204 Suspension Fork RST Guide 20 Zoll TNL Fatbike 1 1/8 Ahead for Disk Brake
Turn & Lock-out A hydraulic cartridge damping system with compression adjustment to lockout function.
The RST Guide TNL is the Suspension Fork for 20" Fat Bikes / Urban E-Bikes
for 20 inch wide wheels with 135 mm hubs.
Lockout and Preload adjustable
1 1/8" steerer Ahead
Weight: ~. 3,37 kgs (with 200 mm long steerer)
For Disc brake Post Mount 6
comes with manual
Steerer length
260 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
45 mm
Ssytem:
Coil in left stanchion
Damping:
Oil in right stanchion
GUIDE 20 MODEL TNL
STEERER: 28.6mm Steel
CROWN PITCH: 180 mm
CROWN: Aluminum Black Coating
STANCHION: 32mm Steel CP Finish
CASTING: Aluminum 9mm Open Dropout
ADJUSTMENT: L, P
FEATURES: Hydraulic Lock-Out
SYSTEM: Oil (Right), Coil (Left)
Coil TRAVEL (mm) 20": 45 mm
BRAKE TYPE: Disc Only (160mm without adapter)
WEIGHT (kgs) (w/ 200mm steerer) 3.37
Outer Cable Housing Glittering Blue Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Footrest black M10 thread for 20x4 E-bikes front / rearBlack
Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over.
Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes.
Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers!
Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: blackDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cmWeight: 170g
Grub screw: Stainless steel 2A unhardened, can be tightened firmlyHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair
Put your feet up!
Extra Wide Double Crown Fork 660 mm black 1 1/8 steerer
noble and supercool, for 20-26 inch. wheels, 1 1/8 inch steerer,
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Reducer / Spacer 25,4 mm (~1 inch) to 28,4 mm (~1.12 inches)
Aluminium
AL6061
25,4 mm (~1 inch) to 28,4 mm (~1.12 inches)
80 mm (3,15 inches) long
Silver
Outer Cable Housing Checkered Flag Black / Yellow 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Glitter Green Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Springer Fork 26 inch. without Cantilevers, black
26 inch., can be used also on cruisers, adjustable, black
1 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
width between fork 71 mm (~2,79 inches)
Width between drop outs: 100 mm (~3,94 inches)
Outer Cable Housing Black Checker Shaded 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Springer Fork 28 inch. without Cantilevers
28 inch., can be used also on cruisers, adjustable, chrome-plated
1 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
width between the fork legs: 71 mm (~2,79 inches)
Width between drop outs: 100 mm (~3,94 inches)
Weight: ~2,1 kg (~4,63 pounds)
Double Crown Fork 69 cm CP 1 1/8 Steerer
noble and supercool, for 20-28 inch. wheels, 1 1/8 inch steerer
alloy triple trees and cp steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (3,70 inches)
fork tube length: about 690 mm (~24,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Double Crown Fork 69 cm (~27,16 inches) black matte 1 1/8 steerer
noble and supercool, for 20-28 inch. wheels, 1 1/8 inch steerer
alloy triple trees and black steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (~3,70 inches)
fork tube length: about 690 mm (~27,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Frame and Fork Protectorsfor Double Crown Forks 30
to protect Your frame and your double crown fork from dings and dents!
55 mm (~2,16 inches), 1 pair for 30 - 32 mm (~1,18 - 1,26 inches) tubes
Double Crown Fork 63 cm black 1 1/8 steerer
noble and supercool, for 26 inch. wheels, 1 1/8 inch steerer
Alloy triple trees and black steel fork tubes for drum- or disc brakes.
The ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,39 inches)
fork tube length: about 630 mm ( ~24,80 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Extra wide and fat Double Crown Fork, 700 mm (~27,56 inches), 50 mm (~1,97 inches), black, up to 28"
50 mm (~1,97 inches) tubes! Superfat!
noble and supercool, for up to 28 inch. wheels, 1 1 /8 inch steerer,
Alloy triple trees and chrome-plated steel fork tubes for discbrakes.
The ultimate fork for custom chopper and cruiser freaks!
A - fork tube length: about 700 mm (~27,56 inches)
B - Fork tube diameter: 50.8 mm (~2 inches)
C - Fork tube inner width: 125 mm (~4,92 inches)
D - Width between axle mounts: 150 mm (~5,90 inches)
E - Steerer length: 300 mm (~11,81 inches)
F - Steerer diameter: 1 1/8 inch - 30 mm
G -Distance outside edges of the risers: 95 mm (~3.74 inches)
H - Handlebar mount: 22.22 mm
weight: 3,95 kg (~8,71 pounds)
You can shorten the tubes and stem.These fork is developed for 100 mm (~3,94 inches) rims.
NEW Classic Cycle Dual Springer Vintage Bicycle Fork for 28" x 82 mm (~3,23 inches) rims
with Disc Brake mount
with 1 inch steerer
Abraham Linkage Monark Fork
The most beautyful springer ever produced now for 80 mm (~3,15 inches) rims suits up to 28" Tires
up to 28 inch., adjustable springs
black with chrome-plated springs
1 inch steerer = 25,4 mm
steerer lengh: 215 mm (~8,46 inches)
without thread for ahead headset
Width between Fork legs: 95 mm (~3,74 inches)
Axle mount width: 100 mm (~3,94 inches)
Distance under lower fork crown till axle dropout: 455 mm (~17,91 inches)
Weight: 3,2 kg (~7,05 pounds)
with mount for Disc brake (160 mm (~6,30 inches) max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark
Classic Cycle Double Crown Chopper Springer Fork for Disc Brake 1 1/8 steerer
One of the most beautiful chopper springer forks you can get!
Chrome-plated, noble and supercool for 20-26 inch. wheels up to 3.00!
CroMo Steel and Alu Bridges
A - Distance between axle and handlebar attachments: 1000 mm (~39,37 inches)
B - Diameter of thicker fork tube: 29 mm (~1,14 inches)
C - Distance between springer shafts: 108 mm (~4,25 inches)
D - For hub width of: 100 mm (~3,94 inches)
E - Steerer length: 270 mm (~10,63 inches)
F - 1 1/8 inch steerer
G - Minimum width (outer edge - outer edge of the lift): 77 mm (~3,03 inches)
H - Handlebar mount 22.2 mm
I - Distance between axle mount and lower bridge: 580 mm ( ~ 22,83 inches)
The shaft and the fork tubes can be shortened.
The fork is supplied with a mount for the disc brake (for brake discs without an adapter up to 160 mm / ~6,3 inches in diameter).
Weight: ~ 6,5 kg (~14,33 pounds)
Double Crown Fork 63 cm
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,38 inches)
fork tube length: about 630 mm (~24,8 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Downhill Upside - Down Suspension Fork up to 26"
perfect for the cool look of a heavy motobike.
As ridden by Mountainbike Racing's team leader, the range-topping this downhill fork now offers 180 mm (~7,09 inches) of smooth travel from and MCU & spring dumper with rebound adjustment.
It needs a 20 mm (~0,8 inches) thru axle (110 mm (~4,3 inches) hub width) and offers
disc brake mount IS2000
Noble and supercool till 26 inch. wheels, 1 1/8 steerer
Size: 26" Downhill
Crown: alloy forged dimension: 150 mm (~5,9 inches) (middle to middle)
Preload: Rebound / Compression
Bridges / crowns: forged, T6 heated, 6061 Aluminium
Stanchion: butted, T8 heated, 6061 Aluminium
Tubes: hard-anodised, T9 heated, 6061 Aluminium
Dumper: MCU & Spring
Max. Travel: ~ 180 mm (~7,08 inches)
Width between tubes: ~ 103 mm (~4,06 inches)
Steerer length: ~230 mm (~9,06 inches)
width between axle mounts: 110 mm (~4,33 inches)
with 20 mm thru axle (~0,79 inches)
fork tube length: ~ 750 mm (~29,53 inches)
Distance between legs / slider: ~103 mm (~4,06 inches)
Diameter lower standpipe: ~ 45 mm - in the area of the bridges: ~ 47.5 mm
Slider tube diameter: ~ 37 mm
Distance between Axle and lower crown: ~ 510 mm (~20,08 inches) - is matter of how you assemble the crown
Weight: ~ 4,35 kg (~9,59 pounds)
Suitable Hub: Item: 326330
Extra Wide Double Crown Fork 660 mm black
noble and supercool, for 20-26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Double Crown Fork long shaft, offset 84, black
noble and supercool, for 20-28 inch. wheels, 1" inch steerer
alloy triple trees and black steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
Extra Wide Double Crown Fork 900 mm black 1 1/8 Steerer
noble and supercool, for 20-28 inch wheels
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 900 mm (~35,43 inches)
CRMO fork diameter: 32 mm (~1,26 inches)steerer length: 295 mm (~11,61 inches)
1 1/8 inch steerer
Headset X-ACT Thread, S101RGK for 1 inch forks with thread
Steel, ball-bearing
Thread: 25.4 mm (~1 inch)
34 mm (~1,34 inches) inner width of frame head
26.4 mm (~1,04 inches) inner width for bearing seat
Height: 33.5 mm (~1,32 inches)
Chrome plated
Springer Fork 26 inch. for Cantilevers/V-Brakes 1 1/8 Steerer
26 inch., can be used also on cruisers, adjustable, chrome-plated
1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
Width between dropouts: 100 mm (~3,94 inches)
width between the fork legs: ~ 70 mm
Springer Fork 26 inch. for Cantilevers/V-Brakes, black 1 1/8 steerer
26 inch., can be used also on cruisers, adjustable, black
1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
thread length: 100 mm (~3,94 inches)
Width between drop outs: 100 mm (~3,94 inches)
Bent Springer Fork 26 - 28 inch. 1 1/8 steerer
originally for 26 inch., can be used also on cruisers, adjustable, chrome-plated
1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches) 100 mm (~3,94 inches) thread
the ultimate lowrider fork!
width between the fork legs: ~ 70 mm
Reducer / Spacer 25,4 mm (~1 inch) to 30,4 mm (~1.20 inches)
Aluminium
AL6061
25,4 mm (~1 inch) to 30,4 mm (~1.20 inches)
80 mm (~3,15 inches) long
Silver
Double Crown Fork 69 cm CP
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
If you have a frame which needs a 1 1/8 fork steerer you may need item 390627 and 968
alloy triple trees and cp steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (3,70 inches)
fork tube length: about 690 mm (~24,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Outer Cable Housing Black / Silver Diamondshape Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Bent Springer Fork 26 inch. for Cantilevers/V-Brakes
26 inch., can be used also on cruisers, adjustable, chrome-plated
1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
Width between dropouts: 100 mm (~3,94 inches)
the ultimate lowrider fork!
width between the fork legs: ~ 70 mm
Springer Fork 26 inch. with 1 1/8 Steerer
26 inch., can be used also on cruisers, adjustable, chrome-plated
1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
Width between dropouts: 100 mm (~3,94 inches)
Total length: 610 mm (~24,0 inches)
width between the fork legs: ~ 70 mm
Double Crown Fork 63 cm black
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
Alloy triple trees and black steel fork tubes for drum- or disc brakes.
The ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,39 inches)
fork tube length: about 630 mm ( ~24,80 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Spacer ring / Spacer Alu for 1 1/8" stems, 15 mm high
Inner diameter: 28,58 mm / 1,125 inches
Outer diameter: 34 mm / 1,34 inches
Height: 15 mm / 0.6 inches
Colour: black
Original stem / spacer of the UDX Bike series by Urban Drivestyle Berlin
Double Crown Fork 63 cm
noble and supercool, for 26 inch. wheels, 1 1/8 inch steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
fork tube inner width: about 86 mm (~3,38 inches)
fork tube length: about 630 mm (~24,8 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Extra wide and fat Double Crown Fork, 700 mm (~27,56 inches), 50 mm (~1,97 inches), black, up to 28"
50 mm (~1,97 inches) tubes! Superfat!
noble and supercool, for up to 28 inch. wheels, 1 inch steerer
Alloy triple trees and chrome-plated steel fork tubes for discbrakes.
The ultimate fork for custom chopper and cruiser freaks!
A - Fork tube length: about 700 mm (~27,56 inches)
B - Fork tube diameter: 50.8 mm (~2 inches)
C - Fork tube inner width: 125 mm (~4,92 inches)
D - Width between axle mounts: 150 mm (~5,90 inches)
E - Steerer length: 300 mm (~11,81 inches)
F - Steerer diameter: 1 inch
G -Distance outside edges of the risers: 95 mm (~3.74 inches)
H - Handlebar mount: 22.22 mm
weight: 3,95 kg (~8,71 pounds)
You can shorten the tubes and stem.
These fork is developed for 100 mm (~3,94 inches) rims.
Demon Fork TSP Custom Fork
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 20 till 28 inch tires
up to 102 mm (~4,01 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down to 80 mm (~3,15 inches)
Brake mounts for disk
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount).
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Bent Springer Fork 26 inch. for Cantilevers/V-Brakes
26 inch., can be used also on cruisers, adjustable, chrome-plated
1 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
Width between dropouts: 100 mm (~3,94 inches)
the ultimate lowrider fork!
width between the fork legs: ~ 70 mm
Springer Fork 26 inch. without Cantilevers, black, 1 1/8 steerer
26 inch., can be used also on cruisers, adjustable, black
1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
width between fork 71 mm (~2,79 inches)
Width between drop outs: 100 mm (~3,94 inches)
Outer Cable Housing Black Confetti Gloss 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Stem 1 1/8 195 mm (~7,68 inches) for Springfork
195 mm (~7,68 inches) - messured from bearing seat to top of thread
chrome-plated
inner diameter: 25,4 mm / 1 inch
Outer Cable Housing Silver / Rainbow Shining 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Classic Cycle Double Crown Chopper Springer Fork for Disc Brake
One of the most beautiful chopper springer forks you can get!
Chrome-plated, noble and supercool for 20-26 inch. wheels up to 3.00!
CroMo Steel and Alu Bridges
A - Distance between axle and handlebar attachments: 1000 mm (~39,37 inches)
B - Diameter of thicker fork tube: 29 mm (~1,14 inches)
C - Distance between springer shafts: 108 mm (~4,25 inches)
D - For hub width of: 100 mm (~3,94 inches)
E - Steerer length: 270 mm (~10,63 inches)
F - Shaft diameter: 1 inch / 25,4 mm
G - Minimum width (outer edge - outer edge of the risers): 77 mm
H - Handlebar mount: 22.2 mm (~0,9 inches)
I - Distance between axle mount and lower bridge: 580 mm ( ~ 22,83 inches)
The shaft and the fork tubes can be shortened.
The fork is supplied with a mount for the disc brake (for brake discs without an adapter up to 160 mm / ~6,3 inches in diameter).
Weight: ~ 6,5 kg (~14,33 pounds)