Dished Sprocket, 10 mm (~0,39 inches) offset, 18 Teeth
1/2 x 1/8
helps to bring the chain 10 mm (~0,39 inches) out
Fits to shimano, sachs, sram, stumey archer 3-speed hubs, histop, ... etc.
Depth: ~ 15 mm (~0,59 inches)
inner diameter: 35 mm
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
American-to-Euro Conversion kit
These beautifully machined aluminum bushings fit into the shell of a one-piece-crank bottom bracket, and are threaded to accept a:
standard threaded bottom bracket
normal 68 mm (~2,68 inches) width.
3 long CrMo bolts connect the two bushings to one another for a secure mounting.
Stickshifter for Shimano 3 speed
Solid stickshifter made of partial polished steel with black nicely moulded plastic knob
complete length: 14,5 cm
width of mount: 6,3 cm
speeds snap into place
mounts with two wholes for frame assembling
This gear lever was previously imported and distributed by The Chopperdome of 1055 LZ Amsterdam, Admiraal de Ruijterweg 346.
Stainless steel brake or shift cable clamp for 25.4 mm (~1 inch)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Thompson bottom bracket
Wedge bottom bracket
with cones, shells (40 mm (~1,57 inches)), ball rings, wedge axis 148 mm (~5,82 inches)
15.8 mm (~0,62 inches) diameter
The frame width / bottom bracket sleeve can be between 70 and 80 mm (~2,75 and 3,15 inches).
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth black
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Bottom Bracket Bearing Kit
for One Piece Cranks black
complete bottom bearing kit for one piece cranks
the internal diameter of the bearing shell for the BB lug is: 51,5 mm (~2,03 inches)
Bottom Bracket Bearing Kit
for One Piece Cranks
complete bottom bearing kit for one piece cranks
silver
the internal diameter of the bearing shell for the BB lug is: 51,5 mm (~2,03 inches)
Stainless steel brake or shift cable clamp for 31.8 mm (~1,25 inches)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Outer Cable Housing Silver Plaited Look Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Fat Bike bottom bracket M-WAVE for 120 mm (~4,72 inches) housing
silver
Fat Bike Bottom Bracket M-WAVE
for 120 mm (~4,72 inches) bottom bracket housing
sealed Indutrielager
Axle length L1: 179.5 mm (~7,07 inches)
L2: 28.7 mm (~1,13 inches) + washer 2.5 mm (~0,1 inches)
JIS
sealed industrial ball bearings
suitable for Shimano tools
Fat Bike Cartrige B.B. Set for 100mm housing
silver
for 100 mm bottom bracket housing
total length (L1): 159,50 mm (~6,28 inches)
L2: 25,5 mm (~1 inch)
430 gr.
BSA, JIS
sealed bearings
Dacromet coated axle
compatible with Shimano tools
Inner Cable Housing for gear shift 2,2 m (~86,61 inches)
made of stainless wire
diameter: 1,2 mm X 2200 mm (~0,047 x 86,61 inches)
with barrel nipple 4 x 4 mm (~0,16 x 0,16 inches)
ready greased
1 piece
Outer Cable Housing Glittering Red Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Frame mount for revo shifter black
steel
length: ~ 55 mm
Diameter of Tube: ~22 mm
For frame tubes till: ~ 25 mm
frame mount for revo shifter
powdercoated black matte
stainless steel screws and bolts
Chain Adjuster for single speed, fixies, BMX, ...
aluminium
arm length: 68 mm (~2,68 inches)
Weight: 110 gr. (~0,24 pounds)
To assemble it a cantilever pivot is needed.
Thread of the mounting screw: M10 x 1,0
Performance Crankset 3 Pieces 8 Star Axle
For US/BMX (Bottom Bracket shell - one piece crank)
For our 44 or 36 Teeth Chainwheels
Heavy Duty Quality
175 mm (~6,89 inhces) CROMO crank length Middle-Middle with 9/16 thread pedals
Axle length: 150 mm (~5,90 inches)
Axle diameter 19 mm (~0,75 inches)
Fat Bike Cartridge B.B. Set for 120mm housing
black
for 120 mm bottom bracket housing
total length (L1): 180 mm (~7,08 inches)
L2: 32 mm (~1,26 inch)
~ 400 gr.
BSA, JIS
sealed bearings
compatible with Shimano tools
Sturmey Archer 13/32 inch Serrated Lock Washer 7.9 mm slot
These essential washer incorporate serrations to keep the axle from slipping forward, and also features tabs that keep the axle from rotating in the frame due to pedaling torque.
Sturmey Archer 13/32 inch Serrated Lock Washer 7.9mm slot
Suitable for older Sturmey Archer 3 Speed and 5 Speed Hubs.
HMW155
1 piece
Outer Cable Housing Glittering Gold Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Inner Cable Housing for Brakes made of stainles steel 2 m (~2,19 yards)
"Speed Slick" for smoother and faster braking.
Diameter: 1.5mm x 2.00mm (~0,06 x 78,74 inches)
with pear nipples
Package included: 1 piece
for Shimano
Single Speed Converter kit
Two precision-machined spacers sandwich a single 18t-16t-14t cog to replace your entire 8, 9 or 10 speed cassette.
This item can help you to adjust the chainline
3 pinions /sprocket / cog steel: 18 Z, 16 Z, 14 T.
2 Spacer Alu: 20 mm (~0,79 inches), 13 mm (~0,51 inches)
Outer Cable Housing Light Green 2,50 m x 5 mm
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Stick Shifter
Steel
Lenght: 23 cm / 9,05 inch
max width: 6 cm / 2,36 inch
Screwed handle; without frame holder
The red and yellow "S" sticker is not included.
Special Part: Bottom Bracket axle 200 mm (~7,87 inches) wide, silver steel, burnished
Diameter: 19 mm (~0,75 inches)This 8 teeth axle is specially designed for wide rims and fits our Performance Crankset 3831 and 3832.
Made from original manufacturer
Outer Cable Housing Black Confetti Gloss 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
For mounting on the handlebar. We recommend left side below.
The throttle can be installed on the Greaser or the Outsider.It is connected to the controller (control unit) via the existing cables. The drive assistance from the engine can be controlled manually by the thumb throttle.
Fitts Greaser and Outsider!
Stick Shifter CLS 30 bent Sturmey Archer 3 - Speed
aluminium
length: 230 mm (~9,05 inches)
max. width: 60 mm (~2,36 inches)
shifter without frame holder and without side pull
The red and yellow sticker is not included.
RD-FT35-A-SS
The Shimano Tourney FT35 7-speed rear derailleur has a short cage and is compatible with 6/7-speed systems.
Ideal for older bikes or models with entry-level transmission systems, the Shimano Tourney FT35 7-speed rear derailleur offers reliable shifting performance in difficult terrain and riding conditions.
FEATURES
Less maintenance by suitable feature
Double tension rear derailleur
Wheel-type cable guide pulley for strong against cable bending
Enough lower profile, Enough ground clearance to avoid rear derailleur to hit obstacles
Upgraded appearance (RD-FT55)
Interchangeable with SHIMANO MTB 7/6-speed system
Front single use only
Compatible with 11T top rear sprocket (total capacity 17T)
Special Part
Bottom Brackets axle 165 mm (~6,50 inches) wide, silver steel, burnished
Diameter: 19 mm (~0,75 inches)This 8 teeth axle is specially designed for wide rims and fits our Performance Crankset 3831 and 3832.
Made from original manufacturer
€38.95*
This website uses cookies to ensure the best experience possible. More information...