Custom Frame Parkroad, raw
Made in Europe!
Colour: uncoloured / raw
Steel
possible rim and tire sizes:
28" rims up to 82 mm width / 3,23 inches, maximum tire size 28 x 3.0
26" rims up to 102 mm width / 4,02 inches, maximum tire size 26 x 4.8
24" rims up to 102 mm width / 4,02 inches, maximum tire size 24 x 4.8
bottom bracket size: BMX (US) one piece crank
head tube: 1 1/8"
For Seat posts of 28,6 mm / 1,13 inches
disc brake mounting possible:yes!
coaster brake mounting possible: yes!
bike rider heights: from 1,55 m to 1,85 m / 61 - 73 inches
head tube length: 155 mm / 6,102 inches
width of chain stays: ~135 mm / 5,315 inches
dimensions:
seat -> head tube: ~675 mm / 26,57 inches
seat -> bottom bracket: ~615 mm / 24,21 inches
seat tube: ~420 mm straight messured / 16,54 inches
weight: about 7,4 kg / 16,31 lbs
UD 204 Double Crown Suspension Fork Fatbike, matt black
For 20 inch wheels with hubs of 135 mm installation width.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 325 mm
Distance between axle mount and end of uprights: ~ 600 mm
Weight approx. 2.7 kg (with 270 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
270 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
unidentified
Damping:
unidentified
Distance between steerer tubes at tyre height:
~ 120 mm
Original fork of the bikes from Urban Drivestyle Berlin!
Wiring harness 1T4
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Waterproof plugs / connectors
Cable length: ~ 173 cm / 68,11 inches, incl. connector ~ 180 cm / 70,86 inches
Connections:
1x female 3-PIN Julet connector yellow for throttle / thumb throttle.
1x female 5-PIN Jullet connector green for display
2x male 3-PIN Jullet connector yellow for brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
UD Trailer Micro foldable
Kit with need for optimisation!
According to UD staff, the necessary optimisations of the trailer can be easily implemented by the experienced do-it-yourselfer.
The pdf file below contains a summary of the individual steps.
Technical info:
Size: 64 cm x 47 cm x 13 cm
Weight: 7 kg
Colour: black
Tyres: 10 inch pneumatic tyres with industrial bearings
When not in use, the trailer can be folded up behind your UD.
Unfortunately, we do not have any further information or assembly instructions.
Genuine article from Urban Drivesytle Berlin.
Battery contacts for e-bike
cable length: ~ 200 mm
A base plate for the battery and the matching self-adhesive seal / padding can be purchased separately.
Original part from Urban Drivestyle Berlin!
Disc brake adapter from Magura QM12, IS to PM.
Adapter enables the use of 160 / 180 mm brake discs on forks and rear triangle with IS 6" mount.
The adapter is screwed onto the IS mount of the fork or frame and allows the use of a postmount brake caliper.
Front brake disc: 180 mm
rear brake disc: 160 mm
Fork mount: IS 6
rear mount: IS 6"
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Tektro EL 350 cn right side (only for e-bikes)Brake lever for use on e-bikesFor use also with linear pull brakes and Rapidfire shiftersLever and bracket made of cast aluminium4-finger lever bladepower cut - off brakeFunction of a power cut - off brakeThere is a sensor that sends a signal to the control unit when the brake lever is pulled to switch off the motor.Mounting side: rightWeight: 108 g.Scope of delivery: 1 piece
Conical spacer from Ritchey for semi-integrated headsets.
Spacers made of high-strength plastic for the steerer tube to adjust the height of the stem and handlebar.Conically shaped for a more beautiful appearance
Material: plasticfor 1 1/8" steerer tubeColor: glossy blackHeight: 15 mmDiameter inside: 29 mmDiameter outside bottom: 50 mmDiameter outside top: 36 mmWeight ~ 11 g
Tektro brake pads organic for disc brakes E10.11 green(organic) especially low noise - slightly higher wearThe Tektro brake pad pair is compatible with both cable and hydraulic brakes of the Uni MK series.hydraulic brakes of the Uni MK, as well as for other bikes and e-bikes.Compatible only for Tektro 350e brakeScope of delivery: two brake shoes and one spring clip
Fender Set 26 inch. with Ducktails, black glossy laquered
fender set for 26 inch. bikes, black, incl. fender struts
for cruisers or similar bike types
width: 80 mm (~3,15 inches)
height: 26 mm (~1,02 inches)
Inside diameter: approx. 650 mm
Outside diameter: approx. 700 mm
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Avantgarde genuine leather grips on chrome-plated steel, Light Brown
High quality and handmade leather grips, 100% genuine leather on chrome steel base
Suitable for all bicycle handle bars
22,3 mm (~0,88 inches) inner diameter, easy to install with 2 Allen screws.
Material: genuine leather and chrome steel
Size: 12,5 cm (~4,92 inches) long
Weight: 176 g (~0,39 pounds)
Light Brown
1 Pair
Made in Europa
30 meters of Chain 1/2 x 1/8 roll
steel
finish: silver
including 30 Sigma Quick Link chainlock
410 B
1 Speed
30 meters (~32,81 yards)
including instruction manual
Stem Steel black Humpert Ergotec CV 101
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,90 inches) shaft height
60 mm (~2,36 inches) nosing with 15° angle
Using a single bolt mount won't recommend handle bars with big hights.
Fender Stays Wave
The stay for your cruiser!
You can mount two pieces on one side (see picture) or use one piece only for one side.
Fit for the articles with the numbers: 220x, 221, 222, 223x, 224, 243, 244, 519, 1223, 385204
Color: Silver anodized
Material: Aluminum
Includes: 1 pair
Without mounting material!
Distance between the axle mount and the mounting hole for the mudguard: ~ 35 cm / 13,78 inch
Distance between mounting holes mudguards: ~ 9.5 cm / 3,74 inch
Stem Steel Black Humpert Ergotec CV 100
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black steel
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,91 inches) shaft height
100 mm (~3,94 inches) nosing with 40° angle
Using a single bolt mount won't recommend handle bars with big hights.
The bike, its construction, its maintenance and repairsOld Knowledge 1924From the foreword of 1924: "The reader is advised to immerse himself in the construction of this ornate machine by reading this book, and as long as he practices the sport himself and owns a bike, the instructions for care given here to follow faithfully. "158 pagesAuthor: Gustav A. Krumm, Richard BürgerISBN 978-3-935517-85-0
Perfectly manufactured out of heavy and sturdy canvas. Fits on handlebar or looks really cool on rear chainstay.Made of thick canvas and solid leather straps with metal buckles.The compartments are perfect for tools, something to drink, a light jacket, newspaper, your cellphone or a picnic lunch, offering style and function in equal amounts.It is a used item and not essentially a bicycle bag which is easy to fit.This old school item gives also cool style as a shoulder bag.
Dimensions: 31 x 25 x 14 cm (~12,20 x 9,84 x 5,51 inches)
Weight: ~ 640 gr. (~1,41 pounds)
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
144
colour:
raw
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Original GANT Lautaret 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted cotton
Inner hand: finest soft glove leather with light padding
Size: 7
Color: white with blue and red stripes
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer Lautaret
NOS New Old Stock ~ 1970s - 1980s
Universal Switch, Horn, Run - Stop, Kill Switch
switch squared for speed pedalec, engine stop, horn or e.g. override - Quad / ATV
with waterresistant rubber frame
Size of switch: ~ 27 x 27 mm
Length of cable: ~ 700 mm
Raw Beast - Production sample
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: without, raw
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Polt M rear wheel motor 600 W, 36 V for E-bikes
General:
The rear motor or rear wheel motor is, as the name suggests, located in the rear wheel of the bicycle. This location makes the rear of the bike slightly heavier than the front and gives the motor plenty of thrust to help move forward. The rear motor can be used with derailleur gears and thus offers a wide range of gear ratios.
Technical details:
Type: Direct drive
Voltage: 36V
Rated Power: 600W
Speed: 25 km/h
Torque max: 44,41 N.m
Wheel Size: 24 - 29"
Diameter Motor: ~ 240 mm / 9,45 inches
Installation width: 150 mm / 5,90 inches
Weight: ~ 5,7 kg / ~ 12,56 lbs
Motor connection: Cable
Spokes: 12G + 13G
Spoke holes: 36 holes
Brakes: Discbrake mount
Cable position: left
Color: Silver
Housing: Die-cast aluminium
Mounting accessories are included as shown on the pictures.
Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.
Spring Beast Black
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: black, powder coated
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Fahrradkorb oder Lenker Deko Blumengirlande rot
Schönes Accessoire für den Lenker, für den Vorbau, für das Oberrohr oder oder oder. Deiner Phantasie sind keine Grenzen gesetzt.
Dieses zauberhafte Detail ist sehr leicht und ohne Werkzeug zu montieren.
Dekoriere dein Fahrrad nach deinem Belieben und werde zum Blickfang aller. Mache dein Fahrrad mit diesen Blumen zu einem Unikat.
Länge: ca. 130 cm
Transparent Grip Tape for Boost running board Uni Boost
Specifications:Material: Self adhesive transparent grip tape.Color: TransparentOriginal accessories from Urban Dirvestyle Berlin
Running board UNI-BST-WOO-BOA and self-adhesive seal SEA-WOO-BOA also available
Tool set Urban Drivestyle
Ring and open-end wrench 13 / 15 / 18
Allen key 2 / 4 / 5 / 6
Original from Urban Drivestyle Berlin!
Made in Germany by Format
Bicycle garage rain cover Urban Drivestyle Berlin
with storage bagFits 204 bikesColor: black with UD print - Interior color: silver coatingDouble seams
Elasticated front and back,
Click closure
Material:
190T polyester fabric with PVC coating.
Short side stand for 20" bikes black
Stable side stand
Direct mounting on frame with KSA 40 mount
Hole spacing 40 mm / 1,57 inches, with threaded through hole
Optimum stand due to wide base.
Also suitable for e.g. low-lying bicycle frames, e-scooters, scooters....
Material: aluminium
Weight: approx. 250 g / 0.55 lbs
Colour: black
Length from centre of mounting points to floor: ~ 240 mm / 9.45 inches
Mounting side: left
Shimano Deore HB-M510 VIA M
Front hub 32-hole aluminum, silver
Axle length: 108 mm / 4,25 inches, M9
Installation width: 100 mm / 3,94 inches
Flange width: 71.6 mm / 2,82 inches
Bolt circle diameter PCD: 42 mm / 1,65 inches
Number of holes: 32 holes
Weight: 170 g / 0,375 lbs
Silver aluminum hub
with quick release 133 mm / 5,24 inches (5-1/4")
for rim brake
Silverfish battery 48V 19.2Ah 920Wh
Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.
Our 48V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.
The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.
Features of the battery
Manufacturer: LG cells in Silverfish housing
Voltage: 48V
Capacity: 920Wh = 48V x 19.2Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7,5 cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!
Note:From the V5 UNI Bike models (frame number starts with 05....) we only have 48V systems for 250W & Export versions!
* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).
Fender Stays 45-50 mm (~1,77 - 1,97 inches) wide
Chrome plated
one piece
for 45-50 mm (~1,77 - 1,97 inches) wide fenders
Total length: 345 mm (~13,58 inches)
Ø 4 mm (~0,16 inches)
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm (~0,87 inches) shaft
170 mm (~6,69 inches) shaft height
80 mm (~3,15 inches) nosing with 45° angle
.Using a single bolt mount won't recommend handle bars with big hights
Tracker Handlebar 620 mm (~24,41 inches) silver
Steel
Width: 620 mm (~24,41 inches)
Height: 37 mm (~1,46 inches)
for 25,4 mm (~1 inch) stems
Length of grip: 190 mm (~7,48 inches)
Angel: 37°
aluminium look
Weight: 542 g (~1,19 pounds)
T-shirt light gray
with imprint "PimpGarageTM" on the left chest
and dancing girl on her back
Please choose your size: S, M, L, XL
The T-shirts are produced very high quality and in best condition.
The T-shirts are from the insolvency of PimpGarage TM Custombikes GmbH.
The original price of the T-shirts was € 29.99
T-Shirt "PG" GoGo, red
with PimpGarageTM imprint on the front and dancing girl on the back
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Saddle Wittkop Medicusunisex, blackRebuilt from Originals of the 80s/90sChrome-plated base frame with strong double springsPU foam coverSize over all: about 240 x 200 mmweight: 1050 gr.
NEW!!
TSP Custom Frame Wave HC 130mm + Demon Fork HC
More than 100 years tradtion in frame building meets modern custom design in perfection.
TSP made it: they designed the perfect wave to cruise. The TSP Wave HC frame is a custom-made bike frame crafted in TSP workshops in Italy and is the ultimate and the most extreme design of bike frames. The Hard Core is near to those of our Wave line but lower and more aggressive!
Even though overall extreme, it is easy to drive and suitable for long cruises.
It can be used in thousands of different configurations, giving vent to all your creativity: it can fit virtually any component on the market such as:
forks (cruiser, double crown, springer)
rims (24″, 26″ up to 100 mm)
tires (24″ up to 4.5, 26″ up to 3.5″)
handlebar (every model on the market)
hubs (coaster brake, automatic gearboxes, integrated gearboxes, disc brakes)
Another unique feature of this chassis is the very low weight: about 25% less than other chassis of the same category!
It is one-size and suitable for people between 1,60 and 1,90 m.
All tsp frames / forks are not constructed for motorized vehicles, no matter if its a combustion or electric engine. If the frame is used with any kind of engine it's warranty will expire immediately.
A special highlight: Wheels 24 inch, 26 inch with 100 mm (~3,94 inches) rims
Colour: uncoloured / raw
possible rim sizes: 24" 26" up to 100 mm (~3,94 inches) width
bottom bracket size: BMX (US) one piece crank
head tube: 1 1/8"
needed seat post: 27,2 mm (~1,07 inches)
disc brake mounting possible: no!
coaster brake mounting possible: yes!
bike rider height: from 1,60 m to 1,95 m (~5,25 - 6,4 ft)
frame steel: tig welding cr-mo
head tube length: 140 mm (~5,51 inches)
width between chain stays: 130 mm (~5,12 inches)
dimensions:
seat -> head tube: ~746 mm (~29,37 inches)
seat -> bottom bracket: ~610 mm (~24 inches)
Length over all: 1160 mm (~45,67 inches)
weight: about 5,7 kg (~12,57 pounds)
Demon Fork HCDemon Fork TSP HC Custom ForkExceptional Custom Fork for all rims up to 100 mm (~3,94 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 24 oder 26 inch tires up to 100 mm (~3,94 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches)
Brake: you can install left 160 mm (~6,3 inches) disc brakes with the special support included in the package
Length over all: 705 mm (~27,76 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
VOXOM bike lock folding lock Clipster, Sold Secure Silver Standard
The new VOXOM folding lock Clipster is next to the VOXOM folding lock Compact, with its 1,000 g / 2,2 lbs the lightest folding lock with Sold Secure Silver Standard on the market.
It consists of several steel links with protected rivets and withstands an attack with various tools for at least three minutes.
The metal parts are rustproof and have a UV-protected cover, so that even strong weather conditions cannot impair the security of the lock.
To avoid scratches in the frame, the links are coated with plastic.
The VOXOM folding lock Clipster has a circumference of 85 cm / 33,46 inch and can be smoothly folded to a compact size.
Hardened steel links- Increase security to protect your bike
Weather-proof- Metal components are rust free with UV protected cover
Ultra protected rivets- Rivets are designed with VSR technology which protects against sawing and cutting
Quiet and smooth movement of the joints through friction mechanism
Easy to carry- Clipster for the Hipster
Fast and easy to use- Easy and convenient to operate
Super compact design ensures lock is easy to carry and not too heavy
Automovtive standard keys (3 keys included)
Color Black
Weight ~ 1000 g / ~ 2,2 lbs
About Sold Secure Standard:
Sold Secure is dedicated to reducing the risk of crime by the assessment of security products. Sold Secure Approval is classified into 3 main categories:Bronze, Silver & Gold. The categories reflect the amount of time per test and the tools that are used and themselves vary depending on what test specification is being used. The higher the grading (Bronze is the lowest) the higher the security provided by the product.
Stepless Manual Shifting
Change your gear ratio, even under load.
No more step changes, locked gears, empty pedaling, or creaking.
Ratio range: 310%
Max. gross vehicle weight: 160 kg
Max. continous torque: 50 Nm
Max performance: 250 W
Freewheel: 3-spring
Axle options:10*135 threaded axle
Brake options: Disc up to 180 mm
36 holes
€249.00*
This website uses cookies to ensure the best experience possible. More information...