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
BR01 universal holder for lamp or mudguard / fender
90 ° angle with a slightly cranked leg.
Leg length ~ 35 mm / 1,34 inch
Hole diameter ~ 5 mm / 0,2 inch
Distance from the center of the hole to the center of the hole , cranked leg ~ 22 mm / 0,86 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
DOT SET
Mini size, maxi effect! The DOT SET is a compact light set with a lot of energy. The set consists of the DOT FRONT and DOT REAR lights.
Highlights
The DOT lights feature a unique 3 dimensional pattern. They offer an optimal solution for quick and affordable safety.
Light source
DOT FRONT : 1 white LED > 10 LumensDOT REAR : 1 red LED > 10 Lumens
Power source
Batteries 2 x CR2032 3V (DOT FRONT) + 1 x CR2032 3V (DOT REAR)
Autonomy
DOT FRONT : max. 20h / 140h (flash)DOT REAR : max. 30h / 200h (flash)
Battery load indicator
-
Functions
On / Flash
Weight
<30g
ILLICO 3
Do you think that basic necessarily means primitive? The 3rd generation of the ILLICO lights is the perfect proof that this is not true. The ILLICO 3 headlamp is a clever and good looking front light on each bicycle, which will stand out proudly from the handlebar. You can attach the light in 2 seconds with the convenient, rubber o-ring bracket. Its cute, small design integrates perfectly in the line of the bike, while guaranteeing visibility at night.
Highlights
The ILLICO 3 headlamp has a light output of 4 Lux and a handy switch, which is extremely easy to turn the light ON and OFF.
The ILLICO 3 is extremely light weight (<25g) and truly looks like a small jewel on your handlebar.
Light source
1 white LED > 4 Lux
Power source
Batteries 2 x CR2032 3V included
Autonomy
Max. 10h
Battery load indicator
Yes
Functions
-
Weight
<25g
UD holder for lamps, brakes etc.
This high-quality holder can be installed on forks or handlebars of the corresponding diameter and is used to attach lamps or brakes, for example.
Inner diameter: ~ 33 mm
Length: ~ 63 mm
Bore with thread: ~ 10 mm
Material: steel
Colour: black
With Allen screw for fixing.
For mounting e.g. lamps, brakes etc. on the fork or handlebar.
Scope of delivery: 1 piece
This holder was used by Urban Drivestyle Berlin on their bikes.
LED Reelight Rearlight SL 600 Flashing with Reflector
2,5 LuxThis SL600 rear light is mounted on the seat post. The light is via a small cable connected to the generator. The generator is mounted on the rear fork and the magnets on the spokes. The built-in E-mark reflex and the higher mounting of the light provides increased safety in traffic.
Key features:
No Batteries
flexible mounting
wide-angel optics
built-in reflector
permanently mounted
always light on Maintenance-free
no friction
Contents:
1 rear light
1 generator
2 magnets
1 mounting bracket.
Weight: 240 g (~0,53 pounds)
The environment can breathe easier with bike lights from Reelight.PRESS RELEASE: The magnet powered bike lights from the Danish company, Reelight, have so far spared the environment from 30 million batteries. The lights contribute to making eco-friendly cycling an easy, safe and secure alternative to the car.
Millions of spared batteries + more safe cyclists on the roads = less CO2. The environmental accounts are a little bit greener with the use of Danish company Reelight - s magnet powered and battery-free bike lights, that flash all over the streets and bike lanes. Since Reelight launched the first model in 2005, hundreds of thousands of Danish and foreign cyclists have mounted these pioneering and eco-friendly lights. Reelight are the only bike lights in the world that light up using induction power instead of batteries, and this invention has spared the environment from 30 million batteries so far.
Make it easy to choose the bikeThe Danes are one of the nations in the world who use their pedals the most, and this widespread cycling allows both the environment and the population to breathe easier. - It is healthy for the body and the environment to cycle. That is why it is important to develop solutions to make the bicycle an attractive alternative to the car. With Reelight, the cyclists do not need to think about putting their bike lights in their pockets, or that the batteries may run out halfway through the journey. Our lights are permanently fixed and light up in both daylight and in the dark - completely without batteries. So it doesn - t get any easier, says Kenneth Linnebjerg, CEO of Reelight.
Secure, safe and freeTraffic Researchers from Aalborg University have conducted a large study in which 2,000 cyclists rode with magnetic lights from Reelight for one year. The cyclists were exposed to 32 percent fewer accidents than a comparable group with ordinary battery lights which only shone in the dark. 85 percent felt "much more" or "more" secure with Reelight on the bike. - Our mission is to improve cyclists' safety while enhancing the sense of security and freedom that cycling should be associated with. We believe that all these elements must be present before more citizens climb out of their cars and onto their bikes - to benefit both the health of the nation and the environment, says Kenneth Linnebjerg.
FACT: Three clear benefits for the environment with Reelight:1) No batteriesThe lights use induction power instead of batteries. So far, this has spared the environment from 30 million batteries. Follow the battery counter on reelight.com. 2) Durable materialsHigh quality light diodes and powerful magnets give a unique durability and therefore a long lifetime. This ensures less waste, as there are many years before the lights have to be replaced.3) Safe and secure contribution to more cyclingThere is evidence that the lights increase safety and security - crucial parameters when more people are choosing to take the bike instead of the car.
FACT: Did you know... - that you with five kilometres to work can waste half a tonne less CO2 every year by choosing your bike instead of your car -
E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination
Good looking design and best quality
The E-Bike rear light to mount on frametube or carrier with LED technology.
Operates with Julet Mini connectors 2 pins to battery controller
Equipped with powerful LEDs
Alu casing black matte with red lens and guard
Length: 90 mm (~3,54inches)
Hight: 59 mm (~2,32 inches)
Width: 65 mm without screws (~ 2,56 inches)
Cable length ~ 500 mm (~ 16,68 inches)
AXA Headlight Classic LED black*
1 white LED
On/Off-Switsch
with 3 batteries LR 03 (AAA)
long lasting light
heavy dutyplastic housing
diameter 74 mm (~2,91 inches)
90 mm (~3,54 inches) length
black/chrome
with small barge
good quality
with batteries
Articles marked with* are not made for puplic use according to the german StVZO.(ONLY important for buyers from GERMANY!)
6 LED Battery Frontlamp, 80 mm (~3,15 inches) black matte
Good quality
Classic retro black lamp with modern LED!
Six LED
stylish retro LED Lamp
Metal casing
battery case inside for 3 x battery type AA (also called LR6, or AM3 )
Batteries not included
with On/Off switch on the lamp
size: 80 mm (~3,15 inches) diamter, 110 mm (~4,33 inches) long
Trelock LS780 Airflow 100 LED front light for ebikes
The Trelock LS780 Airflow LED front light for your UNI bike!
StVO-compliant, slim design and powerful light output!
When it comes to front lights, TRELOCK focuses on higher performance with a slim, harmonious design: Thanks to double-lens technology, the Airflow 100 front light, with a compact 45mm housing, achieves a full 100 lux illuminance. Two windows in the housing increase lateral visibility, while a small, removable reflector ensures a slimmer silhouette. The AIRFLOW can be flexibly aligned with the ZL 990 double-axis bracket. The high-quality choice of materials in combination with the reduced design of the AIRFLOW is particularly suited to the demanding cyclist. The Airflow 100 is StVZO-certified.
Compatible with all UNI bikes with Higo 2-pin plug.
Features of the Trelock lamp
Manufacturer: Trelock
Material: Aluminium & plastic
Colour: black
Voltage: 6-12V
Light intensity: 100 Lux
Visibility: 120m / 6500m
Includes: Front lamp, cable with 2-pin female higo round plug red (not fitted), adaptable lamp holder + attachments.
StVO-compliant
Made in Germany
Original accessories from Urban Drivestyle Berlin!
Classic Cycle LED 6V Dynamo Frontlamp, 70 mm black with Visor
First Quality
Stylish Retro Design
Classic retro black lamp with modern LED! One strong LED
stylish retro LED Lamp 10 Lux
PPS Casingmultipe
socket with for IN and OUT - eg. rear light
with On/Off switch under the lamp
size: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
The lamps meet the requirements for IPX-3 EN / IEC 60529 Light requirements acc DS 708.1 paragraph 3.1 + 3.2 + 3.3. According to section 3.2 within an angel range of + - 80 degrees. The lamps meet the requirements for use on dark road DS 7081 section 3.5 The lights are corrosion-free and water resistant: DS / EN 60068-2-52 The headlamp meets the law on road mimimum skrav for brightness, light distribution and service life.Service life: 15 hours(full brightness) LED Bulb: 1 LED 4,5V-6V 1W, with 10 lux brightness Materials: Glass polypropylen (PP) Housing polyamid (PPS)
Headlight Illumination Unit*
6 V
3 W
dynamo and headight in one unit
for left hand side mounting on fork
comes with holder
Articles marked with* are not made for public use according to the germanStVZO. (ONLY important for buyers from GERMANY!!!)
DOT FRONT
Mini size, maxi effect! The DOT headlamp for bicycles is a compact product with a lot of energy. It is available separately.
Highlights
The DOT FRONT features a unique 3 dimensional pattern. It offers an optimal solution for quick and affordable safety. The DOT headlamp is a very iconic product on your bicycle.
Light source
1 white LED > 10 Lumens
Power source
Batteries 2 x CR2032 3V
Autonomy
Max. 20h / 140h (flash)Danish regulation : max. 30h / 140h (flash)
Battery load indicator
-
Functions
On / Flash
Weight
<15g
Bullet Wing Bike Light with Power LED black matt*
Ready for take off!
The Bullet Wing Light uses the ground breaking looks of the Space Age era.Fortunately, the 50s design was adopted and not the technology - the inside was replaced with an ultra bright 1 watt powered LED.
As a highlight: two mounting brackets are included.The Bullet Wing Light can be mounted on either the handlebars or in the classic position on the forks.
1 Watt Power LED
2 light modes: super bright and moderately bright
Splash-proof plastic body in black matt
Approx.12cm x 6cm
Two different brackets included
Requires 4 x AA batteries (not included)
Up to 200 hours light from battery
Visible up to 600m
Tool-free battery change
Articles marked with* are not made for public use according to the german StVZO!
(ONLY important for buyers from GERMANY!!!)
Reflector from Hella
Colour: yellow
self-adhesive and universally applicable
Size: approx. 69 x 31 mm / 2,7 x 1,22 inch
Material thickness: approx. 6 mm / 0,24 inch
Weight: approx. 10 g
ECE approval / E marking
Scope of delivery: 1 pair (2 pieces)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in silver (brushed aluminium)
Retroreflector integrated into holder with K-approval
Fork mounting interface
For further data, please see the datasheet below.
€14.95*
€44.95*(66.74% saved)
This website uses cookies to ensure the best experience possible. More information...