Fork for Electra Townie, 20 inches, ivory20 inchSteel, ivory lacquered with Decor1 inch shaft, shaft length: 185 mm (~7,28 inches)
Thread length: 40 mm (~1,57 inches)With Pivot Brake AdaptersWidth between the fork blades = axle mounting: 105 mm (~4,13 inches)Weight: approx. 1,028 kg (~2,27 pounds)The fork may have slight storage marks.
Blade Fork ALCB double crown, double down raw 1 1/8 steerer
Length between lower end of steerer and acle mount: ~ 445 mm
Width in between the fork legs: ~ 115 mm
length of steerer: 250 mm
quadrangle tubes: 30x30 mm
Axle mount: 105 mm
For frame heads smaller than 145 mm
Lower end of steerer has 3 M6 holes
Unyielding Single Drop fork is held by 2 plates (10mm thick)Steerer tube: 1.1⁄8 ‘, ahead,Wheels: 24-29’ , wheels up to 100 mm wide
25x25 mm quadrangle tube
Weight: ~ 4,2 kg
Spring Beast Raw
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: without, raw
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Grips for handlebar made of rubber, red
Make your bike colourful!
Details:
1 pair
Length ~ 130 mm / 5,11 inches
Fits handlebars with 22.2 mm / 0,87 inches diameter.
Colour: red
Magura QM41 disc brake adapter, IS2000
Adapter allows the use of 180 mm brake discs on the rear triangle with IS2000 mount.
The adapter is screwed to the IS mount of the rear triangle and allows the use of a postmount brake caliper.
Rear brake disc: 160 to 180 mm
rear wheel mount: IS2000
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Tektro EL 350 cn left side (only for e-bikes)Brake lever for use on e-bikesFor use also with linear pull brakes and Rapidfire shiftersLever and bracket made of cast aluminium4-finger lever bladepower cut - off brakeFunction of a power cut - off brakeThere is a sensor that sends a signal to the control unit when the brake lever is pulled to switch off the motor.Mounting side: leftWeight: 108 g.Scope of delivery: 1 piece
Double crown fork 800 mm chrome plated 1 inch shaftchrome-plated, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 800 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.6 kg
Double crown fork 800 mm black 1 inch shaftblack anodized, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 800 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.6 kg
Double crown fork 570 mm black 1 inch shaftblack anodized, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 570 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.0 kg
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
180 mm (~7,09 inches) shaft height
110 mm (~4,33 inches) nosing with 45° angle
Using a single bolt mount won't recommend handle bars with big hights.
Grips for handlebar made of rubber, green
Make your bike colourful!
Details:
1 pair
Length ~ 130 mm / 5,11 inches
Fits handlebars with 22.2 mm / 0,87 inches diameter.
Colour: green
Footrest silver M10 thread for 20x4 E-bikes front / rearSilver
Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over.
Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes.
Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers!
Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: silverDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cm
Grub screw: Stainless steel 2A unhardened, can be tightened firmlyWeight: 170gHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair
Put your feet up!
Hope brake adapter N for PM to IS rear wheel 180 mm silver.
Hope adapter for mounting postmount brakes on IS2000 frames. Can be used for rear wheels with 180 mm brake disc.
Please also note the data sheet below when choosing the right adapter!
Post Mount to IS
for 180 mm rear brake disc
incl. mounting bolts
silver
Nutt hydraulic brake right side for e-bikes with power cut - off.
Brake lever for use on e-bikes
Hydraulic brake
With power cut - off
Function of a power cut - off:
There is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.
Mounting side: right
Weight: ~ 110 g.
Scope of delivery: 1 piece
Shimano Japan brake outer cable black 25 m 6 mm
Made in Japan
Technical data:
Material shift cable: metal, plastic
Length: 25 m
Outer diameter shift cable housing: 6.0 mm
Inner diameter shift cable sleeve: 3,0 mm
EAN: 4524667000570
Shimano part number: Y80A00260
Springer Fork 20 inch. black
20 inch., 1 inch steerer, steerer length 160 mm (~6,3 inches), 50 mm (~1,97 inches) thread
black anodized
the ultimate lowrider fork!
Width between dropouts: 100 mm (~3,94 inches)
width between the fork legs: ~ 70 mm
Collector's item
Vintage original Sachs-Huret Aris Power Grip twist shifter
for mounting on the left and right handlebars
for 22.2 mm handlebar diameter,
Delivery incl. Shift cables
Sachs Huret ARIS Power Gripp
Shifting comfort: Exact, sporty, fast gear selection with a single turn of the handle
with aisle safety, lock
7-speed right / 3-speed left = 3 x 7
with cables
NOS New Old Stockvery rare
Original new old stock from the 1980s
Grips for handlebar rubber, black / grey
Set consisting of:
1x short handle, length: ~ 68 mm / 2.6 inches
1x long grip, tapered, length: ~ 113 mm / 4.4 inches
Fits handlebars with 22.2 mm / 0,87 inches diameter.
Disc brake adapter IS PM 160F-140R
Disc brake adapter for conversion from International Standard to Postmount 140 mm on the rear wheel or from International Standard to Postmount 160 mm on the front wheel.
Postmount adapter
for 160 mm front brake disc
for 140 mm rear brake disc
incl. mounting bolts
black
Tektro Aries Sat right side rear for e-bikes with breaker contact.
Brake kit for use on e-bikes
Lever and bracket made of a cast aluminum
4-finger lever blade
Brake lever EL 350
Brake caliper M306H
Tekro Aries mechanical brake with an adapter for 180 mm front or rear for 160 mm disc.
power cut - off brake
Function of a power cut - off brake
There is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.
Mounting side: right
Weight: ~ 448 g.
Length of the Bowden cable: ~ 175 cm
Scope of delivery: brake lever, Bowden cables and brake caliper with brake pads.
Tranz X Bar Ends bar ends, silver
Details:
1 pair with end caps
Total length: ~ 155 mm
Fits handlebars with 22 mm diameter
Color: silver
Material: aluminum
Weight: ~ 135 g
Springer Fork 20 inch. Chrome
20 inch., 1 inch steerer, steerer length 160 mm (~6,3 inches), 50 mm (~1,97 inches) thread
chrome-plated
the ultimate lowrider fork!
Width between dropouts: 100 mm (~3,94 inches)
width between the fork legs: ~ 70 mm
Spacer ring aluminium Ø 35 mm, 2 mm high, black
Inner diameter: 35 mm / 1.38 inches
Outer diameter: 40 mm / 1.57 inches
Height: 2 mm / 0.078 inches
Colour: black
Material: aluminium
Disc Brake Adapter Front IS / PM TEKTRO A5 Disc 203 mm
TRP Tektro A5 IS/PM Adapter Front 203mmThe TRP Tektro A5 IS/PM adapter for fork with IS mount and 203mm brake disc in combination with postmount caliper.
Details:
Fork/frame type: IS (International Standard).
Brake caliper type: Postmount
Brake disc diameter: 203mm front
Weight: approx. 60 g
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Tektro Auriga Comp IS2000/PM AQ Adapter A4 180mm HR
This adapter is for use of a 180 mm disc in combination with Tektro Auriga Comp Postmount brakes on frames with an IS2000 brake mount.Details:
PM brake caliper to IS frame.
material: aluminium
for rear
for 180mm brake disc
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
End Caps, plastic white
impact resistant
screw mounting
unmounted, the inner clamp is 20.4 mm and clamps reliably in bicycle handlebars
1 pair
NOS = new old stock
Made in Italy by Plastiche Cassano
Gazelle 28 inch bicycle forkFor 28 inch wheels with hubs of 100 mm installation width.Shaft with external thread Ø 25.2mm.weight approx. 1 kghave traces of storageBrake drum brakeBracket for dynamocolour black / chromeScope of delivery: 1 piece
Steerer length
220 mm
Steerer diameter / stem width:
28,5 mm
Steerer diameter at cone seat:
28,6 mm
Installation hight:
340 mm
For Hub width:
135 mm
Original fork from the UDX bike series from Urban Drivestyle Berlin!
Foldable handlebar with foldable stem
Stable handlebar/stem combination!
For transport or storage, the handlebar ends as well as the stem / handlebar shaft can be folded to save space.
Details:
Width folded handlebar: ~ 200 mm
Width of unfolded handlebars: ~ 585 mm
total length: ~ 420 mm
Elevation: ~ 0 mm
Alu
steerer tube mount: 28.6 mm
Colour: matt black powder coated
Storage space for a mobile phone (4x holes with thread on the back)
The handlebar-stem combination was originally installed on the Uni Micro folding bike by Urban Drivestyle Berlin!
Conical spacer from Ritchey for semi-integrated headsets.
Spacers made of high-strength plastic for the steerer tube to adjust the height of the stem and handlebar.Conically shaped for a more beautiful appearance
Material plasticfor 1 1/8" steerer tubeColor matte blackHeight 15 mmDiameter inside: 29 mmDiameter outside bottom: 50 mmDiameter outside top: 36 mmWeight ~ 11 g
Double crown fork 570 mm chrome plated 1 inch shaftchrome-plated, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 570 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2 kg
Classic Cycle Dual Springer Vintage Bicycle Fork
with Disc Brake mount
with 1 inch stem
Abraham Linkage Monark Fork
The most beautyful springer ever produced
up to 26 inch., adjustable springs
black with chrome-plated springs
1 inch stem = 25,4 mm
stem lengh: 215 mm
without thread for ahead headset
Width between Fork legs: 73mm
Axle mount width: 100 mm
Distance between fork crown and axle dropout: 385 mm
Weight: 2,74 kg
with mount for a brake arm and Disc brake (160mm max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark
Brooks Leather Bar Tape, honeyIn the Brooks tradition, this bar tape is made of natural leatherto make it the perfect complement to your BROOKS saddleThe bar tape comes in a kit including:-2 strips of light, perforated leather bar tape-2 natural cork and wood bar end plugs with the Brooks Logo-2 adhesive cloth stripsleather colours: honey (437), black (439) and brown (438)Leather Bar TapeBrooks has reintroduced a classic product that may force many cyclists, more familiar with modern alternatives, to reassess the material they rely on for grip and comfort Leather bar tape.This naturally durable and breathable product has been overtaken by a plethora of manmade fibres and materials in recent years but could be on the verge of a comeback among cycling aficionados.Andrea Meneghelli explains: "Some good things just never change. One of these is certainly leather, a material used since thousands of years for clothing, shoes, etc because of its unique properties."Sometimes Innovation for innovations sake sees traditional materials - which are still capable of outperforming newer ones - left behind as fashions change. Today most handlebar tapes for road bikes are made of plastic, synthetic cork or micro-fibres but Brooks believes that by reintroducing leather it could become the next big thing among discerning cyclists."
Blade Fork ALCB double crown, double down black matte 1 1/8 steerer
Length between lower end of steerer and acle mount: ~ 445 mm
Width in between the fork legs: ~ 115 mm
length of steerer: 250 mm
quadrangle tubes: 30x30 mm
Axle mount: 105 mm
For frame heads smaller than 145 mm
Lower end of steerer has 3 M6 holes
Unyielding Single Drop fork is held by 2 plates (10mm thick)Steerer tube: 1.1⁄8 ‘, ahead,Wheels: 24-29’ , wheels up to 100 mm wide
25x25 mm quadrangle tube
Weight: ~ 4,2 kg
Black Beast
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: Black, satin. powder coated
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
!!! ATTENTION, ONLY ONE LEFT HANDLE !!!
Handlebar grip made of plastic, black / grey, left only
Scope of delivery: 1x left handle
Length: ~ 113 mm
Fits handlebars with a diameter of 22.2 mm.
The grip can also be used as a right grip with the logo turned downwards. Haptically, there is no difference.
If you want to use the handle as a pair, please order this item twice.
Magura QM43, IS 2000 disc brake adapter.
Adapter for use on IS 2000 forks in conjunction with Magura Postmount calipers.
adapted to 160 mm
adapted to 203 mm for Fox 40 IS forks
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Gazelle road bike fork 28 inch ~ 80sFor 28 inch wheels with hubs of 100 mm installation width.Shaft with external thread Ø 25.4mm.Weight approx. 1 kgColour: wine redFor rim brakesScope of delivery: 1 piece
shaft length: 187 mmShaft diameter: 25.4 mmMounting height: 138mmMounting width: 100 mm
Eine orginale Gabel von Gazelle vermutlich aus den 80er Jahren!
€79.95*
This website uses cookies to ensure the best experience possible. More information...